Stationeers Community Wiki - User contributions [en]

Portable Liquid Tank

2025-11-03T11:34:47Z

DaveGrylls: updated recepie

[[Category:Atmospherics]]
{{Itembox
| name = Portable Liquid Tank
| image =
| volume = 790 L
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 20g [[Iron]]
| maxpressure = 10.132 MPa
}}

==Description==
The **Portable Liquid Tank** is a portable tank for liquids, which is available early game. The [[Portable Liquid Tank Mk II]] improves on it by including insulation and a higher maximum pressure.
Like the [[Portable Gas Tank]] and [[Gas Tank Mk II]], it can be connected to a pipe network via a [[Portables Connector]].
It has a higher volume than the [[Liquid Canister]] or [[Liquid Canister (Smart)]], but cannot be carried in an inventory unless emptied and disassembled. It can, however, be lifted and dragged around the world similarly to a [[Kit (Crate)|Crate]].

The maximum pressure for the Portable Liquid Tank is 10.132 MPa, or 100 atmospheres, half that of the [[Portable Liquid Tank Mk II]]. Overpressurizing the tank will cause it to explode. Once the maximum pressure is reached, the tank starts taking damage until it bursts. This allows the Portable Liquid Tank to exceed the pressure rating temporarily.

==Usage==
The Portable Liquid Tank can be connected/disconnected to pipe networks using a [[Portables Connector]], by placing the tank on the connector and then interacting with it using a [[Wrench]]. It can also be connected (and disconnected) to the [[Rover]] and [[Lander]]

The front of the tank features a striped area where a [[Liquid Canister]] or [[Liquid Canister (Smart)]] can be inserted for refilling (equalizing the pressure in both canisters). There is also a variable flow rate valve on the top of the tank that can be used to vent the tank to the atmosphere (or into a sealed room). Note that this valve does not need to be opened when connected to a Tank Connector, but the setting of the valve remains persistent between connection and disconnection.

When connecting an empty Portable Liquid tank to an existing pipe network occupied with liquids, you should be aware that this may cause a sudden drop in pressure in your pipes, leading to your liquids boiling and rapidly reducing the latent heat, possibly to the point of your liquids freezing and rupturing pipes. Either ensure you have a significant volume in your pipes so that the pressure change is negligible, or pre-pressurize your liquid tank.

Portable Liquid Tank

2025-11-03T11:33:12Z

DaveGrylls: Created a page for the Portable Liquid tank, based off of the Portable Gas tank.

[[Category:Atmospherics]]
{{Itembox
| name = Portable Liquid Tank
| image =
| volume = 790 L
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 20g [[Iron]], 5g [[Copper]], 15g [[Steel]], 5g [[Silicon]]
| maxpressure = 10.132 MPa
}}

==Description==
The **Portable Liquid Tank** is a portable tank for liquids, which is available early game. The [[Portable Liquid Tank Mk II]] improves on it by including insulation and a higher maximum pressure.
Like the [[Portable Gas Tank]] and [[Gas Tank Mk II]], it can be connected to a pipe network via a [[Portables Connector]].
It has a higher volume than the [[Liquid Canister]] or [[Liquid Canister (Smart)]], but cannot be carried in an inventory unless emptied and disassembled. It can, however, be lifted and dragged around the world similarly to a [[Kit (Crate)|Crate]].

The maximum pressure for the Portable Liquid Tank is 10.132 MPa, or 100 atmospheres, half that of the [[Portable Liquid Tank Mk II]]. Overpressurizing the tank will cause it to explode. Once the maximum pressure is reached, the tank starts taking damage until it bursts. This allows the Portable Liquid Tank to exceed the pressure rating temporarily.

==Usage==
The Portable Liquid Tank can be connected/disconnected to pipe networks using a [[Portables Connector]], by placing the tank on the connector and then interacting with it using a [[Wrench]]. It can also be connected (and disconnected) to the [[Rover]] and [[Lander]]

The front of the tank features a striped area where a [[Liquid Canister]] or [[Liquid Canister (Smart)]] can be inserted for refilling (equalizing the pressure in both canisters). There is also a variable flow rate valve on the top of the tank that can be used to vent the tank to the atmosphere (or into a sealed room). Note that this valve does not need to be opened when connected to a Tank Connector, but the setting of the valve remains persistent between connection and disconnection.

