Stationeers Community Wiki - User contributions [en]

Fuel

2024-04-28T17:58:32Z

82.131.13.20:

<translate>

There are two types of fuel, solid fuel and gas mixtures. The only solid fuel available in the game right now is Coal, coal can be used to fuel the [[Solid Fuel Generator]].
In order to use gasses for fuel you need a combustible gas combined with an oxygen source. The only flammable gas in the game is [[Volatiles]] (labeled as H2), the two oxygen sources are [[Oxygen]] (2:1 mix simply called fuel) and [[Nitrous Oxide]] (1:1 mix called superfuel).

=== Using Fuels ===

==== Fuel Combustion ====
Autoignition Temperature: 300℃ 
2 Volatiles + 1 O₂ -> 3 Pollutant + 6 CO₂ + 572kJ

==== Fuel Combustion Using a H2 Combustor ====
2 Volatiles + 1 O₂ -> 2 H₂O + 429kJ

==== Superfuel Combustion ====
Autoignition Temperature: 50℃ 
1 Volatiles + 1 N₂O -> 2 N₂ + 2 CO₂ + 572kJ

Note that staying below autoignition temperature means condensation for Nitrous Oxide at more than about 1MPa pressure, making it hard to store the fuel mix in large quantities without liquid management. While this reaction releases the same amount of energy as the classic fuel combustion above, it does so using half the volatiles and heating waste gases with less thermal mass resulting in higher temperatures.

== Mixing Fuel == 
You can easily mix fuel by adding O2 and H2 to a pipe network in order to put it into canisters or pump into a furnace.

H2 can be attained by melting the [[Ice (Volatiles)]] that can be found in some worlds while being part of the atmosphere of [[Worlds#Vulcan|Vulcan]]. O2 can be attained by melting the [[Ice (Oxite)]] or again from some atmospheres. N₂O is part of [[Ice (Nitrice)]] or can be created by the [[Nitrolyzer]].

Depending on how exact the proportions of your gas mixture are you will end up with different end temperatures and pressures after ignition.

==Basic Canister Mixing Setup== 
===Parts required===
* 2 x [[Portables Connector]]
* 2 x [[Portable Gas Tank]]
* 1 x [[Pipe Gas Mixer]]
* 1 x [[Gas Tank Storage]]
* ''n'' x [[Pipes]]
* ''n'' x [[Cables]]
* ''n'' x [[Gas Canister]]

===Setup=== 
# Place both Portable Connectors
# Connect both Portable Connectors to the the inputs of the Pipe Gas Mixer
# Connect the Pipe Gas Mixer output to the Gas Tank Storage input
# Connect the Pipe Gas Mixer power input to power source.

===Use=== 
# Put first Portable Gas Tank or scrubber filled with O2 on one Portables Connector.
# Put second Portable Gas Tank or scrubber filled with H2/volatile on the other Portables Connector.
# Use a wrench to connect both Portable Gas Tanks to their places.
# Optional: for a perfect fuel mix, ensure the temperatures of both gases are exactly the same.
# Set the Pipe Gas Mixer to desired combination (34% O2 + 66% H2) Note: as the combination is a floating point number, you can also enter 0.333... or 0.666... with a labeler to get a more precise mix.
# Turn on Pipe Gas Mixer
# Place an empty Gas Canister in Gas Tank Storage.
{{:Gases and Liquids/Menu}}
</translate>

Tank Connector

2024-04-28T17:36:12Z

82.131.13.20: Redirected page to Portables Connector

#REDIRECT [[Portables Connector]]

Portables Connector

2024-04-28T17:36:00Z

82.131.13.20:

[[Category:Items]]
{{Itembox
| name = Portables Connector
| image = [[File:ItemTankConnector.png]]
| volume = 100 L
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Iron]]
}}

==Description==

Formerly Tank Connector. Used to attach a [[Portable Tank]], [[Portable Air Scrubber]] or [[Portable Air Conditioner]] to a pipe network by using the [[Wrench]]. It has two pipe connections, one for liquids and one for gasses.

== Notes ==
* Pressure per tick 101.325kPa [202.65kPa per second)

Portable Generator

2024-04-28T11:59:27Z

82.131.13.20: /* Recipes */

{{Itembox
| image = [[File:DynamicGenerator.png]]
| name = Portable Generator
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 10g [[Iron]], 2g [[Gold]], 5g [[Copper]]
}}

==Description==
A portable machine used to charge [[Battery Cell]]s using [[Fuel|fuel]]. It can be attached to a [[Power Connector]] to supply power to a grid.

