Atmospherics

2018-09-30T02:47:21Z

Dimencia: Added example pic of using an A/C

[[Category:Atmospherics]]
{{Itembox
| name = Kit (Atmospherics)
| image = [[File:ItemKitAtmospherics.png]]
| createdwith = [[Hydraulic Pipe Bender]], [[Fabricator]]
| cost = 10g [[Iron]], 5g [[Gold]], 20g [[Copper]]
| stacks = no
}}
=Air Conditioner Unit=
{{Structurebox
| name = Air Conditioner
| image = [[File:Atmospherics front.jpg]]
| power_usage = Up to 2000W based on temperature difference
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Atmospherics)]]
}}
==Description==
Used to lower and raise the temperature fed through it from the input pipe. 
It has a range from -99 to 99 Celsius for the output

If the coolant pipe does not have 100kpa pressure it will divert output to coolant waste port to fill its coolant pipe

==Usage==
Place the Kit (Atmospherics) and run some pipes to the place you want to vent the heat. Place a few [[Pipe Radiator]]s on the pipe, fill it with whatever gas mixture you want. 
Make a return loop on the coolant system back to the coolant waste port for a slightly better efficiency. 
It will try to draw or expel heat to the coolant mix to make the input match the desired output. See the diagram for an example 
[[File:Coolant Example.png|frameless|Example A/C Setup]]
 
{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Open || Boolean || Starts the Air Conditioner Unit, when set to 1. Stops it, when set to 0. (This seems to work only with Batch Writer and not with Logic Writer - tested on game ver: v0.1.1362.6552).
|-
| Mode || Integer || (Unknown) (Judging by the "Mode" output, it accepts values in the range 0-2.)
|-
| Lock || Boolean || Locks the Air Conditioner Unit, when set to 1. Unlocks it, when set to 0.
|-
| On || Boolean || Turns the Air Conditioner Unit on, when set to 1. Turns it off, when set to 0.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Air Conditioner Unit is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Air Conditioner Unit is running. (0 for no, 1 for yes)
|-
| Mode || Integer || (Unknown) (Returns output in the range 0-2, equivalent to the input of the "Mode" parameter.)
|-
| Error || Boolean || Returns whether the Air Conditioner Unit is flashing an error. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Air Conditioner Unit is locked. (0 for no, 1 for yes)
|-
| On || Boolean || Returns whether the Air Conditioner Unit is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power, required by the Air Conditioner, in Watts.
|}

=Filtration=
{{Structurebox
| name = Filtration
| power_usage = Minimum of 5W but expect up to 6000W
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Atmospherics)]]
}}
==Description==
Used to filter out specific gasses and fluids from a mixture. 
it can filter out up to 2 things at once

==Usage==
Place the Kit (Atmospherics) and change the variant to Filtration. 
Place [[filter]]s in the machine for what you want to filter out. 
There are three filtration pipe connections. 
Filtration Input is where you connect the incoming atmosphere to be passed through the Filtration Atmospherics. 
Filtration Waste is the remaining mix after extracting whatever the filters did. 
Filtration Output is the filtered material for which you placed filters in the machine for.

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Turns the Filtration Unit on, when set to 1. Turns it off, when set to 0.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Filtration Unit is turned on and receives power. (0 for no, 1 for yes)
|-
| Error || Boolean || Returns whether the Filtration Unit is flashing an error. (0 for no, 1 for yes)
|-
| On || Boolean || Returns whether the Filtration Unit is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power, required by the Filtration Unit, in Watts.
|}

=Electrolyzer=
{{Structurebox
| name = Electrolyzer
| image = [[File:Electrolyzer front.png]]
| power_usage = 1200W
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Atmospherics)]]
}}
==Description==
Used to separate water (H2O) into H2 and O2 in a 2 to 1 ratio (perfect fuel). 

==Usage==
Place the Kit (Atmospherics) and change the variant to Electrolyzer. 
There are two pipe connections. 
Electrolyzer Input is where you connect the incoming water. 
Electrolyzer Output is where the H2 and O2 comes out mixed together.

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Lock || Boolean || Locks the Electrolyzer , when set to 1. Unlocks it, when set to 0.
|-
| On || Boolean || Turns the Electrolyzer on, when set to 1. Turns it off, when set to 0.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Electrolyzer is turned on and receives power. (0 for no, 1 for yes)
|-
| Error || Boolean || Returns whether the Electrolyzer is flashing an error. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Electrolyzer is locked. (0 for no, 1 for yes)
|-
| On || Boolean || Returns whether the Electrolyzer is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power, required by the Electrolyzer, in Watts.
|}

File:Coolant Example.png

2018-09-30T02:40:44Z

Dimencia:

Credit @Wallross#7269, Discord
An example of how to set up the coolant network for an A/C unit

Stationeers Community Wiki - User contributions [en]

Atmospherics

File:Coolant Example.png