Stationeers Community Wiki - User contributions [en]

Filter

2024-06-18T10:21:06Z

Kaedys: /* Tips */ Zrillians breathe volatiles, not hydrogen (which isn't a thing currently, and isn't what volatiles are even once it becomes a thing, according to patch notes)

<languages />
<translate>
[[Category:Atmospherics]][[Category:Gas]]
{{Itembox
| name = Filter (''gas'')
| image = [[File:ItemGasFilterOxygen.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Iron]]
| stacks = no
}}
{{Itembox
| name = Medium Filter (''gas'')
| image = [[File:ItemGasFilterOxygenM.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Iron]], 5g [[Silver]], 1g [[Constantan]]
| stacks = no
}}
{{Itembox
| name = Heavy Filter (''gas'')
| image = [[File:ItemGasFilterOxygenL.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Steel]], 1g [[Invar]], 1g [[Stellite]]
| stacks = no
}}

Filters are used to filter out gas from an input. Only gasses matching the filters type will pass through it.

All filters of the same size cost the same regardless of type and can be made in the [[Hydraulic Pipe Bender]].

== Filter Size ==

* Small filter lasts 2 hours. 
* Medium filter lasts 10 hours. 
* Large filter lasts 40 hours. 
* Catalytic Filter lasts an unlimited amount of time, but are only available in creative mode.
* The duration is counted as the number of ticks the filter is being used, and only counts ticks in which the filter removed the targeted gas from the input volume. If none of the target gas is present in the input volume, the filter will not count as being used and will not degrade.

== Filter Types ==
* [[Carbon Dioxide|CO2]]
* [[Nitrogen]]
* [[Nitrous Oxide]]
* [[Oxygen]]
* [[Pollutant]]
* [[Volatiles]]
* [[Water]]

== Tips ==

# Players start the game with three filters, three [[Carbon Dioxide|CO2]] filters in the suit.
# Players breathe out [[Carbon Dioxide|CO2]] (just like in real life) and this may need to be considered when setting up a pressurized atmosphere where a helmet will not be worn.
## Note that unlike real life, where concentrations of CO2 as low as 7-10% can cause asphyxiation, CO2 in Stationeers is entirely safe. Players can comfortably breathe even very large ratios of CO2, as long as sufficient partial pressure of oxygen (specifically, 16 kPa) is also present.
# [[Arc Furnace|Arc Furnaces]] and [[Furnace|Furnaces]] produce waste products like pollutants or [[Carbon Dioxide|CO2]] which will need to be scrubbed out of a pressurized base (assuming the [[Furnace]] is not already hooked up to a [[Pipe]] system)
# If you're choosing to play as a [[Zrilian]] you will instead have 3 [[Nitrous Oxide]] filters instead of 3 [[Carbon Dioxide|CO2]] filters as they breath in [[Volatiles]] and exhale [[Nitrous Oxide]] instead of [[Carbon Dioxide|CO2]].

== Variants ==
<gallery>
ItemGasFilterCarbonDioxide.png|[[Carbon Dioxide|Carbon Dioxide (CO2)]]
ItemGasFilterChlorine.png|[[Pollutant|Pollutant (X)]]
ItemGasFilterHydrogen.png|[[Volatiles|Volatiles (H2)]]
ItemGasFilterNitrogen.png|[[Nitrogen|Nitrogen (N2)]]
ItemGasFilterOxygen.png|[[Oxygen|Oxygen (O2)]]
ItemGasFilterNitrousOxide.png|[[Nitrous Oxide|Nitrous Oxide (N2O)]]
</gallery>
</translate>

Filter

2024-06-18T10:18:38Z

Kaedys: /* Tips */ Updated to note that CO2 lacks the same toxicity as it has IRL

<languages />
<translate>
[[Category:Atmospherics]][[Category:Gas]]
{{Itembox
| name = Filter (''gas'')
| image = [[File:ItemGasFilterOxygen.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Iron]]
| stacks = no
}}
{{Itembox
| name = Medium Filter (''gas'')
| image = [[File:ItemGasFilterOxygenM.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Iron]], 5g [[Silver]], 1g [[Constantan]]
| stacks = no
}}
{{Itembox
| name = Heavy Filter (''gas'')
| image = [[File:ItemGasFilterOxygenL.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Steel]], 1g [[Invar]], 1g [[Stellite]]
| stacks = no
}}

Filters are used to filter out gas from an input. Only gasses matching the filters type will pass through it.

All filters of the same size cost the same regardless of type and can be made in the [[Hydraulic Pipe Bender]].

== Filter Size ==

* Small filter lasts 2 hours. 
* Medium filter lasts 10 hours. 
* Large filter lasts 40 hours. 
* Catalytic Filter lasts an unlimited amount of time, but are only available in creative mode.
* The duration is counted as the number of ticks the filter is being used, and only counts ticks in which the filter removed the targeted gas from the input volume. If none of the target gas is present in the input volume, the filter will not count as being used and will not degrade.

== Filter Types ==
* [[Carbon Dioxide|CO2]]
* [[Nitrogen]]
* [[Nitrous Oxide]]
* [[Oxygen]]
* [[Pollutant]]
* [[Volatiles]]
* [[Water]]

== Tips ==

# Players start the game with three filters, three [[Carbon Dioxide|CO2]] filters in the suit.
# Players breathe out [[Carbon Dioxide|CO2]] (just like in real life) and this may need to be considered when setting up a pressurized atmosphere where a helmet will not be worn.
## Note that unlike real life, where concentrations of CO2 as low as 7-10% can cause asphyxiation, CO2 in Stationeers is entirely safe. Players can comfortably breathe even very large ratios of CO2, as long as sufficient partial pressure of oxygen (specifically, 16 kPa) is also present.
# [[Arc Furnace|Arc Furnaces]] and [[Furnace|Furnaces]] produce waste products like pollutants or [[Carbon Dioxide|CO2]] which will need to be scrubbed out of a pressurized base (assuming the [[Furnace]] is not already hooked up to a [[Pipe]] system)
# If you're choosing to play as a [[Zrilian]] you will instead have 3 [[Nitrous Oxide]] filters instead of 3 [[Carbon Dioxide|CO2]] filters as they breath in [[hydrogen]] and exhale [[Nitrous Oxide]] instead of [[Carbon Dioxide|CO2]].

== Variants ==
<gallery>
ItemGasFilterCarbonDioxide.png|[[Carbon Dioxide|Carbon Dioxide (CO2)]]
ItemGasFilterChlorine.png|[[Pollutant|Pollutant (X)]]
ItemGasFilterHydrogen.png|[[Volatiles|Volatiles (H2)]]
ItemGasFilterNitrogen.png|[[Nitrogen|Nitrogen (N2)]]
ItemGasFilterOxygen.png|[[Oxygen|Oxygen (O2)]]
ItemGasFilterNitrousOxide.png|[[Nitrous Oxide|Nitrous Oxide (N2O)]]
</gallery>
</translate>

Filter

2024-06-18T10:12:57Z

Kaedys: Corrected and expanded filter size section

<languages />
<translate>
[[Category:Atmospherics]][[Category:Gas]]
{{Itembox
| name = Filter (''gas'')
| image = [[File:ItemGasFilterOxygen.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Iron]]
| stacks = no
}}
{{Itembox
| name = Medium Filter (''gas'')
| image = [[File:ItemGasFilterOxygenM.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Iron]], 5g [[Silver]], 1g [[Constantan]]
| stacks = no
}}
{{Itembox
| name = Heavy Filter (''gas'')
| image = [[File:ItemGasFilterOxygenL.png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Steel]], 1g [[Invar]], 1g [[Stellite]]
| stacks = no
}}

Filters are used to filter out gas from an input. Only gasses matching the filters type will pass through it.

All filters of the same size cost the same regardless of type and can be made in the [[Hydraulic Pipe Bender]].

== Filter Size ==

* Small filter lasts 2 hours. 
* Medium filter lasts 10 hours. 
* Large filter lasts 40 hours. 
* Catalytic Filter lasts an unlimited amount of time, but are only available in creative mode.
* The duration is counted as the number of ticks the filter is being used, and only counts ticks in which the filter removed the targeted gas from the input volume. If none of the target gas is present in the input volume, the filter will not count as being used and will not degrade.

== Filter Types ==
* [[Carbon Dioxide|CO2]]
* [[Nitrogen]]
* [[Nitrous Oxide]]
* [[Oxygen]]
* [[Pollutant]]
* [[Volatiles]]
* [[Water]]

== Tips ==

# Players start the game with three filters, three [[Carbon Dioxide|CO2]] filters in the suit.
# Players breathe out [[Carbon Dioxide|CO2]] (just like in real life) and this may need to be considered when setting up a pressurized atmosphere where a helmet will not be worn.
# [[Arc Furnace|Arc Furnaces]] and [[Furnace|Furnaces]] produce waste products like pollutants or [[Carbon Dioxide|CO2]] which will need to be scrubbed out of a pressurized base (assuming the [[Furnace]] is not already hooked up to a [[Pipe]] system)
# If you're choosing to play as a [[Zrilian]] you will instead have 3 [[Nitrous Oxide]] filters instead of 3 [[Carbon Dioxide|CO2]] filters as they breath in [[hydrogen]] and exhale [[Nitrous Oxide]] instead of [[Carbon Dioxide|CO2]].