==Use==
Insert a [[Gas Canister|canister]] of [[Fuel|fuel]] into the slot on the left side. Insert battery in the slot above the power switch and hit the switch.

== Recipes ==

Since it consumes pressure, you can increase the output by supercooling it. Also the fuel mix ratio matters.

{| class="wikitable sortable"
|-
! Fuel mix ratio !! Temperature !! Power output
|-
| 25% O2 + 75% H2 || 20 °C || 235 W
|-
| 34% O2 + 66% H2 || 20 °C || 310 W
|-
| 25% O2 + 75% H2 || -36.4 °C || 291 W
|-
| 25% O2 + 75% H2 || -54.9 °C || 315 W
|-
| 25% O2 + 75% H2 || -99 °C || 395 W
|-
| 34% O2 + 66% H2 || -99 °C || 522 W
|-
| 34% O2 + 66% H2 || -271.7 °C || 60.9 KW
|}

Solar Panel

2024-04-27T20:41:01Z

82.131.13.20: /* Electronics Printer (Tier One) */

<languages/>
<translate>


[[Category:Machines]]
[[Category:Items]]
{{Itembox
| name = Kit (Solar Panel Basic)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]]
| cost = 10g [[Iron]], 2g [[Gold]], 10g [[Copper]]
| constructs = [[Solar Panel (Flat)]], [[Solar Panel (Angled)]]
| stacks = 5
| prefabhash = 844961456
| prefabname = ItemKitSolarPanelBasic
}}
{{Itembox
| name = Kit (Solar Panel)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]]
| cost = 5g [[Gold]], 20g [[Copper]], 15g [[Steel]]
| constructs = [[Solar Panel (Dual)]], [[Solar Panel]]
| stacks = 5
| prefabhash = -1924492105
| prefabname = ItemKitSolarPanel
}}
{{Itembox
| name = Kit (Solar Panel Basic Heavy)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]] (Tier Two)
| cost = 10g [[Copper]], 10g [[Steel]], 2g [[Electrum]], 10g [[Invar]]
| constructs = [[Solar Panel (Heavy Flat)]], [[Solar Panel (Heavy Angled)]]
| stacks = 5
| prefabhash = -528695432
| prefabname = x
}}
{{Itembox
| name = Kit (Solar Panel Heavy)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]] (Tier Two)
| cost = 20g [[Copper]], 10g [[Steel]], 5g [[Electrum]], 15g [[Astroloy]]
| constructs = [[Solar Panel (Heavy Dual)]], [[Solar Panel (Heavy)]]
| stacks = 5
| prefabhash = -364868685
| prefabname = x
}}
{{Structurebox
| name = Solar Panel
| power_usage = 0W to 500W generated
| placed_with_item = [[Kit (Solar Panel)]]
| placed_on_grid = Large Grid
| const_with_item1 = [[Glass Sheets|Glass Sheet]]
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Solar Panel)]]
| decon_with_tool2 = [[Crowbar]]
| item_rec2 = [[Glass Sheets|Glass Sheet]]
| prefab_hash = -2045627372
| prefab_name = StructureSolarPanel
}}
{{Structurebox
| name = Solar Panel (Dual)
| power_usage = 0W to 500W generated
| placed_with_item = [[Kit (Solar Panel)]]
| placed_on_grid = Large Grid
| const_with_item1 = [[Glass Sheets|Glass Sheet]]
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Solar Panel)]]
| decon_with_tool2 = [[Crowbar]]
| item_rec2 = [[Glass Sheets|Glass Sheet]]
| prefab_hash = -539224550
| prefab_name = StructureSolarPanelDual
}}

== Description == 
The '''Solar Panel''' generates power by absorbing sunlight, depending on solar intensity, up to 500W per panel on the moon. Can be manually rotated using a [[Wrench]]. Can be built in two configurations, one with opposite side split power/data ports, or two with same side combined power/data ports.

Data ports can interact with [https://stationeers-wiki.com/Sensors#Daylight_Sensor Daylight Sensors] and [[Kit (Logic I/O)|logic i/o writers or batch writers]] to automatically rotate the panel to face the sun.

At the extreme attitude settings (0/100) the solar panel still faces 15 degrees above the horizon. Thus the total arc of vertical rotation is only 150 degrees from input values 0-100.

