Atmospherics

2018-03-09T04:03:46Z

23.91.249.15: Updated Kw of the AC unit to 6000 instead of 7000

[[Category:Atmospherics]]
{{Itembox
| name = Kit (Atmospherics)
| image = [[File:ItemKitAtmospherics.png]]
| createdwith = [[Hydraulic Pipe Bender]], [[Fabricator]]
| cost = 10g [[Iron]], 5g [[Gold]], 20g [[Copper]]
| stacks = no
}}
{{Structurebox
| name = Atmospherics
| image = [[File:Atmospherics front.jpg]]
| placement = Small Grid
| powerusage = 6000W
}}
=Air Conditioner Unit=
==Description==
Used to lower and raise the temperature fed through it from the input pipe. 
It has a range from -99 to 99 Celsius for the output

If the coolant pipe does not have 100kpa pressure it will divert output to coolant waste port to fill its coolant pipe

==Usage==
Place the Kit (Atmospherics) and run some pipes to the place you want to vent the heat. Place a few [[Pipe Radiator]]s on the pipe, fill it with whatever gas mixture you want. 
Make a return loop on the coolant system back to the coolant waste port for a slightly better efficiency. 
It will try to draw or expel heat to the coolant mix to make the input match the desired output.

=Filtration Unit=
==Description==
Used to filter out specific gasses and fluids from a mixture. 
it can filter out up to 2 things at once

==Usage==
Place the Kit (Atmospherics) and change the variant to Filtration. 
Place [[filter]]s in the machine for what you want to filter out. 
There are three filtration pipe connections. 
Filtration Input is where you connect the incoming atmosphere to be passed through the Filtration Atmospherics. 
Filtration Waste is the remaining mix after extracting whatever the filters did. 
Filtration Output is the filtered material for which you placed filters in the machine for.

Stationeers Community Wiki - User contributions [en]

Atmospherics