Stationeers Community Wiki - User contributions [en]

Kit (Liquid Pipe)

2024-09-13T14:14:34Z

31.201.121.201:

<languages />
<translate>

[[Category:Atmospherics]]
{{Itembox
| name = Kit (Liquid Pipe)
| image = [[File:{{#setmainimage:ItemKitPipeLiquid.png}}]]
| cost = 0.5g [[Iron]]
| stacks = Yes, 20
| volume = 20L, 6Mpa
| createdwith = [[Hydraulic Pipe Bender]]
}}
{{Itembox
| name = Kit (Insulated Liquid Pipe)
| image = [[File:{{#setmainimage:ItemKitInsulatedLiquidPipe_Blue.png}}]]
| cost = 1g [[Silicon]], 1g [[Steel]]
| stacks = Yes, 20
| volume = 20L, 6Mpa
| createdwith = [[Hydraulic Pipe Bender]]
}}
Liquid pipes are designed to contain liquids, low-pressure gasses are OK, but they become stressed and may burst if the contents freezes solid.

The bursting pressure is 6,080 kPa which is only 10% of a gas pipe, but the 20L volume is double.
Pipes will be stressed (make a noise) when the pressure is greater than 4,864 kPa. This equals to 80% of the burst pressure.

There are the same variations as [[Pipes]]

Variants of liquid pipes:
<gallery mode='traditional'>
Image: PipeLiquid.png | Straight
Image: StructurePipeLiquidCorner.png | Corner
Image: StructurePipeLiquidTJunction.png | T-Junction
Image: StructurePipeLiquidCrossJunction.png | 4-Way Junction
Image: StructurePipeLiquidCrossJunction5.png | 5-Way Junction
Image: StructurePipeLiquidCrossJunction6.png | 6-Way Junction
Image: StructurePipeLiquidCrossJunction3.png | 3-Way Corner
Image: StructurePipeLiquidCrossJunction4.png | 4-Way Corner
</gallery>

Variants of insulated liquid pipes:

</translate>

Pipes

2024-09-13T14:14:31Z

31.201.121.201:

<languages />
<translate>

[[Category:Atmospherics]]
{{Itembox
| name = Kit (Pipe)
| image = [[File:{{#setmainimage:ItemKitPipe.png}}]]
| cost = 0.5g [[Iron]]
| stacks = Yes, 20
| volume = 10L, 60Mpa
| createdwith = [[Hydraulic Pipe Bender]]
}}
{{Itembox
| name = Kit (Insulated Pipe)
| image = [[File:{{#setmainimage:ItemKitInsulatedPipe.png}}]]
| cost = 1g [[Silicon]], 1g [[Steel]]
| stacks = Yes, 20
| volume = 10L, 60Mpa
| createdwith = [[Hydraulic Pipe Bender]]
}}
Pipes are used to transport gas. Pipes are one of the possible types of inputs/outputs from a structure (the others being [[Cables]], [[Chutes]], and [[Kit (Liquid Pipe)]]).

=== Tips === 


* Pipes can store some gas inside of them, which can be used with small airlocks to store gas when depressurizing
* Pipes will burst if the pressure differential between the inside pressure and outside atmosphere is greater than 60,795 kPa (60 MPa) (plus a random check to allow for short bursts over this limit)
* Pipes will be stressed (make a noise) when the pressure difference between inside and outside the pipe is greater than 48,636 kPa. This equals to 80% of the burst pressure.
* Pipes will also be stressed if a Liquid enters them. <code>Stress in % = 5000 x "liters of liquid" / "pipe network volume"</code>
* A contiguous pipe (not interrupted by valves, regulators, pumps etc.) of any length, will always have the same pressure, temperature and mixture over its entire length. No matter at what point of the pipe you're introducing new gases into the pipe, they will instantly and evenly "average out" over the entire pipe.

