Stationeers Community Wiki - User contributions [en]

Gas Canister

2023-12-26T09:20:22Z

Chrisbitz: /* Notes */

[[Category:Items]]
[[Category:Atmospherics]]
<languages />
<translate>

{{Itembox
| name = Canister
| image = [[File:ItemGasCanisterEmpty.png]]
| maxpressure = 10132.5 kPa
| volume = 64 L
| createdwith = [[Hydraulic Pipe Bender]], [[Fabricator]]
| cost = 5g [[Iron]]
}}

== Description == 
Gas [[Canister]] is used to store gasses. The gasses can then be output at a rate of 101.325 kPa per tick. Over-pressurizing the canister will cause it to explode. The "standard pressure" when spawned is defined as 8106 kPa, or 80 Earth Atmospheres. The maximum pressure for a canister is 10.132 MPa, or 100 atmospheres. Its internal volume is 64 Litres.

==Usage==
To fill the canister, place it into a [[Gas Tank Storage]] unit connected to a pipe network carrying gas (equalising the pressure in the network and canister). It can also be refilled by inserting it into the striped area above of the [[Portable Tank]].

When held in the hands or directly from the spacesuit, a canister can be opened, causing its contents to equalise with the atmosphere (or contents of a sealed room).

==Used In==
* [[EVA Suit]] and [[Hardsuit]] for Breathable Gas and Waste
* EVA [[Spacepack]] and [[Hardsuit Jetpack]] for Propulsion Gas
* [[Welder]] for Fuel
* [[Portable Generator]] for Fuel

==Notes==
* If you need higher pressure (and thus higher capacity) canisters, consider using [[Gas Canister (Smart)]], which have visible display of tank pressure and a pressure capacity twice that of the standard Gas [[Canister]].

* Default colour marking in Stationeers:
{| class=wikitable
! [[Spray Paint|Blue]]
| [[Water|H2O]] (Water)
|-
! [[Spray Paint|Green]]
| [[Nitrogen|N2]] (Nitrogen) [[Nitrous Oxide|N2O]] (Nitrous Oxide)
|-
! [[Spray Paint|Grey]]
| [[Carbon Dioxide|CO2]] (Carbon Dioxide) [[Pollutant|X]] (Pollutant)
|-
! [[Spray Paint|Orange]]
| [[Fuel]] (H2 66% + O2 34%)
|-
! [[Spray Paint|Red]]
| [[Volatiles|H2]] (Hydrogen / Volatiles)
|-
! [[Spray Paint|White]]
| [[Oxygen|O2]] (Oxygen) [[Air]] (as defined in-game as O2 25% + N2 75%) ('''Note:''' don't use O2/N2 mix in your suit, just use pure O2)
|-
! [[Spray Paint|Yellow]]
| Stock colour after manufacturing (Empty)
|}

* Other common (player) colour markings in Stationeers:
{| class=wikitable
! [[Spray Paint|Black]]
| [[Pollutant|X]] (Pollutant, replacing Grey)
|-
! [[Spray Paint|Khaki]]
| [[Air]] (as defined in-game as O2 25% + N2 75%, replacing White) [[Air 20/80]] (Earth Standard, less 1% Argon) [[Nitrox 35/65]] (alternate breathable mixture)
|-
! [[Spray Paint|Pink]]
| Hydroponic Air (any breathable mix with also including >2% [[Carbon Dioxide|CO2]])
|-
! [[Spray Paint|Purple]]
| Exhaust Gas (any High Pressure / Temperature mix including [[Pollutant|X]] and [[Carbon Dioxide|CO2]])
|-
! [[Spray Paint|Brown]]
| Body-specific Atmospheric Gas
|-
! [[Spray Paint|Yellow]]
| Waste / Exhaled Gas (per default Waste Canister)
|}

* Note that Stationeers Gas Standards vary compared to those used on Earth, as listed on Wikipedia: https://en.wikipedia.org/wiki/Bottled_gas#Specific_gases

== Variants ==
<gallery>
File:ItemGasCanisterCarbonDioxide.png|[[Carbon Dioxide|Carbon Dioxide (CO2)]]
File:ItemGasCanisterEmpty.png|Empty
File:ItemGasCanisterFuel.png|[[Fuel]]
File:ItemGasCanisterNitrogen.png|[[Nitrogen|Nitrogen (N2)]]
File:ItemGasCanisterOxygen.png|[[Oxygen|Oxygen (O2)]]
File:ItemGasCanisterPollutants.png|[[Pollutant|Pollutant (X)]]
File:ItemGasCanisterVolatiles.png|[[Volatiles]]
</gallery>

