Sleeper

2025-04-07T21:39:24Z

2601:1C2:1400:3FE0:B413:734D:B3EE:8270: Corrected notes about being able to enter Sleeper with suit on

<languages/>
<translate>


[[Category:Machines]]
{{Itembox
| name = Kit (Sleeper)
| image = [[File:ItemKitSleeper.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 25g [[Steel]], 10g [[Gold]], 10g [[Copper]]
}}
{{Structurebox
| name = Sleeper
| power_usage = 100W
| placed_with_item = [[Kit (Sleeper)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Sleeper)]]
}}

== Description == 
A Sleeper stops the hunger timer while inside. Once properly setup and maintained, allows for controlled sleep giving a safe place to log off. No surrounding atmosphere needed to operate, but must take off suit in order to use. This makes it necessary to place the sleeper in a room which is habitable by the player relative to their species (if not robotic).

=== Basic Setup Example === 


[[File:Sleeper Basic Setup Example.png|frameless]]


* Build the [[Atmospherics| Filtration]], put in [[Filter| oxygen filter]] so it throws out the rest
* On the output build a [[Gas Tank Storage]] or similar.
* And a [[Pressure Regulator]] to feed a constant pressure to the sleeper (27-100kpa).
* [[Passive Vent]] or similar to eject the co2 from the waste output.


* Wire it up.
* put your suit airtank in the system (will use 4000kpa from it to charge the pipes).
* take your suit off and place in any available inventory (or in a nearby crate/hardsuit rack).
* Then turn on and jump in for a good nights rest.


This design works because the sleeper connector is bidirectional, and it needs a constant trickle of air flowing to draw out the co2 and clean it up.


Once you build larger systems you might want to feed the air at a proper temperature too, but fresh spawned characters have 20c oxygen tanks.


=== Advanced Setup Example ===
[[File:Advanced Sleeper setup.png|frameless|Sleeper advanced setup]]

This setup is fully autonomous and will take care of maintaining temperature, pressure as well filtering.

* Pressure Regulator is set to desired pressure (100kPa)
* It is important to place AC and [[Atmospherics| Filtration]] in the specified order
* Oxygen Tank could be any source of oxygen Build the [[Atmospherics| Filtration]], put in [[Filter| oxygen filter]] so it throws out the rest
* Set AC temp to something suitable (20°C)
* Build Heat sink similar to [[Guide (Air Conditioning)]], use any suitable coolant, but make sure to have at least 100kPa in heat sink pipe.

</translate>

Stationeers Community Wiki - User contributions [en]

Sleeper