When connecting an empty Portable Liquid tank to an existing pipe network occupied with liquids, you should be aware that this may cause a sudden drop in pressure in your pipes, leading to your liquids boiling and rapidly reducing the latent heat, possibly to the point of your liquids freezing and rupturing pipes. Either ensure you have a significant volume in your pipes so that the pressure change is negligible, or pre-pressurize your liquid tank.

Gas Tank Mk II

2025-11-03T11:03:05Z

DaveGrylls: forgot to also include that it can be moved around.

[[Category:Atmospherics]]
{{Itembox
| name = Gas Tank MK II
| image = [[File:DynamicGasTankAdvanced.png]]
| volume = 790 L
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 20g [[Iron]], 5g [[Copper]], 15g [[Steel]], 5g [[Silicon]]
| maxpressure = 20265 kPa
}}

==Description==
The Gas Tank Mk II (Formerly named: Portable Tank Advanced) is an improved version of the [[Portable Gas Tank]], featuring insulation and twice the maximum pressure.
Like the [[Portable Liquid Tank]] and [[Portable Liquid Tank Mk II]], it can be connected to a pipe network via a [[Portables Connector]].
It has a higher volume than the Gas [[Canister]] or [[Gas Canister (Smart)]], but cannot be carried in an inventory unless emptied and disassembled. It can, however, be lifted and dragged around the world similarly to a [[Kit (Crate)|Crates]].

The maximum pressure for the Gas Tank Mk II is 20.265 MPa, or 200 atmospheres, double that of the [[Portable Gas Tank]]. Overpressurizing the tank will cause it to explode. Once the maximum pressure is reached, the tank starts taking damage until it bursts. This allows the [[Gas Tank MK II]] to exceed the pressure rating temporarily.

==Usage==
The [[Gas Tank MK II]] can be connected/disconnected to pipe networks using a [[Portables Connector]], by placing the tank on the connector and then interacting with it using a [[Wrench]]. It can also be connected (and disconnected) to the [[Rover]] and [[Lander]]

The front of the tank features a striped area where a Gas [[Canister]] or [[Gas Canister (Smart)]] can be inserted for refilling (equalizing the pressure in both canisters). There is also a variable flow rate valve on the top of the tank that can be used to vent the tank to the atmosphere (or into a sealed room). Note that this valve does not need to be opened when connected to a Tank Connector, but the setting of the valve remains persistent between connection and disconnection.

==Notes==
The visual bar will remain grey until 10.132 MPa, then the bar will begin to fill until once past 20.265 MPa the display will begin to blink red and damage to the tank occurs.

* Default colour marking in Stationeers:
{| class=wikitable
! [[Spray Paint|Blue]]
| [[Water|H2O]] (Water)
|-
! [[Spray Paint|Green]]
| [[Nitrogen|N2]] (Nitrogen) [[Nitrous Oxide|N2O]] (Nitrous Oxide)
|-
! [[Spray Paint|Grey]]
| [[Carbon Dioxide|CO2]] (Carbon Dioxide) [[Pollutant|X]] (Poluttant)
|-
! [[Spray Paint|Orange]]
| [[Fuel]] (H2 66% + O2 34%)
|-
! [[Spray Paint|Red]]
| [[Volatiles|H2]] (Hydrogen / Volitiles)
|-
! [[Spray Paint|White]]
| [[Oxygen|O2]] (Oxygen) [[Air]] (as defined in-game as O2 25% + N2 75%)
|-
! [[Spray Paint|Yellow]]
| Stock colour after manufacturing (Empty)
|}

* Other common (player) colour markings in Stationeers:
{| class=wikitable
! [[Spray Paint|Black]]
| [[Pollutant|X]] (Pollutant, replacing Grey)
|-
! [[Spray Paint|Khaki]]
| [[Air]] (as defined in-game as O2 25% + N2 75%, replacing White) [[Air 20/80]] (Earth Standard, less 1% Argon) [[Nitrox 35/65]] (alternate breathable mixture)
|-
! [[Spray Paint|Pink]]
| Hydroponic Air (any breatahable mix with also including >2% [[Carbon Dioxide|CO2]])
|-
! [[Spray Paint|Purple]]
| Exhaust Gas (any High Pressure / Temperature mix including [[Pollutant|X]] and [[Carbon Dioxide|CO2]])
|-
! [[Spray Paint|Brown]]
| Body-specific Atmospheric Gas
|-
! [[Spray Paint|Yellow]]
| Waste / Exhaled Gas (per default Waste Canister)
|}