</translate>

Pipe Gas Mixer

2020-08-17T07:23:54Z

Chrisbitz: Removed pointless description "behaves Oddly"

<languages />
<translate>

{{Itembox
| name = Pipe Gas Mixer
| image = [[File:ItemPipeGasMixer.png]]
| stacks = 1
| createdwith = [[Hydraulic Pipe Bender]], [[Fabricator]]
| cost = 2g [[Iron]], 2g [[Gold]], 2g [[Copper]]
}}

== Description == 
Used to mix two gasses in proportions ranging from 0-100%. A must have for the [[Furnace]]. Input 1 is the straight thorough route, and Input 2 is the side entry.

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Lock || Boolean ||
|-
| Setting || float || Correspond to the percentage value of the Input 1
|-
| On || Boolean ||
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean ||
|-
| Error || Boolean ||
|-
| Lock || Boolean ||
|-
| Setting || float || Contains the current Input 1 value in percent (60.5 for example)
|-
| Maximum || float || Value of 100
|-
| Ratio || Float || Contains the ratio corresponding to the Input 1 value (0.605, for the 60.5 value above)
|-
| On || Boolean ||
|-
| Requiredpower || Integer || In Watts. The Gas Mixer require 100W of power to function
|-
|}

</translate>

Fabricator

2020-08-09T07:56:15Z

Chrisbitz:

Deprecated / No Longer in Game
<languages />
<translate>

[[Category:Machines]]
{{Itembox
| name = Kit (Fabricator)
| image = [[File:ItemKitFabricator.png]]
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 50g [[Iron]], 5g [[Gold]], 20g [[Copper]]
}}


{{Structurebox
| name = Fabricator
| image = [[File:Fabricator.jpg]]
| power_usage = 50W + Recipe Usage
| placed_with_item = [[Kit (Fabricator)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Fabricator)]]
}}

== Description == 
Note: The Fabricator was removed from the game in version 0.2.2479.11384.

The [[Fabricator]] is an advanced machine used to manufacture most of the craftable items in the game. It largely fills the role of the [[Autolathe]], [[Electronics Printer]], [[Hydraulic Pipe Bender]] and [[Tool Manufactory]].

However at current version one can not search a recipe like other dedicated printers, making it less convenient.

It also manufactures certain items slower then the dedicated printers. For example, it's much faster to print a [[Cable Coil|cable coil]] using [[Electronics Printer|electronics printer]] than using a fabricator.

== Usage == 
In order to use the fabricator, you will need to set up a [[Computer]] with a [[Motherboard (Manufacturing)]] and connect it to the fabricator's data port. You can then use the manufacturing interface in order to request manufacturing jobs from the fabricator.
You can choose the quantity of each item you want to build and set up a queue of items to be manufactured. If the fabricator is unable to finish an item, it will idle until it is able to continue (materials are added or power is resumed).


''Fabricator with computer hooked up'' 
[[File:Fabricator_computer.jpg|Fabricator with computer hooked up]]

== Recipes == 
'''Used to create:'''
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
* [[Cables|Cable Coil]]
* [[Chutes|Construction Kit (Chutes)]]
* [[Pipes|Construction Kit (Pipe)]]
* [[Kit (Wall)]]
* [[Floor Grating]]
* [[Glass Sheets]]
* [[Iron Frames]]
* [[Iron Sheets]]
* [[Kit (Arc Furnace)]]
* [[Autolathe|Kit (Autolathe)]]
* [[Kit (Door)]]
* [[Electronics Printer|Kit (Electronics Printer)]]
* [[Furnace|Kit (Furnace)]]
* [[Hydraulic Pipe Bender|Kit (Hydraulic Pipe Bender)]]
* [[Iron Walls|Kit (Iron Walls)]]
* [[Locker|Kit (Locker)]]
* [[Stairs|Kit (Stairs)]]
* [[Tool Manufactory|Kit (Tool Manufactory)]]
* [[Steel Frames]]
* [[Steel Sheets]]
* [[Kit (Lights)]]
* '''And many more!'''
</div>