Can also be destroyed by [[Storm|storms]], or left with very little health. Best course of action is to remove the solar panels when you are notified of a [[storm]] by a [[Weather Station]], Which allows you to replace them once the [[storm]] is over.

They can be repaired with [[Duct Tape]], or by dissembling them and reassembling them. You could even cover them with windows to protect them from [[Storm|storms]] at the cost of some efficiency of the panels themselves being lost. And Heavy Solar Panels are a more expensive version that do not take [[storm]] damage but it is debatable if its worth making the tier 2 metal [[Astroloy]] to prevent [[storm]] damage whilst retaining maximum efficiency.

== Types of Solar Panel Kit == 
=== Printed with the Electronics Printer (Tier One) ===
These are useful early on when resources are limited.
*'''Kit (Solar Panel Basic)''' don't have logic inputs so they can't be set up to automatically track the sun and spend most of their time at reduced power output.
*'''Kit (Solar Panels)''' have logic inputs and can be [[Solar Logic Circuits Guide|programmed to track the sun]] for optimal power output.

=== Printed with the Electronics Printer (Tier Two) ===
These are protected against [[Storm|storm]] damage, but more expensive. Note that not all planets have storms.
*'''Kit (Solar Panel Basic Heavy)''' don't have logic inputs.
*'''Kit (Solar Panel Heavy)''' have logic inputs.

== Positioning == 

Pay close attention to the positioning of your solar panel since their automation will depend heavily on it.
Most user-made scripts and guides orient the panels with the data port facing sunset and the power port facing sunrise.

[[File:Solar panel yaw-Horizontal setting.png|400x300px|solar panel horizontal rotation]]

==Notes== 
After placement be sure to install one [[Glass Sheets|Glass Sheet]] to make it functional.

See [[Sensors]] and [[Solar_Logic_Circuits_Guide]] for panel automation using logic circuits.

==Power output of a single Solar Panel on different planets==
{| class="wikitable"
|-
! World !! Solar Energy !! % of Earth !! Solar Angle
|-
| [[Worlds#Moon|Moon]] || 500W || 100% || 0°
|-
| [[Worlds#Mars|Mars]] || 455W || 91% || 8°
|-
| [[Worlds#Europa|Europa]] || 210W || 42% || 32°
|-
| [[Worlds#Mimas|Mimas]] || 90W || 18% || 126°
|-
| [[Worlds#Space|Asteroid belt]] || 500W || 100% || 0°
|-
| [[Worlds#Loulan|Loulan]] || 455W || 91% || 8°
|-
| [[Worlds#Vulcan|Vulcan]] || 750W || 150% || 48°
|-
| [[Worlds#Venus|Venus]] || 500W || 100% || 0°
|-
|}

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Horizontal || Degrees || Set the horizontal rotation of the Solar Panel (clockwise, 0-360°, data port is at 270°)
|-
| Vertical || Degrees || Sets the vertical angle of the Solar Panel (As of at least version 0.2.3263.16264, solar panels accept input in degrees above the horizon instead of in percent, so the solar panels travel between inputs of 15 and 165, with 90 being straight up. Previously, this was supposedly a Percentage "accepting 0-100% which translates to 15°-165°, 50%=90° =zenith")
|-
| On || Boolean || Turns the solar panel on or off
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Charge || W || Returns the power generated in Watts
|-
| Horizontal || degrees || Returns the horizontal rotation of the Solar Panel
|-
| Vertical || % || Returns the vertical angle of the Solar Panel
|-
| Maximum || W || Maximum possible power for this planet
|-
| Ratio || || How close to maximum current performance is, 1.0 means panel is perfectly directed and unobstructed
|-
| On || Boolean || Returns the on/off state of the solar panel
|}
</translate>

Solar Panel

2024-04-27T20:39:48Z

82.131.13.20:

<languages/>
<translate>


[[Category:Machines]]
[[Category:Items]]
{{Itembox
| name = Kit (Solar Panel Basic)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]]
| cost = 10g [[Iron]], 2g [[Gold]], 10g [[Copper]]
| constructs = [[Solar Panel (Flat)]], [[Solar Panel (Angled)]]
| stacks = 5
| prefabhash = 844961456
| prefabname = ItemKitSolarPanelBasic
}}
{{Itembox
| name = Kit (Solar Panel)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]]
| cost = 5g [[Gold]], 20g [[Copper]], 15g [[Steel]]
| constructs = [[Solar Panel (Dual)]], [[Solar Panel]]
| stacks = 5
| prefabhash = -1924492105
| prefabname = ItemKitSolarPanel
}}
{{Itembox
| name = Kit (Solar Panel Basic Heavy)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]] (Tier Two)
| cost = 10g [[Copper]], 10g [[Steel]], 2g [[Electrum]], 10g [[Invar]]
| constructs = [[Solar Panel (Heavy Flat)]], [[Solar Panel (Heavy Angled)]]
| stacks = 5
| prefabhash = -528695432
| prefabname = x
}}
{{Itembox
| name = Kit (Solar Panel Heavy)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]] (Tier Two)
| cost = 20g [[Copper]], 10g [[Steel]], 5g [[Electrum]], 15g [[Astroloy]]
| constructs = [[Solar Panel (Heavy Dual)]], [[Solar Panel (Heavy)]]
| stacks = 5
| prefabhash = -364868685
| prefabname = x
}}
{{Structurebox
| name = Solar Panel
| power_usage = 0W to 500W generated
| placed_with_item = [[Kit (Solar Panel)]]
| placed_on_grid = Large Grid
| const_with_item1 = [[Glass Sheets|Glass Sheet]]
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Solar Panel)]]
| decon_with_tool2 = [[Crowbar]]
| item_rec2 = [[Glass Sheets|Glass Sheet]]
| prefab_hash = -2045627372
| prefab_name = StructureSolarPanel
}}
{{Structurebox
| name = Solar Panel (Dual)
| power_usage = 0W to 500W generated
| placed_with_item = [[Kit (Solar Panel)]]
| placed_on_grid = Large Grid
| const_with_item1 = [[Glass Sheets|Glass Sheet]]
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Solar Panel)]]
| decon_with_tool2 = [[Crowbar]]
| item_rec2 = [[Glass Sheets|Glass Sheet]]
| prefab_hash = -539224550
| prefab_name = StructureSolarPanelDual
}}

== Description == 
The '''Solar Panel''' generates power by absorbing sunlight, depending on solar intensity, up to 500W per panel on the moon. Can be manually rotated using a [[Wrench]]. Can be built in two configurations, one with opposite side split power/data ports, or two with same side combined power/data ports.

Data ports can interact with [https://stationeers-wiki.com/Sensors#Daylight_Sensor Daylight Sensors] and [[Kit (Logic I/O)|logic i/o writers or batch writers]] to automatically rotate the panel to face the sun.

At the extreme attitude settings (0/100) the solar panel still faces 15 degrees above the horizon. Thus the total arc of vertical rotation is only 150 degrees from input values 0-100.

Can also be destroyed by [[Storm|storms]], or left with very little health. Best course of action is to remove the solar panels when you are notified of a [[storm]] by a [[Weather Station]], Which allows you to replace them once the [[storm]] is over.

They can be repaired with [[Duct Tape]], or by dissembling them and reassembling them. You could even cover them with windows to protect them from [[Storm|storms]] at the cost of some efficiency of the panels themselves being lost. And Heavy Solar Panels are a more expensive version that do not take [[storm]] damage but it is debatable if its worth making the tier 2 metal [[Astroloy]] to prevent [[storm]] damage whilst retaining maximum efficiency.

== Types of Solar Panel Kit == 
=== Electronics Printer (Tier One) ===
These are useful early on when resources are limited.
*'''Kit (Solar Panel Basic)''' don't have logic inputs so they can't be set up to automatically track the sun and spend most of their time at reduced power output.
*'''Kit (Solar Panels)''' have logic inputs and can be [[Solar Logic Circuits Guide|programmed to track the sun]] for optimal power output.
=== Printed with the Electronics Printer (Tier Two) ===
These are protected against [[Storm|storm]] damage, but more expensive. Note that not all planets have storms.
*'''Kit (Solar Panel Basic Heavy)''' don't have logic inputs.
*'''Kit (Solar Panel Heavy)''' have logic inputs.

== Positioning == 

Pay close attention to the positioning of your solar panel since their automation will depend heavily on it.
Most user-made scripts and guides orient the panels with the data port facing sunset and the power port facing sunrise.

[[File:Solar panel yaw-Horizontal setting.png|400x300px|solar panel horizontal rotation]]

==Notes== 
After placement be sure to install one [[Glass Sheets|Glass Sheet]] to make it functional.

See [[Sensors]] and [[Solar_Logic_Circuits_Guide]] for panel automation using logic circuits.