* Note that Stationeers Gas Standards vary compared to those used on Earth, as listed on Wikipedia: https://en.wikipedia.org/wiki/Bottled_gas#Specific_gases

Gas Tank Mk II

2025-11-03T10:51:54Z

DaveGrylls: Improved the description to also include a link to the Portable Gas Tank, also mentioning in the description the Portables Connector, and a breif reference to the portable liquid tanks, which don't yet seem to have articles

[[Category:Atmospherics]]
{{Itembox
| name = Gas Tank MK II
| image = [[File:DynamicGasTankAdvanced.png]]
| volume = 790 L
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 20g [[Iron]], 5g [[Copper]], 15g [[Steel]], 5g [[Silicon]]
| maxpressure = 20265 kPa
}}

==Description==
The Gas Tank Mk II (Formerly named: Portable Tank Advanced) is a portable container used to store gases. Similar to the [[Portable Gas Tank]], [[Portable Liquid Tank]] and [[Portable Liquid Tank Mk II]], it can be connected to a pipe network via a [[Portables Connector]].
It has a higher volume than the Gas [[Canister]] or [[Gas Canister (Smart)]].

The maximum pressure for the Gas Tank Mk II is 20.265 MPa, or 200 atmospheres, double that of the [[Portable Gas Tank]]. Overpressurizing the tank will cause it to explode. Once the maximum pressure is reached, the tank starts taking damage until it bursts. This allows the [[Gas Tank MK II]] to exceed the pressure rating temporarily.

==Usage==
The [[Gas Tank MK II]] can be connected/disconnected to pipe networks using a [[Portables Connector]], by placing the tank on the connector and then interacting with it using a [[Wrench]]. It can also be connected (and disconnected) to the [[Rover]] and [[Lander]]

The front of the tank features a striped area where a Gas [[Canister]] or [[Gas Canister (Smart)]] can be inserted for refilling (equalizing the pressure in both canisters). There is also a variable flow rate valve on the top of the tank that can be used to vent the tank to the atmosphere (or into a sealed room). Note that this valve does not need to be opened when connected to a Tank Connector, but the setting of the valve remains persistent between connection and disconnection.

==Notes==
The visual bar will remain grey until 10.132 MPa, then the bar will begin to fill until once past 20.265 MPa the display will begin to blink red and damage to the tank occurs.

* Default colour marking in Stationeers:
{| class=wikitable
! [[Spray Paint|Blue]]
| [[Water|H2O]] (Water)
|-
! [[Spray Paint|Green]]
| [[Nitrogen|N2]] (Nitrogen) [[Nitrous Oxide|N2O]] (Nitrous Oxide)
|-
! [[Spray Paint|Grey]]
| [[Carbon Dioxide|CO2]] (Carbon Dioxide) [[Pollutant|X]] (Poluttant)
|-
! [[Spray Paint|Orange]]
| [[Fuel]] (H2 66% + O2 34%)
|-
! [[Spray Paint|Red]]
| [[Volatiles|H2]] (Hydrogen / Volitiles)
|-
! [[Spray Paint|White]]
| [[Oxygen|O2]] (Oxygen) [[Air]] (as defined in-game as O2 25% + N2 75%)
|-
! [[Spray Paint|Yellow]]
| Stock colour after manufacturing (Empty)
|}

* Other common (player) colour markings in Stationeers:
{| class=wikitable
! [[Spray Paint|Black]]
| [[Pollutant|X]] (Pollutant, replacing Grey)
|-
! [[Spray Paint|Khaki]]
| [[Air]] (as defined in-game as O2 25% + N2 75%, replacing White) [[Air 20/80]] (Earth Standard, less 1% Argon) [[Nitrox 35/65]] (alternate breathable mixture)
|-
! [[Spray Paint|Pink]]
| Hydroponic Air (any breatahable mix with also including >2% [[Carbon Dioxide|CO2]])
|-
! [[Spray Paint|Purple]]
| Exhaust Gas (any High Pressure / Temperature mix including [[Pollutant|X]] and [[Carbon Dioxide|CO2]])
|-
! [[Spray Paint|Brown]]
| Body-specific Atmospheric Gas
|-
! [[Spray Paint|Yellow]]
| Waste / Exhaled Gas (per default Waste Canister)
|}