== Variants ==
<gallery>
ItemGasFilterCarbonDioxide.png|[[Carbon Dioxide|Carbon Dioxide (CO2)]]
ItemGasFilterChlorine.png|[[Pollutant|Pollutant (X)]]
ItemGasFilterHydrogen.png|[[Volatiles|Volatiles (H2)]]
ItemGasFilterNitrogen.png|[[Nitrogen|Nitrogen (N2)]]
ItemGasFilterOxygen.png|[[Oxygen|Oxygen (O2)]]
ItemGasFilterNitrousOxide.png|[[Nitrous Oxide|Nitrous Oxide (N2O)]]
</gallery>
</translate>

Kit (Gas Fuel Generator)

2024-06-18T09:51:13Z

Kaedys: Updated notes section with additional details

<languages/>
<translate>


{{Itembox
| name = Kit (Gas Fuel Generator)
| image = [[File:ItemKitGasGenerator.png]]
| prefabhash = 377745425
| prefabname = ItemKitGasGenerator
| stacks = 1
| recipe_machine1 = Electronics Printer
| recipe_cost1 = 50g [[Iron]], 10g [[Copper]]
| constructs = [[Gas Fuel Generator]]
}}
{{Structurebox
| name = Gas Fuel Generator
| image = [[File:Gas generator front.png]]
| prefab_hash = 1165997963
| prefab_name = StructureGasGenerator
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| placed_with_item = [[Kit (Gas Fuel Generator)]]
| item_rec1 = [[Kit (Gas Fuel Generator)]]
}}

== Description == 
As the big brother of the [[Portable Generator]] the Gas Generator requires [[fuel]] and outputs crazy amounts of power if you don't throttle its gas input.

== Notes == 
* Power generation (as well as heat generated) scales with the amount of fuel available in the input pipe, up to a limit defined by the mix of gases used. This is determined by the moles of gas available in the input, not the absolute pressure.
** With a standard fuel mix (33/67 O/H2) can generate up to 14kW. With NOS fuel mix (50/50 NOS/H2) this rises to 98kW with a volume of 99kpa.
* Use a pressure regulator on the input is recommended. It should generally be set very low at first (potentially as low as as '''0.1kpa''', using a [[Labeller]] to enter decimal values), since it can be difficult to keep cool when run at full power.
* Recommended to connect to a [[Kit (Battery)]] and to automate it as backup power.
* Can be used in conjunction with a [[Atmospherics#Electrolyzer |Electrolyzer]] to generate its fuel.
* The output is a gas mix of CO2, [[Pollutant]]s, and tiny amounts of uncombusted fuel. It is not water, as would be implied by its compatibility with the Electrolyzer.
* Requires to be placed in an atmosphere to work. Minimum pressure of 20 kPA and temperature ranging between 278-328 degrees Kelvin (5-55 Celsius)
** If the surrounding atmosphere is absent, of insufficient pressure, or outside of the necessary temperature range, the generator will run for one tick and then automatically turn itself off. Since it does still produce power during that tick, the generator can be used in a complete vacuum at approximately half the maximum power output (since approximately every other tick it is turned off), but without any need to temperature regulate the surroundings, by using logic chips or an IC10 to force it to turn on again any time it is off. A battery or other power storage system is required to ensure the logic circuitry remains powered even after the generator shuts itself off
* Due to the magnitude of power generated, especially when using NOS fuel, heavy power cables are functionally required. If using multiple generators and/or NOS fuel while outputting to batteries, it is recommended to place 1 or 2 [[Transformer|Large Transformers]] between the generator(s) and the batteries to avoid burning out even heavy cable. Two large transformers set just below their maximum setting will prevent the batteries from drawing enough power from the generators to burn out the heavy cables.
* The generator has an internal volume of 10L.

== Videos == 

== Simple Overview ==
[https://youtu.be/2zMG96J3prw Stationeers 98Kw Gas fuel generator]

== Data Network Properties == 
These are all [[:Category:Data Network|Data Network]] properties of this device.

=== Data Parameters ===
These are all parameters, that can be written to with a [[Kit_(Logic_I/O)#Logic_Writer|Logic Writer]] or a [[Kit_(Logic_I/O)#Batch_Writer|Batch Writer]]. The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Setting || Float || (Unknown) Affects the Setting output.
|-
| On || Boolean || Turns the Gas Generator on, when set to 1. Turns it off, when set to 0.
|}

=== Data Outputs ===
These are all parameters, that can be read with a [[Kit_(Logic_I/O)#Logic_Reader|Logic Reader]]. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Gas Generator is turned on and receives power. (0 for no, 1 for yes)
|-
| Error || Boolean || Returns whether the Gas Generator is flashing an error. (0 for no, 1 for yes)
|-
| Pressure || Float || Returns the pressure in the Gas Generator in kilo pascal.
|-
| Temperature || Float || Returns the temperature in the Gas Generator in kelvin.
|-
| Setting || Float || (Unknown) Affected by the Setting parameter.
|-
| RatioOxygen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Gas Generator.
|-
| RatioCarbonDioxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Gas Generator.
|-
| RatioNitrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Gas Generator.
|-
| RatioPollutant || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Gas Generator.
|-
| RatioVolatiles || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Gas Generator.
|-
| RatioWater || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Gas Generator.
|-
| Maximum || Integer || (Unknown) Returns 100.
|-
| Ratio || Float || (Unknown) Returns 0.5.
|-
| On || Boolean || Returns whether the Gas Generator is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Float || ???
|-
| PowerGeneration || Float || Returns power production
|-
| TotalMoles || Interger || Returns total amount of fuel in moles
|-
| RationNitrousOxide || Float || Same as above
|-
| PrefabHash || ||
|-
| Combustion || ||
|-
|}

</translate>

Rice

2024-06-14T01:05:05Z

Kaedys: Updated description to match in-game behavior

[[Category:Plants]]
{{Itembox
| name = Rice
| image = [[File:Rice.png]]
| prefabhash = 658916791
| prefabname = ItemRice
| stacks = 50
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 3
| quality = Low (-25% hydration capacity)
| moodbonus = -25%
| growthtime = 1h 0min 1s
}}
<blockquote><q>Rice grows at a moderate rate as long as its supplied with plenty of water. Being more dependant  on water, rice plants can easily die during periods of drought.</q> 
'''- Stationpedia'''</blockquote>

Rice can be grown in hydroponics to yield 5 Rice and 1 Rice Seed when fully grown. They must be replanted after being harvested, using either a Rice Seed or raw Rice. Relative to other food crops, Rice consumes twice as much water per tick, but produces 67% more crop product when grown. As it has similar growth time to other food crops, this means it produces more food per hydroponics tray per time period, and more food per unit of CO2 consumed, but less food per unit of water consumed.

{{Hydroponics}}

{| class="wikitable"
|-
! Info !! Data
|-
| Time to fruiting || 1h 0min 1s
|-
| Yield || 5
|-
| Raw Nutrition || 6%
|-
| Edible By Chickens|| No
|}

Corn

2024-06-14T01:04:41Z

Kaedys: Added a new line for visual separating

<languages/>
[[Category:Plants]]
{{Itembox
| name = Corn
| image = [[File:ItemCorn.png]]
| prefabhash = 258339687
| prefabname = ItemCorn
| stacks = 20
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 10
| quality = Low (-25% hydration capacity)
| moodbonus = -25%
| growthtime = 2h 0min 1s
}}
<translate>

== Description == 
Corn can be grown in hydroponics to yield 3 Corn and 1 Corn Seed when fully grown. They must be replanted after being harvested, using either a Corn Seed or raw Corn. Corn takes approximately twice as long as other non-perennial (ie. has to be replanted after harvest) food crops to grow, but has unusually low darkness-per-day requirements, and thus can have its growth accelerate somewhat by using [[Grow Light|Grow Lights]] to keep it illuminated a larger portion of the day.

{{Hydroponics}}

{| class="wikitable"
|-
! Info !! Data
|-
| Time to fruiting || 10 minutes in light
|-
| Yield || 3
|-
| Raw Nutrition || 20%
|-
| Edible By Chickens|| Yes
|}

*Recommended to process 5 x Corn into [[Corn Soup]] in a [[Microwave]], as it is almost 3 times more hunger-efficient than raw corn and doesn't decay.
*Are the slowest growing non-perennial food crop, by approximately double.

</translate>

Corn

2024-06-14T00:52:08Z

Kaedys: Updated description to match in-game behavior

<languages/>
[[Category:Plants]]
{{Itembox
| name = Corn
| image = [[File:ItemCorn.png]]
| prefabhash = 258339687
| prefabname = ItemCorn
| stacks = 20
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 10
| quality = Low (-25% hydration capacity)
| moodbonus = -25%
| growthtime = 2h 0min 1s
}}
<translate>

== Description == 
Corn can be grown in hydroponics to yield 3 Corn and 1 Corn Seed when fully grown. They must be replanted after being harvested, using either a Corn Seed or raw Corn. Corn takes approximately twice as long as other non-perennial (ie. has to be replanted after harvest) food crops to grow, but has unusually low darkness-per-day requirements, and thus can have its growth accelerate somewhat by using [[Grow Light|Grow Lights]] to keep it illuminated a larger portion of the day.
{{Hydroponics}}

{| class="wikitable"
|-
! Info !! Data
|-
| Time to fruiting || 10 minutes in light
|-
| Yield || 3
|-
| Raw Nutrition || 20%
|-
| Edible By Chickens|| Yes
|}

*Recommended to process 5 x Corn into [[Corn Soup]] in a [[Microwave]], as it is almost 3 times more hunger-efficient than raw corn and doesn't decay.
*Are the slowest growing non-perennial food crop, by approximately double.