'''UNABLE to create:'''
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
* [[Spray Paint | Any paints]] (use [[Tool Manufactory|Kit (Tool Manufactory)]])
* [[Portable Tank]] (use [[Hydraulic Pipe Bender|Kit (Hydraulic Pipe Bender)]])
* [[Portable Light]]
* [[Ground Penetrating Radar]]
* [[Plastic Sheets]]
* '''And some more!'''
</div>

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Open || Boolean || Opens the Fabricator, when set to 1. Closes it, when set to 0.
|-
| Activate || Boolean || Activates the Fabricator, when set to 1. Deactivates it, when set to 0.
|-
| Lock || Boolean || Locks the Fabricator, when set to 1. Unlocks it, when set to 0.
|-
| On || Boolean || Turns the Fabricator on, when set to 1. Turns it off, when set to 0.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Fabricator is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Fabricator is open. (0 for no, 1 for yes)
|-
| Error || Boolean || Returns whether the Fabricator is flashing an error. (0 for no, 1 for yes)
|-
| Activate || Boolean || Returns whether the Fabricator is active. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Fabricator is locked. (0 for no, 1 for yes)
|-
| Reagents || Float || The amount of reagent contents in the Fabricator in grams.
|-
| On || Boolean || Returns whether the Fabricator is turned on. (0 for no, 1 for yes)
|-
| ImportQuantity || (Unknown) || (Unknown)
|-
| ImportSlotOccupant || Boolean || Returns whether there is something in the import slot of the Fabricator. (0 for no, 1 for yes) (Only turns 1 briefly, when something is inserted in the Fabricator)
|-
| ExportQuantity || Integer || Returns the amount of items in the export slot of the Fabricator. The export slot also encompasses whatever is currently being fabricated in the Fabricator.
|-
| ExportSlotOccupant || Boolean || Returns whether the export slot of the Fabricator holds an item. The export slot also encompasses whatever is currently being fabricated in the Fabricator.
|-
| RequiredPower || Integer || The amount of power, currently needed by the Fabricator, in watts.
|}

== Bugs ==
* If the Fabricator is deconstructed while fabricating an item, the complete [''glowing!''] item will be left behind along with any other reagents in the Fabricator.
* If the Fabricator is opened while fabricating an item (paused and unpaused), it will not drop any reagents it holds.
</translate>

Fabricator

2020-08-09T07:55:40Z

Chrisbitz: Fabricator was removed text

Deprecated / No Longer in Game
<languages />
<translate>

[[Category:Machines]]
{{Itembox
| name = Kit (Fabricator)
| image = [[File:ItemKitFabricator.png]]
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 50g [[Iron]], 5g [[Gold]], 20g [[Copper]]
}}


{{Structurebox
| name = Fabricator
| image = [[File:Fabricator.jpg]]
| power_usage = 50W + Recipe Usage
| placed_with_item = [[Kit (Fabricator)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Fabricator)]]
}}

== Description == 
Note: The Fabricator was removed from the game in version 0.2.2479.11384.
The [[Fabricator]] is an advanced machine used to manufacture most of the craftable items in the game. It largely fills the role of the [[Autolathe]], [[Electronics Printer]], [[Hydraulic Pipe Bender]] and [[Tool Manufactory]].

However at current version one can not search a recipe like other dedicated printers, making it less convenient.

It also manufactures certain items slower then the dedicated printers. For example, it's much faster to print a [[Cable Coil|cable coil]] using [[Electronics Printer|electronics printer]] than using a fabricator.

== Usage == 
In order to use the fabricator, you will need to set up a [[Computer]] with a [[Motherboard (Manufacturing)]] and connect it to the fabricator's data port. You can then use the manufacturing interface in order to request manufacturing jobs from the fabricator.
You can choose the quantity of each item you want to build and set up a queue of items to be manufactured. If the fabricator is unable to finish an item, it will idle until it is able to continue (materials are added or power is resumed).


