Stationeers Community Wiki - User contributions [en]

Logic Monostable Multivibrator

2018-01-06T04:09:49Z

Grilled salmon: /* A pulse extender circuit */

[[Category:Tutorials]]
<languages />
<translate>
= Monostable Multivibrator Circuit (Pulse Length Extender) =
'''Author(s):''' illiux#5291, grilled_salmon#1537 
'''Stationeers Version:''' 0.1.1094.5526 
'''Number of Components:''' 8

This circuit provides a way to extend an input pulse by a set amount of ticks. "Button (Trigger)" will set the starting input of "Math (A + B)" to a value stored in "Memory (OnTicks)" when pressed, and the "Math (A + B)" will decrement itself until it is less than zero. The "Compare (Math > 0)" is used as both the output and the control for the "Math (A + B)" to prevent it from counting down forever. NOTE: the input signal must be a pulse. Holding the signal will hold the output as well, regardless of tick setting. Adding edge-triggering between the input and the select will work if you need an edge triggered device.

== Design ==
* 2 [[Kit (Logic Processor)]] (Variant: Logic Select)
* 1 [[Kit (Logic Processor)]] (Variant: Logic Compare)
* 1 [[Kit (Logic Processor)]] (Variant: Logic Math)
* 3 [[Kit (Logic Memory)]]
* 1 [[Kit (Switch)]] (Variant: Button)

[[File:MonostableMultivibrator.png]]

== Notes ==

* Can extend an input pulse by a set amount of ticks (half-seconds), stored in "Memory (OnTicks)." Receiving another pulse during the countdown phase will reset the output signal timer.

</translate>

Logic Monostable Multivibrator

2018-01-06T04:08:05Z

Grilled salmon: /* Pulse Former using Logic Gates */

[[Category:Tutorials]]
<languages />
<translate>
= Pulse Former using Logic Gates =
'''Author(s):''' illiux#5291, grilled_salmon#1537 
'''Stationeers Version:''' 0.1.1094.5526 
'''Number of Components:''' 8

This circuit provides a way to extend an input pulse by a set amount of ticks. "Button (Trigger)" will set the starting input of "Math (A + B)" to a value stored in "Memory (OnTicks)" when pressed, and the "Math (A + B)" will decrement itself until it is less than zero. The "Compare (Math > 0)" is used as both the output and the control for the "Math (A + B)" to prevent it from counting down forever. NOTE: the input signal must be a pulse. Holding the signal will hold the output as well, regardless of tick setting. Adding edge-triggering between the input and the select will work if you need an edge triggered device.

== Design ==
* 2 [[Kit (Logic Processor)]] (Variant: Logic Select)
* 1 [[Kit (Logic Processor)]] (Variant: Logic Compare)
* 1 [[Kit (Logic Processor)]] (Variant: Logic Math)
* 3 [[Kit (Logic Memory)]]
* 1 [[Kit (Switch)]] (Variant: Button)

[[File:MonostableMultivibrator.png]]

== Notes ==

* Can extend an input pulse by a set amount of ticks (half-seconds), stored in "Memory (OnTicks)." Receiving another pulse during the countdown phase will reset the output signal timer.

</translate>

Logic Monostable Multivibrator

2018-01-06T04:07:03Z

Grilled salmon: Created page with "Category:Tutorials <languages /> <translate> = Pulse Former using Logic Gates = '''Author(s):''' illiux#5291, grilled_salmon#1537 '''Stationeers Version:''' 0.1.1094.5..."

[[Category:Tutorials]]
<languages />
<translate>
= Pulse Former using Logic Gates =
'''Author(s):''' illiux#5291, grilled_salmon#1537 
'''Stationeers Version:''' 0.1.1094.5526 
'''Number of Components:''' 8

This circuit provides a way to extend an input pulse by a set amount of ticks. "Button (Trigger)" will set the math unit to a set tick value when pressed, and the "Math (A + B)" will decrement itself until it is less than zero. The "Compare (Math > 0)" is used as both the output and the control for the "Math (A + B)" to prevent it from counting down forever. NOTE: the input signal must be a pulse. Holding the signal will hold the output as well, regardless of tick setting. Adding edge-triggering between the input and the select will work if you need an edge triggered device.

== Design ==
* 2 [[Kit (Logic Processor)]] (Variant: Logic Select)
* 1 [[Kit (Logic Processor)]] (Variant: Logic Compare)
* 1 [[Kit (Logic Processor)]] (Variant: Logic Math)
* 3 [[Kit (Logic Memory)]]
* 1 [[Kit (Switch)]] (Variant: Button)

[[File:MonostableMultivibrator.png]]

== Notes ==

* Can extend an input pulse by a set amount of ticks (half-seconds), stored in "Memory (OnTicks)." Receiving another pulse during the countdown phase will reset the output signal timer.

</translate>

File:MonostableMultivibrator.png

2018-01-06T04:00:05Z

Grilled salmon:

A circuit that functions as a monostable multivibrator.