</translate>

Mushroom

2024-06-14T00:39:33Z

Kaedys: Tweaked description, fixed some wording, and shifted how the patch note reference is included, as well as noting that normal lights do not damage mushrooms

[[Category:Plants]]
{{Itembox
| name = Mushroom
| image = [[File:ItemMushroom.png]]
| prefabhash = 2044798572
| prefabname = ItemMushroom
| stacks = 20
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 10
| quality = Low (-25% hydration capacity)
| moodbonus = -25%
| growthtime = 1h 0min 1s
}}

Mushrooms can be grown in hydroponics without light to yield 3 Mushrooms and 1 Mushroom Seed when fully grown. They must be replanted after being harvested, using either a Mushroom Seed or a raw Mushroom. Unlike other plants, mushrooms will be damaged when exposed to sunlight or [[Grow Light|Grow Lights]]. Mushrooms are not damaged by exposure to suit lights, [[Portable Light|Portable Lights]], or normal [[Wall Light||Wall Lights]], only sunlight and Grow Lights.

As they are fungi, mushrooms consume O2 and produce CO2, the opposite of how other food crops work (a change, according to the implementation notes, intended to align with how fungi function in the real world<ref name="patchnotes">Official Steam patchnotes [https://store.steampowered.com/newshub/app/544550/view/2950386280126882874 Steam Newshub]</ref>). When farmed with an equal number of other food crop in an atmosphere containing both O2 and CO2, a net balance of gases can be achieved (O2 and CO2 will both be produced and consumed at the same rate). Note that mushrooms ''cannot'' be exposed to sunlight/Grow Lights, while other plants ''require'' sunlight/Grow Lights, so care must be taken if farming mushrooms with other plants in the same area.
 
{{Hydroponics}}

{| class="wikitable"
|-
! Info !! Data
|-
| Time to fruiting || 1 hour
|-
| Yield || 3
|-
| Raw Nutrition || 10%
|-
| Edible By Chickens|| No
|}
*Produces CO₂ and consumes O₂ at 0.072 mol/minute (0.0012 per tick)

==Sources==
<references />

Tomato

2024-06-13T17:56:07Z

Kaedys: Updated description to indicate perennial behavior

{{Infobox | decat = yes
| title = Tomato Seeds
| image = [[File:SeedBag_Tomato.png]]
| header2 = Temperature
{{Infobox | decat = yes | child = yes
| label1 = Flashpoint
| data1 = 373K (100°C)
| label2 = Autoignition
| data2 = 573K (300°C)
}}
| header3 = Other properties
{{Infobox | decat = yes | child = yes
| label1 = Paintable
| data1 = No
| label2 = Stack Size
| data2 = 10
}}
| header4 = Prefabs
{{Infobox | decat = yes | child = yes
| label1 = Prefab Hash
| data1 = -1922066841
| label2 = Prefab Name
| data2 = SeedBag_Tomato
}}
}}
{{Infobox | decat = yes
| title = Tomato
| image = [[File:ItemTomato.png]]
| header1 = Nutrition
{{Infobox | decat = yes | child = yes
| label1 = Edible
| data1 = yes
| label2 = Nutrition
| data2 = 15
}}
| header2 = Temperature
{{Infobox | decat = yes | child = yes
| label1 = Flashpoint
| data1 = 373K (100°C)
| label2 = Autoignition
| data2 = 573K (300°C)
}}
| header3 = Other properties
{{Infobox | decat = yes | child = yes
| label1 = Paintable
| data1 = No
| label2 = Stack Size
| data2 = 20
}}
| header4 = Prefabs
{{Infobox | decat = yes | child = yes
| label1 = Prefab Hash
| data1 = -998592080
| label2 = Prefab Name
| data2 = ItemTomato
}}
}}
== Description ==
<div style="width:auto; overflow:auto; border-radius:10px; background-color:white;">"Grow a Tomato" - Stationpedia (about Tomato Seed)</div>
 
<div style="width:auto; overflow:auto; border-radius:10px; background-color:white;">"Tomato plants are perennial, and will produce multiple harvests without needing to be replanted. Once the plant is mature, it will fruit at a moderate pace." - Stationpedia (about Tomato)</div>
{| class="wikitable"
|-
! Info !! Data
|-
| Yield || 3, then 1
|-
| Edible By [[Chicken|Chickens]]|| No
|}

==Growing==
Tomatoes can be grown in hydroponics. When first planted, they will yield 3 Tomatoes and 1 Tomato seed once fully grown. As a perennial crop, tomatoes do not need to be replanted, and will reset to the fruiting growth stage once harvested. After the first harvest, they will yield only 1 Tomato per harvest, rather than 3. The seed stage of growth occurs after the fruiting stage, both initially and when regrowing, and since the tomato plant does not need to be replanted when harvested, they can be harvested after fruiting but before seeding to approximately double the production of Tomatoes at the cost of not producing any further seeds. Like most food crops, Tomatoes can be grown from either Tomato Seeds or raw Tomatoes.

* Atmosphere: Minimum atmosphere pressure ~35 kPa, with 1% [[Carbon Dioxide]] and under 1KPa [[Pollutant]] (X).
* Consumes [[Carbon Dioxide]] and produce [[Oxygen]] at 8.64 mols per hour
* Temp: Minimum atmosphere temperature of 0C (273K) is required for growth, under 0C (273K) or over 50C (323K) the plants will die after 2 minutes.
* The ideal temperature range for maximum growth speed is between 20-30C
* Water: 5-60 Degree Celsius to avoid taking damage
* Plants require [[Water]], but consume only ~0.043 mols per hour
* Light: A [[Grow Light]]s are required for plant growth. For avoiding damage tomato needs 8 minutes of light per day, and 5 minutes of darkness per day.
* Optionally: you can increase yield or growth speed by adding fertilizer created in a [[Portable Composter]] or an [[Advanced Composter]]
More info can be found in [[Stationpedia]].

==Usage==
[[Category:Food]]
[[Category:Items]]
[[Category:Plants]]

Soybean

2024-06-13T17:48:54Z

Kaedys: Updated description

{{Itembox
| name = Soybean
| image = [[File:ItemSoybean.png]]
| prefabhash = 1924673028
| prefabname = ItemSoybean
| stacks = 100
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 5
| quality = Low (-25% hydration capacity)
| moodbonus = -25%
| growthtime = 1h 0min 1s
}}

{{Plantbox
| name = SoyaPlant
| image = [[File:Soy Plant.png|thumb|A Fruiting Soy Plant]]
| time_to_fruit = 60 minutes in light
| number_of_fruits = 3
}}

Soy can be grown in hydroponics to yield 3 Soybeans and 1 Soybean Seed once fully grown. They must be replanted after being harvested, using either a Soybean Seed or a raw Soybean. Useful for producing [[Soy_Oil|Soy Oil]], which is an ingredient to [[Milk]], [[Fries]], and [[Bread_Loaf|Bread Loaf]], as well being required for canned food production to avoid food spoilage.
{{Hydroponics}}

{| class="wikitable"
|-
! Info !! Data
|-
| Time To Fruiting || 60 minutes in light
|-
| Fruit || 3
|-
| Raw Nutrition || 10%
|-
| Edible By Chickens|| Yes
|}

More information:
* Processed in [[Reagent Processor]] into [[Soy Oil]].

Potato

2024-06-13T17:44:49Z

Kaedys: Updated description to match in-game behavior

[[Category:Plants]]
{{Itembox
| name = Potato
| image = [[File:ItemPotato.png]]
| prefabhash = 1929046963
| prefabname = ItemPotato
| stacks = 20
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 10
| quality = Low (-25% hydration capacity)
| moodbonus = -50%
| growthtime = 50min 1s
}}

==Description==
<blockquote><q>Potatoes are a simple, fast growing crop that can keep Stationeers alive in emergencies.</q> 
'''- Stationpedia'''</blockquote>

Potatoes can be grown in hydroponics to yield 2 Potatoes and 1 Potato Seed when fully grown. They must be replanted after being harvested, using either a Potato Seed or a raw Potato.

{| class="wikitable"
|-
! Info !! Data
|-
| Time to fruiting || 8 minutes in light
|-
| Yield || 2
|-
| Edible By [[Chicken|Chickens]]|| No
|}

==Growing==
{{Hydroponics}}

==Usage==
It's recommended to cook these little guys in the [[Microwave]] to turn them into [[Baked Potato|baked potatoes]] or save them to make some [[Fries]].

[[Category:Plants]]
[[Category:Food]]

Mushroom

2024-06-13T17:44:06Z

Kaedys: Updated description again

[[Category:Plants]]
{{Itembox
| name = Mushroom
| image = [[File:ItemMushroom.png]]
| prefabhash = 2044798572
| prefabname = ItemMushroom
| stacks = 20
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 10
| quality = Low (-25% hydration capacity)
| moodbonus = -25%
| growthtime = 1h 0min 1s
}}

Mushrooms can be grown in hydroponics without light to yield 3 Mushrooms and 1 Mushroom Seed when fully grown. They must be replanted after being harvested, using either a Mushroom Seed or a raw Mushroom. Unlike other plants, mushrooms will be damaged when exposed to sunlight or [[Grow Light|Grow Lights]].