''Fabricator with computer hooked up'' 
[[File:Fabricator_computer.jpg|Fabricator with computer hooked up]]

== Recipes == 
'''Used to create:'''
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
* [[Cables|Cable Coil]]
* [[Chutes|Construction Kit (Chutes)]]
* [[Pipes|Construction Kit (Pipe)]]
* [[Kit (Wall)]]
* [[Floor Grating]]
* [[Glass Sheets]]
* [[Iron Frames]]
* [[Iron Sheets]]
* [[Kit (Arc Furnace)]]
* [[Autolathe|Kit (Autolathe)]]
* [[Kit (Door)]]
* [[Electronics Printer|Kit (Electronics Printer)]]
* [[Furnace|Kit (Furnace)]]
* [[Hydraulic Pipe Bender|Kit (Hydraulic Pipe Bender)]]
* [[Iron Walls|Kit (Iron Walls)]]
* [[Locker|Kit (Locker)]]
* [[Stairs|Kit (Stairs)]]
* [[Tool Manufactory|Kit (Tool Manufactory)]]
* [[Steel Frames]]
* [[Steel Sheets]]
* [[Kit (Lights)]]
* '''And many more!'''
</div>

'''UNABLE to create:'''
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
* [[Spray Paint | Any paints]] (use [[Tool Manufactory|Kit (Tool Manufactory)]])
* [[Portable Tank]] (use [[Hydraulic Pipe Bender|Kit (Hydraulic Pipe Bender)]])
* [[Portable Light]]
* [[Ground Penetrating Radar]]
* [[Plastic Sheets]]
* '''And some more!'''
</div>

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Open || Boolean || Opens the Fabricator, when set to 1. Closes it, when set to 0.
|-
| Activate || Boolean || Activates the Fabricator, when set to 1. Deactivates it, when set to 0.
|-
| Lock || Boolean || Locks the Fabricator, when set to 1. Unlocks it, when set to 0.
|-
| On || Boolean || Turns the Fabricator on, when set to 1. Turns it off, when set to 0.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Fabricator is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Fabricator is open. (0 for no, 1 for yes)
|-
| Error || Boolean || Returns whether the Fabricator is flashing an error. (0 for no, 1 for yes)
|-
| Activate || Boolean || Returns whether the Fabricator is active. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Fabricator is locked. (0 for no, 1 for yes)
|-
| Reagents || Float || The amount of reagent contents in the Fabricator in grams.
|-
| On || Boolean || Returns whether the Fabricator is turned on. (0 for no, 1 for yes)
|-
| ImportQuantity || (Unknown) || (Unknown)
|-
| ImportSlotOccupant || Boolean || Returns whether there is something in the import slot of the Fabricator. (0 for no, 1 for yes) (Only turns 1 briefly, when something is inserted in the Fabricator)
|-
| ExportQuantity || Integer || Returns the amount of items in the export slot of the Fabricator. The export slot also encompasses whatever is currently being fabricated in the Fabricator.
|-
| ExportSlotOccupant || Boolean || Returns whether the export slot of the Fabricator holds an item. The export slot also encompasses whatever is currently being fabricated in the Fabricator.
|-
| RequiredPower || Integer || The amount of power, currently needed by the Fabricator, in watts.
|}

== Bugs ==
* If the Fabricator is deconstructed while fabricating an item, the complete [''glowing!''] item will be left behind along with any other reagents in the Fabricator.
* If the Fabricator is opened while fabricating an item (paused and unpaused), it will not drop any reagents it holds.
</translate>

Kit (Sign)

2020-08-06T07:36:21Z

Chrisbitz:

{{Itembox
| name = Kit (Sign)
| image = [[File:ItemKitSign.png]]
| stacks = 10
| createdwith = [[Autolathe]]
| cost = 3g [[Iron_Ingot|Iron]]
}}

==Description==

Signs are placeable only on frames. Use the [[Labeller]] to add text to them.

{| class="wikitable"
|-
! Property !! Code
|-
| Bold|| Use and .
|-
| Italics|| Use and .
|-
| Underline|| Use < and .
|-
| Superscript|| Use and 
|-
| Subscript|| Use and 
|-
| Linefeed|| Use to force a linefeed.
|-
| Tab|| Use \t which will add one tab stop.
|-
| Position|| Use <pos=4.25> advances about 4.25 spaces.
|-
| Size||Use <size=36> to set point size to 36. <size=+18> to increase the point size by 18 points. 
<size=-14> to decrease the point size by 14 points. 
</size> to end the size tag. 
|-
| Color|| <color=red> to set the color to red. Several other colors are pre-defined. 
<#FF8000> or any other hexadecimal code to define a color. 
</color> to end the color tag. 
|}

Fenoxitone Powder

2020-08-04T00:38:44Z

Chrisbitz:

[[Category:Items]]
{{Itembox
| name = Fenoxitone Powder
| image = [[File:Fenoxitone Powder 00 0.1.1567.7381.png|thumb|A packet of Fenoxitone Powder.]]
| createdwith = [[Reagent Processor]]
| stacks = 100g
}}

== Description == 
*Made in amounts of 5g per [[Fern]] placed in the [[Reagent Processor]], up to 100g.
*It is advisable to make the largest batch you can, as you cannot merge them by hand, only with the [[Stacker]].