==Power output of a single Solar Panel on different planets==
{| class="wikitable"
|-
! World !! Solar Energy !! % of Earth !! Solar Angle
|-
| [[Worlds#Moon|Moon]] || 500W || 100% || 0°
|-
| [[Worlds#Mars|Mars]] || 455W || 91% || 8°
|-
| [[Worlds#Europa|Europa]] || 210W || 42% || 32°
|-
| [[Worlds#Mimas|Mimas]] || 90W || 18% || 126°
|-
| [[Worlds#Space|Asteroid belt]] || 500W || 100% || 0°
|-
| [[Worlds#Loulan|Loulan]] || 455W || 91% || 8°
|-
| [[Worlds#Vulcan|Vulcan]] || 750W || 150% || 48°
|-
| [[Worlds#Venus|Venus]] || 500W || 100% || 0°
|-
|}

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Horizontal || Degrees || Set the horizontal rotation of the Solar Panel (clockwise, 0-360°, data port is at 270°)
|-
| Vertical || Degrees || Sets the vertical angle of the Solar Panel (As of at least version 0.2.3263.16264, solar panels accept input in degrees above the horizon instead of in percent, so the solar panels travel between inputs of 15 and 165, with 90 being straight up. Previously, this was supposedly a Percentage "accepting 0-100% which translates to 15°-165°, 50%=90° =zenith")
|-
| On || Boolean || Turns the solar panel on or off
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Charge || W || Returns the power generated in Watts
|-
| Horizontal || degrees || Returns the horizontal rotation of the Solar Panel
|-
| Vertical || % || Returns the vertical angle of the Solar Panel
|-
| Maximum || W || Maximum possible power for this planet
|-
| Ratio || || How close to maximum current performance is, 1.0 means panel is perfectly directed and unobstructed
|-
| On || Boolean || Returns the on/off state of the solar panel
|}
</translate>

Guide (Airlock) Atmosphere to Vacuum

2024-04-27T12:30:30Z

82.131.13.20: /* Materials */

[[Category:Guides]][[Category:Atmospherics]]
<languages/>
<translate>
==Description==
An Atmosphere to Vacuum Airlock is a [[Room]] that can evacuate and refill its internal volume with the [[Atmosphere]] connected to it. It has two or more airtight [[Portal]]s which all do not open simultaneously. An Atmosphere to Vacuum Airlock allows passage between a pressurized environment and a (near) vacuum environment without the loss of [[Pressure]].

An Atmosphere to Vacuum Airlock can be controlled automatically using a [[Circuitboard (Airlock)]] installed within a [[Console]] which will refer to the pressurized environment as "interior" and the vacuum environment as "exterior".

When activated with the interior-portal open, the system will automatically close the interior-portal and will activate all selected [[Active Vent]]s to try to evacuate the interior-atmosphere from the airlock chamber. Only after a total vacuum is achieved within all of the [[Large Grid Atmosphere|Large Grid Volume]]s in which selected [[Gas Sensor]]s reside will the exterior-portal automatically open.

When activated with the exterior-portal open, the system will automatically close the exterior-portal and will activate all selected [[Active Vent]]s to pressurize the chamber with interior-atmosphere. Only after the airlock's internal pressure equals or exceeds 101 kPa will the interior-portal automatically open.

==Materials==
The minimum material requirements for an Atmosphere to Vacuum Airlock chamber are:
* 2 x [[Portal]]s: variants of either [[Kit (Airlock)]], [[Kit (Blast Door)]], [[Kit (Door)]], or [[Kit (Docking Port)]]
* ''n'' x Materials for finishing the construction of the portal. For example [[Composite Door]] requires 1 x [[Plastic Sheets]] and 1 x [[Glass Sheets]].
* 1 x [[Kit (Consoles) Console]]
* 1 x [[Circuitboard (Airlock)]] to determine the function of the console
* 1 x [[Glass Sheets]] for finishing the construction of the console
* 1 x [[Data Disk]] for programming of the console
* 1 x [[Kit (Sensors) Gas Sensor]]
* 1 x [[Kit (Active Vent)]]
* 2 x [[Kit (Pipe)]]
* ''n'' x [[Cable Coil]]
Optional materials:
* 1 x [[Kit (Passive Vent)]]
* 1 x [[Kit (Flashing Light)]] or 1 x [[Kit (Lights)]] + 1 x [[Spray Paint]]
* 1 x [[Kit (Power Controller)]]

==Construction==
A minimum Atmosphere to Vacuum Airlock can be constructed using the following instructions:

# Place both [[Portal]]s one [[Large Grid]] apart with the power and data ports facing into the airlock's interior.
# Using the [[Labeller]], rename each door as "Interior-Door" and "Exterior-Door" appropriately. Note that some doors have their tag sprayed onto them, so a different name may be more appealing, as long as its distinguishable.
# Ensure the "Exterior-Door" is OPEN, and the "Interior-Door" is CLOSED.
# Enclose the four remaining sides of the airlock chamber with airtight frames, walls, or windows.
# Place [[Console]], [[Active Vent]], [[Gas Sensor]], and optional [[Flashing Light]] or [[Kit (Lights)]] (and color it using [[Spray Paint]]) and [[Power Controller]] somewhere within the airlock's interior.
# Ensure all placed devices are attached to the same [[Wire Network]] including the portals' power and data ports.
# Ensure the airlock's wire network is connected to an active [[Power Supply]] and all devices can receive power.
# Attach a [[Pipe Network]] to the Active Vent large enough to hold the volume of the airlock or pass it through to a [[Passive Vent]] placed in the "interior" environment.
# Ensure the "interior" pipe network is not connected to any other pipe network.
# Insert Circuitboard (Airlock) into the console, then place the [[Glass Sheet]] onto the console.
# Insert Data Disk into the side slot of Console then power on the Console.
# Use the console's up and down arrows to scroll through the list of devices. Click to select. Click again to deselect if incorrect
# Find and click "Exterior-Door" followed by all caps and green "EXTERIOR". NOTE: OF THE DOORS, SELECT THIS FIRST!
# Ensure the Exterior-Door's lock-indicator has turned from green to red.
# Find and click "Interior-Door" followed by all caps and green "INTERIOR".
# Ensure the Interior-Door's lock-indicator has turned from green to red.
# Find and click "Active Vent" followed by all caps and green "VENT".
# Find and click "Gas Sensor" followed by all caps and green "SENSOR".
# Find and click "Flashing Light" or "Light" followed by all caps and green "LIGHT". (optional)
# Remove Data Disk from the side slot of Console.
 If there is an error the console screen will say so and the power light will flash yellow.
Note that the text BEFORE the green is the name of the object and the text IN green is what slot on the circuitboard it will be linked to. These are filtered, so you cannot link a sensor to a door slot and vice versa.
Also notice what the green text says after your doors and how that changes when selecting a door; It will ask for the 'Exterior' door first and 'Interior' door second.

==Troubleshooting==
When powered, all associated doors and vents are locked, preventing their manual use even when power is subsequently denied. This can be a problem when trapped within an airlock during a power outage. Best practise is to ensure the airlock's wire network is connected to an emergency [[Power Supply]] such as a [[Battery Cell]] equipped [[Power Controller]].

A pressurization phase will stall if there is not enough gas available to the selected [[Active Vent]]s to reach 101 kPa. Stalled pressurizations can be skipped by clicking the yellow "Cancel Pressurize" button on a console.

An airlock depressurization phase will not complete until the [[Large Grid Atmosphere|Large Grid Volume]]s in which all selected [[Gas Sensor]]s reside are depleted of atmosphere. A leak from a pressurized environment into the airlock might cause the depressurization phase to stall. Stalled depressurizations can be skipped by clicking the yellow "Cancel Depressurize" button on a console.

In larger airlocks, ensure there is one Gas Sensor per Large Grid to prevent the premature opening of the exterior portal and the resulting loss of atmosphere, or install the [[Active Vent]] in the same [[Large Grid Atmosphere|Large Grid Volume]] where the exterior door is and the [[Gas Sensor]] in the same [[Large Grid Atmosphere|Large Grid Volume]] as the interior door or wherever is the furthest away from the [[Active Vent]], as that will be the last volume becoming a vacuum.

Disconnecting objects may confuse the circuitboard, may prevent selection of different objects or lock out objects from manual interaction. This is not intended behaviour, but disconnecting the console from the rest and / or disassembling the console one or more times generally solves those kinds of issues. That will also clear the console of any past objects that either aren't connected anymore or have been renamed. It's annoying and can be dangerous if you fiddle with these setups (beyond regular use) whilst low on oxygen, hydration or nourishment, so be aware of that.

==See Also==
* [[Guide (Airlock)]]
* [[Guide (Airlock) Atmosphere to Atmosphere]]
* [[Guide (Airlock) Docking Ports]]

* [[Circuitboard (Advanced Airlock)]]
* [[Circuitboard (Airlock)]]
* [[Kit (Airlock)]]
</translate>