Provide water into piping and O2 in atmosphere. The as they are fungi, they will consume O2 and ''produce CO2(!)''<ref name="patchnotes">Official Steam patchnotes [https://store.steampowered.com/newshub/app/544550/view/2950386280126882874 Steam Newshub]</ref>. When farmed with an equal number of other food crop, a net balance of gases can be achieved (O2 and CO2 with both be produced and consumed at the same rate). Note that mushrooms ''cannot'' be exposed to sunlight/Grow Lights, while other plants require sunlight/Grow Lights, so care must be taken if farming mushrooms with other plants in the same area.
 
{{Hydroponics}}

{| class="wikitable"
|-
! Info !! Data
|-
| Time to fruiting || 1 hour
|-
| Yield || 3
|-
| Raw Nutrition || 10%
|-
| Edible By Chickens|| No
|}
*Produces CO₂ and consumes O₂ at 0.072 mol/minute (0.0012 per tick)

==Sources==
<references />

Mushroom

2024-06-13T17:41:22Z

Kaedys: Updated paragraph formatting

[[Category:Plants]]
{{Itembox
| name = Mushroom
| image = [[File:ItemMushroom.png]]
| prefabhash = 2044798572
| prefabname = ItemMushroom
| stacks = 20
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 10
| quality = Low (-25% hydration capacity)
| moodbonus = -25%
| growthtime = 1h 0min 1s
}}

Mushrooms can be grown in hydroponics without light to yield 3x Mushrooms when fully grown. They will be damaged when exposed to sunlight.

Provide water into piping and O2 in atmosphere. The as they are fungi, they will consume O2 and ''produce CO2(!)''<ref name="patchnotes">Official Steam patchnotes [https://store.steampowered.com/newshub/app/544550/view/2950386280126882874 Steam Newshub]</ref>. When farmed with an equal number of other food crop, a net balance of gases can be achieved (O2 and CO2 with both be produced and consumed at the same rate). Note that mushrooms ''cannot'' be exposed to sunlight or [[Grow Light|Grow Lights]], while other plants require sunlight and/or Grow Lights, so care must be taken if farming mushrooms with other plants in the same area.
 
{{Hydroponics}}

{| class="wikitable"
|-
! Info !! Data
|-
| Time to fruiting || 1 hour
|-
| Yield || 3
|-
| Raw Nutrition || 10%
|-
| Edible By Chickens|| No
|}
*Produces CO₂ and consumes O₂ at 0.072 mol/minute (0.0012 per tick)

==Sources==
<references />

Mushroom

2024-06-13T17:40:28Z

Kaedys: Updated description to match in-game behavior

[[Category:Plants]]
{{Itembox
| name = Mushroom
| image = [[File:ItemMushroom.png]]
| prefabhash = 2044798572
| prefabname = ItemMushroom
| stacks = 20
| slot_class = SlotClass.Plant
| sorting_class = SortingClass.Resources
| nutrition = 10
| quality = Low (-25% hydration capacity)
| moodbonus = -25%
| growthtime = 1h 0min 1s
}}

Mushrooms can be grown in hydroponics without light to yield 3x Mushrooms when fully grown. They will be damaged when exposed to sunlight.
 Provide water into piping and O2 in atmosphere. The as they are fungi, they will consume O2 and ''produce CO2(!)''<ref name="patchnotes">Official Steam patchnotes [https://store.steampowered.com/newshub/app/544550/view/2950386280126882874 Steam Newshub]</ref>. When farmed with an equal number of other food crop, a net balance of gases can be achieved (O2 and CO2 with both be produced and consumed at the same rate). Note that mushrooms ''cannot'' be exposed to sunlight or [[Grow Light|Grow Lights]], while other plants require sunlight and/or Grow Lights, so care must be taken if farming mushrooms with other plants in the same area.
 
{{Hydroponics}}

{| class="wikitable"
|-
! Info !! Data
|-
| Time to fruiting || 1 hour
|-
| Yield || 3
|-
| Raw Nutrition || 10%
|-
| Edible By Chickens|| No
|}
*Produces CO₂ and consumes O₂ at 0.072 mol/minute (0.0012 per tick)

==Sources==
<references />

Combustor

2024-06-12T05:19:31Z

Kaedys: Updated content to reflect current functionality of the machine

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = H2 Combustor
| image = [[File:H2 Combustor.jpg]]
| power_usage = 10W
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Drill]]
| item_rec1 = [[Kit (Atmospherics)]]
}}

=Description=
Burns a fuel mixture of volatiles and oxygen to produce high-temperature [[Water|Steam]]. The H2 Combustor should be fed a 2:1 ratio of volatiles to oxygen. It will output mix of gases at 2500 C, made up of approximately 46.67% [[Carbon Dioxide]], 30% [[Water|Steam]], and 23.33% [[Pollutant||Pollutants]], plus trace amounts of unburnt volatiles and oxygen.

To generate electricity with fuel instead, see the [[Kit (Gas Fuel Generator)|Gas Fuel Generator]]. Alternatively, the heat generated by the H2 Combustor may be used with a [[Kit (Stirling Engine)|Stirling Engine]] to generate power at a much lower efficiency.

However, while lower efficiency than a Gas Fuel Generator, in terms of energy output per mole of fuel input, a [[Stirling Engine]] is a practical and effective first step for cooling the output due to the fact that it generates power from cooling, rather than consuming power to cool the output (such as with an [[Air Conditioner]]). Depending on the exact setup, and how efficiently the Stirling Engine can be cooled (best on cold non-vacuum planets like Europa and Mars), it's possible for the Stirling Engine to offset the power cost of H2 Combustor, Filtration, and the entire rest of the cooling system, resulting in a zero-loss or even net-positive system. Alternatively, the outputs may be air-cooled using radiators on cooler planets or in a vacuum.


=Characteristics=
* Consumes fuel from the input, requiring a 2:1 mix of volatiles to oxygen. Imprecise ratios will result in lower production rate, and the unburnt excess in the output.
* Produces approximately 46% more moles output than the fuel input consumed.
* Rate of fuel consumption from the input, and thus rate of production, is based on the pressure of the input. The unit will consume 3.42 L of fuel from the input each tick.
* Has an internal volume of 100L, where the product of the combustion is stored before being pushed to the output pipe.
* The unit, and gas inside it, will interact with the surrounding environment, as well as radiating heat in a vacuum (and thus cooling the gas inside it). In an air-filled room, this will significantly heat the surroundings.
* The initial temperature of the products is 2500 C.
* The water in the output is initially produced as a liquid before rapidly evaporating due to the temperature. This results in noticeable innate cooling of the output, up to ~100 C. Further losses from radiation or convection cooling of the surroundings also assist with this.
* Each tick that the unit is ''turned on'', it will first equalize its internal volume with the output pipe network, before pulling in and combusting more fuel to add to the internal volume.
** This only occurs when the unit is turned on, so if the unit is switched off, whatever gas remains in the unit will continue cooling through radiation or convection without equalizing to the output pipe.
** Since the equalization occurs before more fuel is pulled in, after the first tick the unit is on, it will have gases stored inside it but won't have pushed any to the output pipe yet.
** Has a ''Mode'' variable that can be set to 0 to allow the unit to be kept on, and continue to push gases to the output, without pulling more fuel in.
* Consumes only 10 W of power even when running.

{{Logic}}

{| class="wikitable"
|-
! Parameter !! Type !! Access !! Description
|-
| On || Boolean || Read/Write || The current state of the device, 0 for off, 1 for on.
|-
| Mode || Boolean || Read/Write || Whether the unit pulls in more fuel input, if the unit is also turned on. 1 (default) for pulling more fuel in, 0 to disable input.
|-
| Activate || Boolean || Read/Write || Same effect as, and synced with, the ''Mode'' var.
|-
| RequiredPower|| Float || Read-only || Idle and active operating power quantity. 10W.
|-
| Error || Boolean || Read-only || 1 if the device is in error state, otherwise 0.
|-
| Power || Float || Read-only || Can be read to return if the device is correctly powered or not, set via power system, return 1 if powered and 0 if not.
|-
| Setting || Integer || Read/Write || No apparent effect.
|-
| Lock || Boolean || Read/Write || 1 if a device is locked, otherwise 0, can be set in most devices and prevents the user from writing values.
|-
| PrefabHash || Integer || Read-only || The hash of the structure.
|-
| Maximum || Float || Read-only || Maximum setting of the device.
|-
| Ratio || Float || Read-only || Context specific value depending on the device, 0 to based ratio.
|}


=See Also=
* [[Kit (Atmospherics)]]
</translate>

Battery Cell

2024-05-27T04:23:46Z

Kaedys: Fixed the second item box just being a copy of the small battery first box, rather than including the large battery details. Removed energy calculation section, because that's now how watts and joules and game ticks work.