== Uses == 
*50g of Fenoxitone powder and 100ml of [[Soy Oil]] in the [[Chemistry Station]] yields a carton of [[Milk]].

Kit (Sign)

2020-07-30T07:19:21Z

Chrisbitz: formatting commands

{{Itembox
| name = Kit (Sign)
| image = [[File:ItemKitSign.png]]
| stacks = 10
| createdwith = [[Autolathe]]
| cost = 3g [[Iron_Ingot|Iron]]
}}

==Description==

Signs are placeable only on frames. Use the [[Labeller]] to add text to them.

{| class="wikitable"
|-
! Property !! Code
|-
| Bold|| Use and .
|-
| Italics|| Use and .
|-
| Underline|| Use and .
|-
| Superscript|| Use and 
|-
| Subscript|| Use and 
|-
| Linefeed|| Use \n to force a linefeed.
|-
| Tab|| Use \t which will add one tab stop.
|-
| Position|| Use <pos=4.25> advances about 4.25 spaces.
|-
| Size||Use <size=36> to set point size to 36. <size=+18> to increase the point size by 18 points. 
<size=-14> to decrease the point size by 14 points. 
</size> to end the size tag. 
|-
| Color|| <color=red> to set the color to red. Several other colors are pre-defined. 
<#FF8000> or any other hexadecimal code to define a color. 
</color> to end the color tag. 
|}

Kit (Sign)

2020-07-30T06:57:08Z

Chrisbitz: Undo revision 9573 by Chrisbitz (talk)

Kit (Sign)

2020-07-30T06:54:28Z

Chrisbitz: added formatting commands

{{Itembox
| name = Kit (Sign)
| image = [[File:ItemKitSign.png]]
| stacks = 10
| createdwith = [[Autolathe]]
| cost = 3g [[Iron_Ingot|Iron]]
}}

==Description==

Signs are placeable only on frames. Use the [[Labeller]] to add text to them.

these are the formatting commands:

Bold Use and .
Italics Use and .
Underline Use and .
Superscript Use and 
Subscript Use and 
Linefeed Use \n to force a linefeed.
Tab Use \t which will add one tab stop.
Position Use <pos=4.25> advances about 4.25 spaces.
Size Use <size=36> to set point size to 36.
<size=+18> to increase the point size by 18 points.
<size=-14> to decrease the point size by 14 points.
</size> to end the size tag.
Color <color=red> to set the color to red. Several other colors are pre-defined.
<#FF8000> or any other hexadecimal code to define a color.
</color> to end the color tag.

Circuitboard (Air Control)

2020-05-27T08:23:19Z

Chrisbitz:

<languages />
<translate>

{{Itembox
| name = Circuitboard (Air Control)
| image = [[File:{{#setmainimage:Circuitboard.png}}]]
| stacks = No
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Copper Ingot|Copper]], 5g [[Gold Ingot|Gold]]
}}

== Description == 
[[Circuitboard (Air Control)]] can be placed inside of a [[Console]] to form a Air Control Console. It is one of many [[Circuitboard|Circuitboards]] that can be fitted to a Console.

It appears to be not fully implemented in the code, as "Panic Pressurise" and "Panic Depressurise" don't work.

== Air Control == 
The Air Control circuitboard in a console can be used to control [[Active Vent|active vents]] and display information about the environment.

== Setup == 
Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].

The setup mode has three options: Pressure, Draught, and Offline. For basic functionality, at least one [[Gas Sensor]] and [[Active Vent]] should be selected on the setup screen.

== Operation == 

Pressure mode will automatically try to maintain pressure at 100kPa, toggling the active vent between inward and outward as needed and turning off when the target pressure is reached.

Draught mode tries to maintain pressure at 100kpa but doesn't turn off when the target pressure is reached. The vent will internally toggle between inward and outward airflow to continiously circulate gas between the pipe and room.