* Note that Stationeers Gas Standards vary compared to those used on Earth, as listed on Wikipedia: https://en.wikipedia.org/wiki/Bottled_gas#Specific_gases

Gas Tank MKII

2025-11-03T10:36:37Z

DaveGrylls: DaveGrylls moved page Gas Tank MKII to Gas Tank Mk II: Corrected Name

#REDIRECT [[Gas Tank Mk II]]

Gas Tank Mk II

2025-11-03T10:36:37Z

DaveGrylls: DaveGrylls moved page Gas Tank MKII to Gas Tank Mk II: Corrected Name

[[Category:Atmospherics]]
{{Itembox
| name = Gas Tank MK II
| image = [[File:DynamicGasTankAdvanced.png]]
| volume = 790(?) L
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 20g [[Iron]], 5g [[Copper]], 15g [[Steel]], 5g [[Silicon]]
| maxpressure = 20265 kPa
}}

==Description==
The [[Gas Tank MK II]] (Formerly named: Portable Tank Advanced) is used to store gasses. It has a higher volume than the Gas [[Canister]] or [[Gas Canister (Smart)]].

The maximum pressure for the tank is 20.265 MPa, or 200 atmospheres. Over pressurizing the tank will cause it to explode. Once the maximum pressure is reached the tank starts taking damage until it bursts. This allows the [[Gas Tank MK II]] to exceed the pressure rating temporarily.

==Usage==
The [[Gas Tank MK II]] can be connected/disconnected to pipe networks using a [[Tank Connector]], by placing the tank on the connector and then interacting with it using a [[Wrench]]. It can also be connected (and disconnected) to the [[Rover]] and [[Lander]]

The front of the tank features a striped area where a Gas [[Canister]] or [[Gas Canister (Smart)]] can be inserted for refilling (equalizing the pressure in both canisters). There is also a variable flow rate valve on the top of the tank that can be used to vent the tank to atmosphere (or into a sealed room). Note that this valve does not need to be opened when connected to a Tank Connector, but the setting of the valve remains persistent between connection and disconnection.

==Notes==
The visual bar will remain grey until 10.132 MPa, then the bar will begin to fill until once past 20.265 MPa the display will begin to blink red and damage to the tank occurs.

* Default colour marking in Stationeers:
{| class=wikitable
! [[Spray Paint|Blue]]
| [[Water|H2O]] (Water)
|-
! [[Spray Paint|Green]]
| [[Nitrogen|N2]] (Nitrogen) [[Nitrous Oxide|N2O]] (Nitrous Oxide)
|-
! [[Spray Paint|Grey]]
| [[Carbon Dioxide|CO2]] (Carbon Dioxide) [[Pollutant|X]] (Poluttant)
|-
! [[Spray Paint|Orange]]
| [[Fuel]] (H2 66% + O2 34%)
|-
! [[Spray Paint|Red]]
| [[Volatiles|H2]] (Hydrogen / Volitiles)
|-
! [[Spray Paint|White]]
| [[Oxygen|O2]] (Oxygen) [[Air]] (as defined in-game as O2 25% + N2 75%)
|-
! [[Spray Paint|Yellow]]
| Stock colour after manufacturing (Empty)
|}

* Other common (player) colour markings in Stationeers:
{| class=wikitable
! [[Spray Paint|Black]]
| [[Pollutant|X]] (Pollutant, replacing Grey)
|-
! [[Spray Paint|Khaki]]
| [[Air]] (as defined in-game as O2 25% + N2 75%, replacing White) [[Air 20/80]] (Earth Standard, less 1% Argon) [[Nitrox 35/65]] (alternate breathable mixture)
|-
! [[Spray Paint|Pink]]
| Hydroponic Air (any breatahable mix with also including >2% [[Carbon Dioxide|CO2]])
|-
! [[Spray Paint|Purple]]
| Exhaust Gas (any High Pressure / Temperature mix including [[Pollutant|X]] and [[Carbon Dioxide|CO2]])
|-
! [[Spray Paint|Brown]]
| Body-specific Atmospheric Gas
|-
! [[Spray Paint|Yellow]]
| Waste / Exhaled Gas (per default Waste Canister)
|}

* Note that Stationeers Gas Standards vary compared to those used on Earth, as listed on Wikipedia: https://en.wikipedia.org/wiki/Bottled_gas#Specific_gases