<languages />
<translate>
[[Category:Items]]
{{Itembox
| name = Battery Cell (Small)
| image = [[File:ItemBatteryCell.png]]
| prefabhash = 700133157
| prefabname = ItemBatteryCell
| recipe_machine1 = Electronics Printer
| recipe_cost1 = 2g [[Iron]], 2g [[Gold]], 5g [[Copper]]
}}
{{Itembox
| name = Battery Cell (Large)
| image = [[File:ItemBatteryCellLarge.png]]
| prefabhash = -459827268
| prefabname = ItemBatteryCellLarge
| recipe_machine1 = Electronics Printer
| recipe_cost1 = 5g [[Gold]], 10g [[Copper]], 5g [[Steel]]
}}
{{Itembox
| name = Battery Cell (Nuclear)
| image = [[File:ItemBatteryCellNuclear.png]]
| prefabhash = 544617306
| prefabname = ItemBatteryCellNuclear
| recipe_machine1 = Electronics Printer (Tier Two)
| recipe_cost1 = 5g [[Steel]], 5g [[Inconel]], 10g [[Astroloy]]
}}
== Description == 
The battery cells are used in many items and tools. Aside from energy capacity, they are interchangeable in all uses. Small cells will be depleted quite rapidly in certain items/tools, such as a suit, portable A/C, or [[Arc Welder]], however, due to their small energy capacity. Other tools, such as the [[Labeller]] and [[Laptop]], consume very little power and can be run off of even small cells for extended periods.
[[Battery Wireless Cell|Wireless cells]] are also available.

=== Battery Cell (Small) === 


* You can make small cells without Steel.
* They have a power capacity of 36,000J (10 Wh).

=== Battery Cell (Large) === 


* Large cells require Steel.
* They have a capacity of 288,000J (80 Wh).

=== Battery Cell (Nuclear) === 


* Nuclear cells require Steel, Inconel & Astroloy
* They have a capacity of 2,304,000J (640 Wh).

</translate>

== See Also ==
* [[Battery Wireless Cell]]
* [[Battery Charger]]
* [[Battery Charger Small]]

Charcoal

2024-05-26T05:49:04Z

Kaedys: Updated production section, and added section about use in water purifiers

game version: 0.2.4972

==Producing charcoal==
Charcoal is an ore, but it can't be mined. Instead, it must be produced from organic matter.

Plants, cooked food, decayed food, or seeds placed in a [[Special:MyLanguage/Recycler|Recycler]] will generate 1 Reagent Mix each. This Reagent Mix can be put it into a [[Special:MyLanguage/Centrifuge|Centrifuge]] to convert it to [[Special:MyLanguage/Biomass|Biomass]] (this step is optional, unless the Reagent Mix was mixed/stacked with other Reagent Mix containing different ingredients). Either the Biomass or the original Reagent Mix can be placed in an [[Special:MyLanguage/Arc Furnace|Arc Furnace]], or a [[Special:MyLanguage/Furnace|Furnace]]/[[Special:MyLanguage/Advanced Furnace|Advanced Furnace]] at over 580K and at least 100 kPa of pressure, to convert it into Charcoal.

Each conversion step is 1:1, so the overall ratio is 1 Charcoal for every 1 plant/cooked food/decayed food/seed.

==Steel from iron and charcoal==
Charcoal can replace Coal when making [[Special:MyLanguage/Steel|Steel]]. The ratio is the same, 1 Charcoal for every 3 Iron ore.

==Gases==
When Charcoal is burned in a Solid Generator it will release 3 mol CO2 and 3 mol of X. These gases can also be released in a Furnace or Arc-Furnace without destroying the Charcoal.

When Biomass is converted to Charcoal, each one will release 8 mol of Volatiles and 4 mol of X.

With Carbon Dioxide from Charcoal, Volatiles from Biomass, and Oxygen from living plants, it becomes possible to create a renewable cycle that creates and consumes these three gases. It's preferable to keep the level of Carbon Dioxide in the plants atmosphere as low as possible without allowing it to reach zero. This is because plants in the game will consume less Carbon Dioxide when there is less of it available, while still being able to grow at a normal rate and produce Oxygen at full capacity.

==Water Purification==
The [[Special:MyLanguage/Water Purifier|Water Purifier]] runs exclusively on Charcoal (it cannot use normal Coal as fuel), converting [[Special:MyLanguage/Polluted Water|Polluted Water]] back into clean [[Special:MyLanguage/Water|Water]]. This allows the Polluted Water output from a [[Special:MyLanguage/Shower|Shower]] to be cleaned and re-added to the main water stockpile, or simply re-used in the shower again.

==Fuel==
Charcoal can be burned in the [[Special:MyLanguage/Solid Fuel Generator|Solid Fuel Generator]] to produce power. But it does not behave like regular Coal does <ref>Source: https://www.reddit.com/r/Stationeers/comments/wrshsn/how_to_burn_charcoal_with_100_efficiency_in_a/</ref>.

When 1 Coal is burned, it will burn for 6 game-ticks (3 seconds) and release 20 kW of power each tick, for a total of 60 kJ.

When a stack of Charcoal is burned, they will not burn to completion, they will only burn for ~2 game-ticks which gives ~20 kJ energy each. Only ~33% of the available energy is obtained.

With a little bit of automation it's possible to release 100% of the energy from a stack of Charcoal. A Stacker controlled by an IC can be used to release the Charcoal one by one every 8 game-ticks, this is enough time for each Charcoal to always burn to completion.

Example IC code - releasing Charcoal from a Stacker to a Solid Generator to get 100% power efficiency:
<pre>
alias Stacker d0

s Stacker Mode 1
s Stacker Setting 1

MaxCharcoalPower:
yield
ls r0 Stacker 2 Occupied
beqz r0 MaxCharcoalPower
s Stacker Output 0
sleep 3.5
j MaxCharcoalPower

</pre>

==References==

Mining Belt

2024-05-15T18:26:34Z

Kaedys: Added note about ices not melting

[[Category:Items]]
{{Itembox
| name = Mining Belt
| image = [[File:ItemMiningBelt.png]]
| maxpressure =
| createdwith = [[Fabricator]] [[Tool Manufactory]]
| cost = 3x [[Iron]]
| volume =
}}

== Description ==

Used to store two mining tools (or 2 tools of any type) and 8 slots for ores. When the belt is equipped, mined ores are automatically stored inside it.

Items stored in the mining belt can be removed automatically using an [[Stacker#Unloader|Unloader]].

== Use in Storage ==

The Mining Belt's ability to store 8 ore stacks per belt while also fitting into a single backpack or locker slot, allows achieving incredible storage densities by placing multiple belts within the same inventory. A single [[Hardsuit Backpack]] using all slots to store Mining Belts could hold 96 stacks of ore. Using a double wide locker to hold Hardsuit Backpacks filled with ore would be capable of holding 2880 stacks of ore, or ''144000'' individual ores.

As with other mining belts/packs, ices stored in the belt will not melt or sublimate regardless of the exterior atmosphere, allowing indefinitely storage of ices even in hot atmospheres.

Mining Belts can be painted by dropping them on the ground and then using a [[Spray Paint]] can on them.

If you want more storage, upgrade to the [[Mining Belt MK II]] or add a [[Hard Mining Backpack]].

Mining Drill (Heavy)

2024-05-11T06:12:55Z

Kaedys: Updated description to note that there is not a Mk II of the heavy drill

<languages />
<translate>
[[Category:Tools]]
{{Itembox
| name = Mining Drill (Heavy)
| image = [[File:{{#setmainimage:ItemMiningDrillHeavy.png}}]]
| stacks = No
| createdwith = [[Tool Manufactory Mk. II]]
| cost = 10g [[Special:MyLanguage/Steel|Steel]], 10g [[Special:MyLanguage/Solder|Solder]], 5g [[Special:MyLanguage/Electrum|Electrum]], 10g [[Special:MyLanguage/Invar|Invar]]
}}
== Description == 
The Mining Drill (Heavy) has 2 modes, default and flatten, where the flatten mode levels the ground (it can not dig down). The drill is used for mining, and requires a [[Special:MyLanguage/Battery_Cell|battery]] to operate.

The benefit of this drill is that it mines much faster than the [[Special:MyLanguage/Mining_Drill|Mining Drill]]. Unlike the standard Mining Drill, the Mining Drill (Heavy) does not have a "Mk II" variant, as the base model has the same temperature tolerance as a Mk II of the standard Mining Drill. This makes it just as useful on extremely hot planets like [[Special:MyLanguage/Worlds#Vulcan|Vulcan]] as on other planets.
</translate>

Filtration

2023-08-17T06:01:06Z

Kaedys: Fixed unit, MPa*L, not MPa/L

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = Filtration
| image = [[File:filtration.jpg]]
| power_usage = 5w
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Atmospherics)]]
}}

=Description=
Used to separate [[Gas|gases]] from one [[Pipes|pipe]] network into another using [[Filter|filters]]. Can filter up to two (2) gases at once. [[Guide (Filtration)]] provides additional information regarding the function, construction, and operation of a Filtration unit.

=Usage=
Once you have placed the Filtration Unit in your desired location, there are 3 separate connections that will need to be made:
# '''Input''' - Starting gas network that you want to filter from
# '''Output''' - Filtered gas
# '''Waste''' - Remaining unfiltered gas from the input
 

Place the appropriate [[filter]](s) in the Filtration unit for the particular [[gas]] that your want to filter. Up to two filters can be placed into a filtration unit. If these are different types of filters, both types of gas will be filtered simultaneously. Placing two of the same type of filter in the unit does not increase filtration speed, it just provides redundancy for when one of the filters runs out.