Offline disables the active vent.

<gallery>
Console Air control.jpg
Console Air control setup.jpg
Composite Air disabled.jpg
</gallery>
</translate>

Circuitboard (Air Control)

2020-05-27T08:22:05Z

Chrisbitz: Added bit about Panic Pressurise not working

<languages />
<translate>

{{Itembox
| name = Circuitboard (Air Control)
| image = [[File:{{#setmainimage:Circuitboard.png}}]]
| stacks = No
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Copper Ingot|Copper]], 5g [[Gold Ingot|Gold]]
}}

== Description == 
[[Circuitboard (Air Control)]] can be placed inside of a [[Console]] to form a Air Control Console. It is one of many [[Circuitboard|Circuitboards]] that can be fitted to a Console.
It appears to be not fully implemented in the code, as "Panic Pressurise" and "Panic Depressurise" don't work.

== Air Control == 
The Air Control circuitboard in a console can be used to control [[Active Vent|active vents]] and display information about the environment.

== Setup == 
Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].

The setup mode has three options: Pressure, Draught, and Offline. For basic functionality, at least one [[Gas Sensor]] and [[Active Vent]] should be selected on the setup screen.

== Operation == 

Pressure mode will automatically try to maintain pressure at 100kPa, toggling the active vent between inward and outward as needed and turning off when the target pressure is reached.

Draught mode tries to maintain pressure at 100kpa but doesn't turn off when the target pressure is reached. The vent will internally toggle between inward and outward airflow to continiously circulate gas between the pipe and room.

Offline disables the active vent.

<gallery>
Console Air control.jpg
Console Air control setup.jpg
Composite Air disabled.jpg
</gallery>
</translate>

Gas Generator

2019-06-16T10:47:16Z

Chrisbitz: Added C Conversions to temps

See also: [[Kit (Gas Generator)]]
== Description == 
This Generator requires a supply of mixed gases ([[Hydrogen]] / [[Oxygen]]) in order to work.
It produces 24KW per tick per Kpa of supplied pressure with a 64/36 (H/O2) mix, or 38.3KW with a welder fueltank. It is highly suggested that you use a pressure regulator on the input. (Max observed output of 420KW per tick has been observed, this also burned out multiple cables of both types.)

== Update 0.1.1510.7155 ==
The "Gas Generator" now needs an [[Atmosphere]] surrounding it:
Pressure: 20 kPA
Min temperature: 278 K (5C)
Max temperature: 328 K (55C)

== Suggestions ==
*Suggested use
**early game - Overnight/emergency station battery recharging. - OUTDATED: Atmospheric needs prevents easy usage!
**late game - Can be used in place of all solar as long as sufficient Battery reserves and atmospheric systems are in place.
*the generator produces much heat in it's surrounding, so cool it down
*to auto-restart the generator you could use the [[always-on-circuit]]

Logic I/O

2019-06-15T13:43:54Z

Chrisbitz: /* Batch Reader */

[[Category:Circuits]]
{{Structurebox
| name = Logic Reader
| image = [[File:LogicReader.jpg]]
| power_usage = 10W
| placed_with_item = [[Kit (Logic I/O)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
}}
{{Structurebox
| name = Logic Writer
| image = [[File:LogicWriter.jpg]]
| power_usage = 10W
| placed_with_item = [[Kit (Logic I/O)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
}}
{{Structurebox
| name = Batch Writer
| image = [[File:BatchWriter.jpg]]
| power_usage = 10W
| placed_with_item = [[Kit (Logic I/O)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
}}
{{Structurebox
| name = Logic Mirror
| image = [[File:LogicMirror.jpg]]
| power_usage = 10W
| placed_with_item = [[Kit (Logic I/O)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
}}
{{Structurebox
| name = Slot Reader
| image = [[File:SlotReader.jpg]]
| power_usage = 10W
| placed_with_item = [[Kit (Logic I/O)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
}}
{{Structurebox
| name = Batch Reader
| image = [[File:BatchReader.jpg]]
| power_usage = 10W
| placed_with_item = [[Kit (Logic I/O)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
}}

The Logic Input/Output Unit is used to '''Read''' (input) data from any machine with a data port connected through the data network, or '''Write''' (output) data to any machine with a data port connected to trough the data network. The Input, Output and Power networks can be completely separated.