==Variations== 
Can be painted individually or by the stack with [[Spray Can]]. (consumes a single 'use' of the can either way, far more efficient to paint a full stack)

===Insulated===
Insulated pipes stop the exchange of heat between the pipe and it's surrounding environment

Pipes:
<gallery mode='traditional'>
Image: ItemPipeStraight.png | Straight
Image: ItemPipeCorner.png | Corner
Image: ItemPipeTJunction.png | T-Junction
Image: ItemPipeCrossJunction.png | 4-Way Junction
Image: ItemPipeCrossJunction5.png | 5-Way Junction
Image: ItemPipeCrossJunction6.png | 6-Way Junction
Image: ItemPipeCrossJunction3.png | 3-Way Corner
Image: ItemPipeCrossJunction4.png | 4-Way Corner
</gallery>
Insulated Pipes:
<gallery mode='traditional'>
Image: ItemInsulatedPipeStraight.png | Straight
Image: ItemInsulatedPipeCorner.png | Corner
Image: ItemInsulatedPipeTJunction.png | T-Junction
Image: ItemInsulatedPipeCrossJunction.png | 4-Way Junction
Image: ItemInsulatedPipeCrossJunction5.png | 5-Way Junction
Image: ItemInsulatedPipeCrossJunction6.png | 6-Way Junction
Image: ItemInsulatedPipeCrossJunction3.png | 3-Way Corner
Image: ItemInsulatedPipeCrossJunction4.png | 4-Way Corner
</gallery>

</translate>

Pipes

2024-09-13T14:00:00Z

31.201.121.201:

<languages />
<translate>

<Date mise a jour (19/05/2024"14:59)
[[Category:Atmospherics]]
{{Itembox
| name = Kit (Pipe)
| image = [[File:{{#setmainimage:ItemKitPipe.png}}]]
| cost = 0.5g [[Iron]]
| stacks = Yes, 20
| volume = 10L, 60Mpa
| createdwith = [[Hydraulic Pipe Bender]]
}}
{{Itembox
| name = Kit (Insulated Pipe)
| image = [[File:{{#setmainimage:ItemKitInsulatedPipe.png}}]]
| cost = 1g [[Silicon]], 1g [[Steel]]
| stacks = Yes, 20
| volume = 10L, 60Mpa
| createdwith = [[Hydraulic Pipe Bender]]
}}

Pipes are used to transport gas. Pipes are one of the possible types of inputs/outputs from a structure (the others being [[Cables]], [[Chutes]], and [[Kit (Liquid Pipe)]]).

=== Tips === 


* Pipes can store some gas inside of them, which can be used with small airlocks to store gas when depressurizing
* Pipes will burst if the pressure differential between the inside pressure and outside atmosphere is greater than 60,795KPa (60MPa) (plus a random check to allow for short bursts over this limit)
* Pipes will be stressed (make a noise) when the pressure difference between inside and outside the pipe is greater than 48,636kPa. This equals to 80% of the burst pressure.
* Pipes will also be stressed if a Liquid enters them. <code>Stress in % = 5000 x "liters of liquid" / "pipe network volume"</code>
* A contiguous pipe (not interrupted by valves, regulators, pumps etc.) of any length, will always have the same pressure, temperature and mixture over its entire length. No matter at what point of the pipe you're introducing new gases into the pipe, they will instantly and evenly "average out" over the entire pipe.

==Variations== 
Can be painted individually or by the stack with [[Spray Can]]. (consumes a single 'use' of the can either way, far more efficient to paint a full stack)

===Insulated===
Insulated pipes stop the exchange of heat between the pipe and it's surrounding environment

Pipes:
<gallery mode='traditional'>
Image: ItemPipeStraight.png | Straight
Image: ItemPipeCorner.png | Corner
Image: ItemPipeTJunction.png | T-Junction
Image: ItemPipeCrossJunction.png | 4-Way Junction
Image: ItemPipeCrossJunction5.png | 5-Way Junction
Image: ItemPipeCrossJunction6.png | 6-Way Junction
Image: ItemPipeCrossJunction3.png | 3-Way Corner
Image: ItemPipeCrossJunction4.png | 4-Way Corner
</gallery>
Insulated Pipes:
<gallery mode='traditional'>
Image: ItemInsulatedPipeStraight.png | Straight
Image: ItemInsulatedPipeCorner.png | Corner
Image: ItemInsulatedPipeTJunction.png | T-Junction
Image: ItemInsulatedPipeCrossJunction.png | 4-Way Junction
Image: ItemInsulatedPipeCrossJunction5.png | 5-Way Junction
Image: ItemInsulatedPipeCrossJunction6.png | 6-Way Junction
Image: ItemInsulatedPipeCrossJunction3.png | 3-Way Corner
Image: ItemInsulatedPipeCrossJunction4.png | 4-Way Corner
</gallery>

</translate>