Be aware that the filtration unit unrealistically has an infinitely powerful pump integrated into its output port. That means as long as it is turned on and there is gas to filter out from the input, it will pump that filtered out gas into the output pipe network (no matter how high the pressure in that output pipe network already is!). So eventually that pipe network will burst (around 60 MPa) unless you provide some sort of pop-off valve (e.g. a combination of a back-pressure regulator and a passive vent), use a pipe analyzer and some logic to turn the filtration unit off when a certain amount of pressure is exceeded in the output pipe network, or use the onboard IC10 and a data connection to the output (tank or pipe analyzer) to disable the unit when it reaches a certain threshold. Note that on-board IC10 chips do not execute when the unit is turned off, so an '''on-board''' IC10 is only capable of turning the unit '''off''' if output pressure is too high, it is not capable of turning the unit back '''on''' once output pressure drops.

As of patch [https://steamcommunity.com/app/544550/eventcomments/3812910660676171439 patch 0.2.4218.19726], the filtration system processing speed is based the difference between the pressure of input and '''higher pressure''' of the two outputs. If the higher-pressure output is equal to or higher than the input pressure, the unit will process an amount of input gas equivalent to 10 MPa per litre, per tick, with the amount pushed to the two outputs based on the partial pressure of the gas being filtered in the input. For example, if a unit is set to filter nitrogen, and the input is 20% at 10 MPa, and the higher of the two outputs is at >= 10 MPa (for example, if the waste output is connected back to the input), then the unit will push, per tick, 2 MPa-litres (ie. 200 kPa in a single 10 L pipe segment) to the filtered output, and 8 MPa-litres to the waste output.

If the pressure of the highest-pressure output is less than the input pressure, the unit will process per tick will be equal to 10 MPa*L + (PressureDifferential * 3.16885) MPa*L, where the PressureDifferential is the input pressure minus the output pressure, in MPa. As above, this output is split between the filtered output and the waste output based on the partial pressure of the filtered gas in the input. As an example, if the input pressure is 10 MPa at 20% nitrogen, and the higher-pressure of the outputs is at 2 MPa, the unit will process 1 + (10-2) * 3.16885 = 35.351 MPa*L, which is equivalent to increasing the pressure of a single 10 L pipe segment by 3.5351 MPa. 20% of this, or 7.07 MPa*L, would be pushed to the output (if the output is a single 10 L pipe segment, this would increase its pressure by 707 kPa), and the remaining 80% (28.28 MPa*L) would be pushed to the waste output.

In effect, if the waste output is connected to the input, and the filtered output is a single pipe segment (followed by a pump), the rate of output for the filtered gas will be 10 kPa per tick multiplied by the percentage of gas in the input that matches the filter (ex. if 20% nitrogen, 200 kPa to that single pipe segment per tick). If both the outputs are instead single pipe segments fed into volume pumps, so they remain at 0 pressure at all times, the rate of output of the filtered gas will be the percentage of the gas in the input that matches the filter multiplied by 1 MPa + 31.69% of the pressure of the input (ex. 10 MPa input, 20% nitrogen, the single pipe segment on the filtered output would gain 0.2 * (1 + 3.169) = 834 kPa per tick).

=Characteristics=
* It has a manual power switch.
* It consumes 10W of [[Power]] per [[Tick]] when idle and 44W when active.
* It has a separate [[Power Port]] and [[Data Port]].
* It has an on-board IC10 chip slot.
* It has a pipe port (labelled "Input") for the gas mixture from which the designated gas(es) '''will be''' filtered.
* It has a pipe port (labelled "Filtered") for the designated gas(es) that '''have been''' filtered. (This is in line with and directly opposite of the input)
* It has a pipe port (labelled "Unfiltered") for any remaining unfiltered gases. (This is to the side)
* It can filter up to 2 different gases at once by inserting two different filters.
** Inserting two of the '''same''' type of filter does not increase filtration speed.
Note: When using an I/O slot reader chip, the filter slots are labeled as slot 1, slot 2 and slot 3(IC), with 1 being the slot closer to the inlet.
When using an IC chip, the slots are labeled as slot 0, slot1 and slot 2(IC).

=User Interface=
A Filtration unit provides the following user interface:
{| class="wikitable"
|-
! Name || Type !! Function
|-
| [[Filters|Filter]] (Right) || Slot 0 || Port for a gas filter. If gas of the same type is present in the incoming mixture, it will be redirected out the "Filtered" pipe port.
|-
| Filter (Left) || Slot 1 || Another Port for a gas filter that functions the same as its twin slot. May contain the same or a different filter.
|-
| v || Slot 2 || IC10 placed in filtration unit (has 2 Input/Outputs)
|-
| On || Switch || Switches Filtration unit between turned on or turned off. (On=1/Off=0)
|-
|}

{{Data Network Header}}

{{Data Parameters}}

{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Powers on the Filtration unit on when set to 1. Powers off when set to 0.
|-
| Open || Boolean ||
|-
| Setting || Integer ||
|-
| Lock || Boolean ||
|-
| Mode || Boolean || 0: idle, 1: Active
|}

{{Data Outputs}}

{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Filtration unit is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Filtration unit IC Slot cover is open or closed. (0 for closed, 1 for open)
|-
| Mode || Boolean || Returns whether the Filtration unit is active or idle (0 for idle, 1 for Active)
|-
| Error || Boolean || Returns whether the Filtration unit is flashing an error. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Filtration unit is locked. (0 for no, 1 for yes)
|-
| Setting || Integer ||
|-
| Maximum || Integer ||
|-
| Ratio || Float ||
|-
| On || Boolean || Returns whether the Filtration unit is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power in Watts required by the Filtration unit.
|-
| PressureInput|| Float || Input pressure in kilopascals
|-
| TemperatureInput || Float || Input temperature in kelvin
|-
| RatioOxygenInput || Float || Percentage of Oxygen in input as ratio between 0 and 1
|-
| RatioCarbonDioxidenInput || Float || Percentage of Carbon Dioxide in input as ratio between 0 and 1
|-
| RatioNitrogenInput || Float || Percentage of Nitrogen in input as ratio between 0 and 1
|-
| RatioPollutantInput || Float || Percentage of Pollutant in input as ratio between 0 and 1
|-
| RatioVolatilesInput || Float || Percentage of Volatiles in input as ratio between 0 and 1
|-
| RatioWaterInput || Float || Percentage of Water in input as ratio between 0 and 1
|-
| RatioNitrousOxideInput || Float || Percentage of Nitrous Oxide in input as ratio between 0 and 1
|-
| TotalMolesInput|| Float || Total quantity of gas in input measured in moles
|-
| PressureOutput|| Float || Output pressure in kilopascals
|-
| TemperatureOutput || Float || Output temperature in kelvin
|-
| RatioOxygenOutput || Float || Percentage of Oxygen in output as ratio between 0 and 1
|-
| RatioCarbonDioxidenOutput || Float || Percentage of Carbon Dioxide in output as ratio between 0 and 1
|-
| RatioNitrogenOutput || Float || Percentage of Nitrogen in output as ratio between 0 and 1
|-
| RatioPollutantOutput || Float || Percentage of Pollutant in output as ratio between 0 and 1
|-
| RatioVolatilesOutput || Float || Percentage of Volatiles in output as ratio between 0 and 1
|-
| RatioWaterOutput || Float || Percentage of Water in output as ratio between 0 and 1
|-
| RatioNitrousOxideOutput || Float || Percentage of Nitrous Oxide in output as ratio between 0 and 1
|-
| TotalMolesOutput|| Float || Total quantity of gas in output measured in moles
|-
| PressureOutput2|| Float || Waste pressure in kilopascals
|-
| TemperatureOutput2 || Float || Waste temperature in kelvin
|-
| RatioOxygenOutput2 || Float || Percentage of Oxygen in waste as ratio between 0 and 1
|-
| RatioCarbonDioxidenOutput2 || Float || Percentage of Carbon Dioxide in waste as ratio between 0 and 1
|-
| RatioNitrogenOutput2 || Float || Percentage of Nitrogen in waste as ratio between 0 and 1
|-
| RatioPollutantOutput2 || Float || Percentage of Pollutant in waste as ratio between 0 and 1
|-
| RatioVolatilesOutput2 || Float || Percentage of Volatiles in waste as ratio between 0 and 1
|-
| RatioWaterOutput2 || Float || Percentage of Water in waste as ratio between 0 and 1
|-
| RatioNitrousOxideOutput2 || Float || Percentage of Nitrous Oxide in waste as ratio between 0 and 1
|-
| TotalMolesOutput2 || Float || Total quantity of gas in waste measured in moles
|-
| CombustionInput || Float ||
|-
| CombustionOutput || Float ||
|-
| CombustionOutput2 || Float ||
|}


==Slot Outputs==
Slot 0 and 1 are the two gas [[filter]]s. Slot 2 is the [[Integrated Circuit (IC10)|programmable chip]]
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Occupied || Boolean || Returns whether the slot is occupied. (0 for no, 1 for yes)
|-
| OccupantHash || Integer || Returns the hash of the object in the slot.
|-
| Quantity || Integer || Returns the current quantity, such as stack size, of the item in the slot.
|-
| Damage || Integer || Returns the damage state of the item in the slot.
|-
| Class || Integer || Returns an integer representing the class of object.
|-
| MaxQuanity || Integer || Returns max stack size of the item in the slot.
|-
| PrefabHash || Integer || Returns the hash of the structure in the slot.
|}


=See Also=
* [[Guide (Filtration)]]
* [[Kit (Atmospherics)]]
* [[Kit (Portable Scrubber) Portable Scrubber|Portable Scrubber]]
</translate>

Filtration

2023-08-17T05:22:35Z

Kaedys: Updated Phase Change update rate info based on further testing

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = Filtration
| image = [[File:filtration.jpg]]
| power_usage = 5w
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Atmospherics)]]
}}

=Description=
Used to separate [[Gas|gases]] from one [[Pipes|pipe]] network into another using [[Filter|filters]]. Can filter up to two (2) gases at once. [[Guide (Filtration)]] provides additional information regarding the function, construction, and operation of a Filtration unit.