== Logic Reader ==

=== Connectors ===

* Left: Data Input
* Top: Power Input (10w)
* Right: Data Output

=== Screws ===

* Left: Input Selector. Click with [[Screwdriver]] to select from which machine to read from. Only machines with a data port connected though the cables connected to the left port can be read from.
* Right: Variable Selector: Click to select what Variable to output into the network on the right. Different machines will have different available variables to read from.

== Logic Writer ==

=== Connectors ===

* Left: Data Input
* Top: Power Input (10w)
* Right: Data Output

=== Screws ===

* Bottom Left: Variable Input Selector: Click with [[Screwdriver]] to select the value to input. This can be directly from a machine, another logic circuit, a computer, etc.
* Top Right: Machine Write Selector. Click to select what machine to write to. Only machines with a data port connected though the cables connected to the right port can be written to.
* Bottom Right: Variable Selector: Click to select what variable to write to the machine. The value written will be what is captured by the Variable Input Selector.

== Batch Writer ==

The Batch Writer writes to all conected devices of a device type.
For example: One can control all digital valves connected in its network with a single Batch Writer.

=== Connectors ===

* Left: Data Input
* Top: Power Input (10w)
* Right: Data Output

=== Screws ===

* Bottom Left: Variable Input Selector: Click with [[Screwdriver]] to select the value to input. This can be directly from a machine, another logic circuit, a computer, etc.
* Top Right: Machine Type Selector. Click to select what machine type to write to. All machines of that type will recieve the exact same data. For example selecting ''Solar Panel'' will write to all solar panels on the network.
* Bottom Right: Variable Selector: Click to select what variable to write to the machines. The value written will be what is captured by the Variable Input Selector.

== Logic Mirror ==

=== Connectors ===

* Left: Mirrored Device
* Top: Power Input (10w)
* Right: Data Input/Output

=== Screws ===

* Centre: Variable Mirroring Selector: Click with [[Screwdriver]] to select the device to mirror. This can be any machine, logic circuit, computer, etc.

== Slot Reader ==

=== Connectors ===

* Left: Data Input
* Top: Power Input (10w)
* Right: Data Output

=== Screws ===

* Left: Variable Input Selector: Click with [[Screwdriver]] to select the value to input. This can be from any device that has inventory slots, etc.
* Centre: Slot Selector: Click to Select which slot to read from.
* Right: Variable Selector: Click to select what variable to output into the network on the right.

== Batch Reader ==

The Batch Reader is sort of the opposite of a Batch Writer - It can read from all connected devices of a device type. 
For example: One can read from all [[Kit (Battery)]] and then average or sum the capacities, and output the value to another device.

=== Connectors ===

* Left: Data Input
* Top: Power Input (10w)
* Right: Data Output

=== Screws ===

* Bottom Left: Variable Input Selector: Click with [[Screwdriver]] to select from which machine type to read from.
* Top Right: Method Selector. Click to select by which method to pull data.
* Bottom Right: Variable Selector: Click to select what variable to output into the network on the right.

Pipe Gas Mixer

2019-06-02T12:37:33Z

Chrisbitz:

Pipe Gas Mixer

2019-06-02T12:36:21Z

Chrisbitz: added input 1 and 2 description

<languages />
<translate>

{{Itembox
| name = Pipe Gas Mixer
| image = [[File:ItemPipeGasMixer.png]]
| stacks = 1
| createdwith = [[Hydraulic Pipe Bender]], [[Fabricator]]
| cost = 2g [[Iron]], 2g [[Gold]], 2g [[Copper]]
}}

== Description == 
Used to mix two gasses in proportions ranging from 0-100%. A must have for the [[Furnace]]
Input 1 is the straight thorough route, and Input 2 is the side entry.

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Lock || Boolean ||
|-
| Setting || float || Correspond to the percentage value of the Input 1
|-
| On || Boolean ||
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean ||
|-
| Error || Boolean ||
|-
| Lock || Boolean ||
|-
| Setting || float || Contains the current Input 1 value in percent (60.5 for example)
|-
| Maximum || float || Value of 100
|-
| Ratio || Float || Contains the ratio corresponding to the Input 1 value (0.605, for the 60.5 value above)
|-
| On || Boolean ||
|-
| Requiredpower || Integer || In Watts. The Gas Mixer require 100W of power to function
|-
|}

</translate>