=Usage=
Once you have placed the Filtration Unit in your desired location, there are 3 separate connections that will need to be made:
# '''Input''' - Starting gas network that you want to filter from
# '''Output''' - Filtered gas
# '''Waste''' - Remaining unfiltered gas from the input
 

Place the appropriate [[filter]](s) in the Filtration unit for the particular [[gas]] that your want to filter. Up to two filters can be placed into a filtration unit. If these are different types of filters, both types of gas will be filtered simultaneously. Placing two of the same type of filter in the unit does not increase filtration speed, it just provides redundancy for when one of the filters runs out.

Be aware that the filtration unit unrealistically has an infinitely powerful pump integrated into its output port. That means as long as it is turned on and there is gas to filter out from the input, it will pump that filtered out gas into the output pipe network (no matter how high the pressure in that output pipe network already is!). So eventually that pipe network will burst (around 60 MPa) unless you provide some sort of pop-off valve (e.g. a combination of a back-pressure regulator and a passive vent), use a pipe analyzer and some logic to turn the filtration unit off when a certain amount of pressure is exceeded in the output pipe network, or use the onboard IC10 and a data connection to the output (tank or pipe analyzer) to disable the unit when it reaches a certain threshold. Note that on-board IC10 chips do not execute when the unit is turned off, so an '''on-board''' IC10 is only capable of turning the unit '''off''' if output pressure is too high, it is not capable of turning the unit back '''on''' once output pressure drops.

As of patch [https://steamcommunity.com/app/544550/eventcomments/3812910660676171439 patch 0.2.4218.19726], the filtration system processing speed is based the difference between the pressure of input and '''higher pressure''' of the two outputs. If the higher-pressure output is equal to or higher than the input pressure, the unit will process an amount of input gas equivalent to 10 MPa per litre, per tick, with the amount pushed to the two outputs based on the partial pressure of the gas being filtered in the input. For example, if a unit is set to filter nitrogen, and the input is 20% at 10 MPa, and the higher of the two outputs is at >= 10 MPa (for example, if the waste output is connected back to the input), then the unit will push, per tick, 2 MPa per litre (ie. 200 kPa in a single 10 L pipe segment) to the filtered output, and 8 MPa per litre to the waste output.

If the pressure of the highest-pressure output is less than the input pressure, the unit will process per tick will be equal to 10 MPa/L + (PressureDifferential * 3.16885) MPa/L, where the PressureDifferential is the input pressure minus the output pressure, in MPa. As above, this output is split between the filtered output and the waste output based on the partial pressure of the filtered gas in the input. As an example, if the input pressure is 10 MPa at 20% nitrogen, and the higher-pressure of the outputs is at 2 MPa, the unit will process 1 + (10-2) * 3.16885 = 35.351 MPa/L, which is equivalent to increasing the pressure of a single 10 L pipe segment by 3.5351 MPa. 20% of this, or 7.07 MPa/L, would be pushed to the output (if the output is a single 10 L pipe segment, this would increase its pressure by 707 kPa), and the remaining 80% (28.28 MPa/L) would be pushed to the waste output.

In effect, if the waste output is connected to the input, and the filtered output is a single pipe segment (followed by a pump), the rate of output for the filtered gas will be 10 kPa per tick multiplied by the percentage of gas in the input that matches the filter (ex. if 20% nitrogen, 200 kPa to that single pipe segment per tick). If both the outputs are instead single pipe segments fed into volume pumps, so they remain at 0 pressure at all times, the rate of output of the filtered gas will be the percentage of the gas in the input that matches the filter multiplied by 1 MPa + 31.69% of the pressure of the input (ex. 10 MPa input, 20% nitrogen, the single pipe segment on the filtered output would gain 0.2 * (1 + 3.169) = 834 kPa per tick).

=Characteristics=
* It has a manual power switch.
* It consumes 10W of [[Power]] per [[Tick]] when idle and 44W when active.
* It has a separate [[Power Port]] and [[Data Port]].
* It has an on-board IC10 chip slot.
* It has a pipe port (labelled "Input") for the gas mixture from which the designated gas(es) '''will be''' filtered.
* It has a pipe port (labelled "Filtered") for the designated gas(es) that '''have been''' filtered. (This is in line with and directly opposite of the input)
* It has a pipe port (labelled "Unfiltered") for any remaining unfiltered gases. (This is to the side)
* It can filter up to 2 different gases at once by inserting two different filters.
** Inserting two of the '''same''' type of filter does not increase filtration speed.
Note: When using an I/O slot reader chip, the filter slots are labeled as slot 1, slot 2 and slot 3(IC), with 1 being the slot closer to the inlet.
When using an IC chip, the slots are labeled as slot 0, slot1 and slot 2(IC).

=User Interface=
A Filtration unit provides the following user interface:
{| class="wikitable"
|-
! Name || Type !! Function
|-
| [[Filters|Filter]] (Right) || Slot 0 || Port for a gas filter. If gas of the same type is present in the incoming mixture, it will be redirected out the "Filtered" pipe port.
|-
| Filter (Left) || Slot 1 || Another Port for a gas filter that functions the same as its twin slot. May contain the same or a different filter.
|-
| v || Slot 2 || IC10 placed in filtration unit (has 2 Input/Outputs)
|-
| On || Switch || Switches Filtration unit between turned on or turned off. (On=1/Off=0)
|-
|}

{{Data Network Header}}

{{Data Parameters}}

{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Powers on the Filtration unit on when set to 1. Powers off when set to 0.
|-
| Open || Boolean ||
|-
| Setting || Integer ||
|-
| Lock || Boolean ||
|-
| Mode || Boolean || 0: idle, 1: Active
|}

{{Data Outputs}}

{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Filtration unit is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Filtration unit IC Slot cover is open or closed. (0 for closed, 1 for open)
|-
| Mode || Boolean || Returns whether the Filtration unit is active or idle (0 for idle, 1 for Active)
|-
| Error || Boolean || Returns whether the Filtration unit is flashing an error. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Filtration unit is locked. (0 for no, 1 for yes)
|-
| Setting || Integer ||
|-
| Maximum || Integer ||
|-
| Ratio || Float ||
|-
| On || Boolean || Returns whether the Filtration unit is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power in Watts required by the Filtration unit.
|-
| PressureInput|| Float || Input pressure in kilopascals
|-
| TemperatureInput || Float || Input temperature in kelvin
|-
| RatioOxygenInput || Float || Percentage of Oxygen in input as ratio between 0 and 1
|-
| RatioCarbonDioxidenInput || Float || Percentage of Carbon Dioxide in input as ratio between 0 and 1
|-
| RatioNitrogenInput || Float || Percentage of Nitrogen in input as ratio between 0 and 1
|-
| RatioPollutantInput || Float || Percentage of Pollutant in input as ratio between 0 and 1
|-
| RatioVolatilesInput || Float || Percentage of Volatiles in input as ratio between 0 and 1
|-
| RatioWaterInput || Float || Percentage of Water in input as ratio between 0 and 1
|-
| RatioNitrousOxideInput || Float || Percentage of Nitrous Oxide in input as ratio between 0 and 1
|-
| TotalMolesInput|| Float || Total quantity of gas in input measured in moles
|-
| PressureOutput|| Float || Output pressure in kilopascals
|-
| TemperatureOutput || Float || Output temperature in kelvin
|-
| RatioOxygenOutput || Float || Percentage of Oxygen in output as ratio between 0 and 1
|-
| RatioCarbonDioxidenOutput || Float || Percentage of Carbon Dioxide in output as ratio between 0 and 1
|-
| RatioNitrogenOutput || Float || Percentage of Nitrogen in output as ratio between 0 and 1
|-
| RatioPollutantOutput || Float || Percentage of Pollutant in output as ratio between 0 and 1
|-
| RatioVolatilesOutput || Float || Percentage of Volatiles in output as ratio between 0 and 1
|-
| RatioWaterOutput || Float || Percentage of Water in output as ratio between 0 and 1
|-
| RatioNitrousOxideOutput || Float || Percentage of Nitrous Oxide in output as ratio between 0 and 1
|-
| TotalMolesOutput|| Float || Total quantity of gas in output measured in moles
|-
| PressureOutput2|| Float || Waste pressure in kilopascals
|-
| TemperatureOutput2 || Float || Waste temperature in kelvin
|-
| RatioOxygenOutput2 || Float || Percentage of Oxygen in waste as ratio between 0 and 1
|-
| RatioCarbonDioxidenOutput2 || Float || Percentage of Carbon Dioxide in waste as ratio between 0 and 1
|-
| RatioNitrogenOutput2 || Float || Percentage of Nitrogen in waste as ratio between 0 and 1
|-
| RatioPollutantOutput2 || Float || Percentage of Pollutant in waste as ratio between 0 and 1
|-
| RatioVolatilesOutput2 || Float || Percentage of Volatiles in waste as ratio between 0 and 1
|-
| RatioWaterOutput2 || Float || Percentage of Water in waste as ratio between 0 and 1
|-
| RatioNitrousOxideOutput2 || Float || Percentage of Nitrous Oxide in waste as ratio between 0 and 1
|-
| TotalMolesOutput2 || Float || Total quantity of gas in waste measured in moles
|-
| CombustionInput || Float ||
|-
| CombustionOutput || Float ||
|-
| CombustionOutput2 || Float ||
|}


==Slot Outputs==
Slot 0 and 1 are the two gas [[filter]]s. Slot 2 is the [[Integrated Circuit (IC10)|programmable chip]]
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Occupied || Boolean || Returns whether the slot is occupied. (0 for no, 1 for yes)
|-
| OccupantHash || Integer || Returns the hash of the object in the slot.
|-
| Quantity || Integer || Returns the current quantity, such as stack size, of the item in the slot.
|-
| Damage || Integer || Returns the damage state of the item in the slot.
|-
| Class || Integer || Returns an integer representing the class of object.
|-
| MaxQuanity || Integer || Returns max stack size of the item in the slot.
|-
| PrefabHash || Integer || Returns the hash of the structure in the slot.
|}


=See Also=
* [[Guide (Filtration)]]
* [[Kit (Atmospherics)]]
* [[Kit (Portable Scrubber) Portable Scrubber|Portable Scrubber]]
</translate>

Ice Crusher

2023-08-17T04:38:18Z

Kaedys: Added information on internal capacity and some rates

[[Category:Items]]
[[Category:Atmospherics]]
{{Itembox
| name = Kit (Ice Crusher)
| image = [[File:ItemKitIceCrusher.png]]
| maxpressure =
| volume =
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 3g [[Iron Ingot]], 1g [[Gold Ingot]], 1g [[Copper Ingot]]
}}
{{Structurebox
| name = Ice Crusher
| image = [[File:StructureIceCrusher.png]]
| power_usage = 10W standby + 40W crushing
| build states = Three
| placed_with_item = [[Kit (Ice Crusher)]]
| placed_on_grid = Small Grid
| const_with_tool1 = [[Welding Torch]]
| const_with_item1 = 1x [[Iron Sheets]]
| const_with_item2 = 2x [[Cable Coil]]
}}
{{Itembox
| name = Overall Ice Crusher Cost/Requirements
| image = [[File:StructureIceCrusher.png]]
| createdwith = [[Hydraulic Pipe Bender]], [[Autolathe]]
| cost = 1g [[Gold Ingot]], 2g [[Copper Ingot]], 5g [[Iron Ingot]]
}}

==Description==
This kit is used to crush ice into liquids and/or gases. The Ice Crusher has two outputs at the back, which can be connected to [[Pipes]] (yellow) and [[Liquid Pipe]] (blue) to extract the products. The top output is for Gas outputs, and the bottom output is for Liquids. Different kinds of Ice can be crushed:
:[[Ice (Water)]] produces liquid Water and [[Nitrogen]] gas (80% water, 20% nitrogen)
:[[Ice (Oxite)]] produces [[Oxygen]] and [[Nitrogen]] gas (90% Oxygen, 10% nitrogen)
:[[Ice (Volatiles)]] produces [[Hydrogen]] gas (100% Hydrogen)
:[[Ice (Nitrice)]] produces [[Nitrogen]] and [[Nitrous_Oxide]] gas (90% Nitrogen, 10% Nitrous Oxide)

==Refilling Water Bottles Early Game==
The ice crusher can be used to get drinkable water early on, by connecting it to a [[Water Bottle Filler]] using [[Liquid Pipe]] and piping the [[Nitrogen]] out with a pump or an [[Active Vent]] to avoid blocking the ice crusher. Note however that if done inside, this could lead to pressure accumulating over time, which could be dangerous if not eventually upgraded to a more robust gas handling system.

[[File:Ice Crusher Front View.jpg|thumb|Ice Crusher Front View (Caution: Water pipe should be connected to bottom output, not as shown here)]]

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Lock || Boolean || One(1) is locked, where as zero(0) is not locked
|-
| Setting || Integer ||
|-
| On || Boolean || One(1) is On, where as zero(0) is off
|-
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Maximum || Integer ||
|-
| Lock || Boolean || One(1) is locked, where as zero(0) is not locked
|-
| ImportCount || Integer ||
|-
| Error ||
|-
| Activate ||
|-
| Setting || Integer ||
|-
| RequiredPower || Integer ||
|-
| Ratio || Integer ||
|-
| Prefabhash || - || 443849486
|-
| Power || Boolean || One(1) is on, where as zero (0) is off
|-
| On || Boolean || One(1) is on, where as zero (0) is off
|}

==Notes==
* It can be safely used in higher temperature environments if the ice is transferred instantly into the crusher from the mining belt.
* When using it for crushing [[Ice (Water)]], 20% [[Nitrogen]] gas is still produced, and care must be taken to avoid overpressurization over time.
* It is not insulated, so the gases and/or liquids it contains will equalize temperature with the environment.
* Must be kept turned on to release the liquids and/or gases it contains.
* Has an internal capacity of 200L.
* Will not explode from overpressure of its internal capacity, but will stop crushing ice and flash an error if its internal pressure exceeds 125 MPa. It will resume crushing once its internal pressure drops below approximately 121 MPa.
* Outputs gas at a maximum rate of 9.231 MPa per tick into a single pipe segment (exactly 20 MPa into 6 pipe segments every 13 ticks), stopping once its internal pressure equals the pressure of the output port. This drops its internal pressure by 0.4615 MPa per tick.
* Can generate gas from crushing ice substantially faster than its maximum gas output rate, at a rate of approximately 5 MPa to its internal capacity per tick spent crushing ice.

Filtration

2023-08-16T16:52:54Z

Kaedys: Updated for changes in the recent Phase Change patch, where processing speed is now based on pressure differential

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = Filtration
| image = [[File:filtration.jpg]]
| power_usage = 5w
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Atmospherics)]]
}}

=Description=
Used to separate [[Gas|gases]] from one [[Pipes|pipe]] network into another using [[Filter|filters]]. Can filter up to two (2) gases at once. [[Guide (Filtration)]] provides additional information regarding the function, construction, and operation of a Filtration unit.

=Usage=
Once you have placed the Filtration Unit in your desired location, there are 3 separate connections that will need to be made:
# '''Input''' - Starting gas network that you want to filter from
# '''Output''' - Filtered gas
# '''Waste''' - Remaining unfiltered gas from the input
 

Place the appropriate [[filter]](s) in the Filtration unit for the particular [[gas]] that your want to filter. Up to two filters can be placed into a filtration unit. If these are different types of filters, both types of gas will be filtered simultaneously. Placing two of the same type of filter in the unit does not increase filtration speed, it just provides redundancy for when one of the filters runs out.

Be aware that the filtration unit unrealistically has an infinitely powerful pump integrated into its output port. That means as long as it is turned on and there is gas to filter out from the input, it will pump that filtered out gas into the output pipe network (no matter how high the pressure in that output pipe network already is!). So eventually that pipe network will burst (around 60 MPa) unless you provide some sort of pop-off valve (e.g. a combination of a back-pressure regulator and a passive vent), use a pipe analyzer and some logic to turn the filtration unit off when a certain amount of pressure is exceeded in the output pipe network, or use the onboard IC10 and a data connection to the output (tank or pipe analyzer) to disable the unit when it reaches a certain threshold. Note that on-board IC10 chips do not execute when the unit is turned off, so an '''on-board''' IC10 is only capable of turning the unit '''off''' if output pressure is too high, it is not capable of turning the unit back '''on''' once output pressure drops.

As of patch [https://steamcommunity.com/app/544550/eventcomments/3812910660676171439 patch 0.2.4218.19726], the filtration system processing speed is based the pressure differential between the input and output. The unit will output filtered gas equivalent to 10 L (one pipe segment) at a pressure equal to 1/40th of the partial pressure of the gas being filtered in the input. As an example, if the input is at 10 MPa and is 20% nitrogen (so partial pressure of nitrogen is 2 MPa), a filtration unit with a nitrogen filter will output, per tick, an amount of nitrogen equivalent to 50 kPa (2 MPa / 40) in a 10 L volume (~0.205 moles at 20 C). Since the partial pressure difference between the input and output directly impacts the speed, pressurizing the input is beneficial, as is attaching the output to a single pipe segment followed by an active [[Pipe Volume Pump|Volume Pump]] set to maximum throughput (10 L/tick) to ensure the output is at minimum pressure.

=Characteristics=
* It has a manual power switch.
* It consumes 10W of [[Power]] per [[Tick]] when idle and 44W when active.
* It has a separate [[Power Port]] and [[Data Port]].
* It has an on-board IC10 chip slot.
* It has a pipe port (labelled "Input") for the gas mixture from which the designated gas(es) '''will be''' filtered.
* It has a pipe port (labelled "Filtered") for the designated gas(es) that '''have been''' filtered. (This is in line with and directly opposite of the input)
* It has a pipe port (labelled "Unfiltered") for any remaining unfiltered gases. (This is to the side)
* It can filter up to 2 different gases at once by inserting two different filters.
Note: When using an I/O slot reader chip, the filter slots are labeled as slot 1, slot 2 and slot 3(IC), with 1 being the slot closer to the inlet.
When using an IC chip, the slots are labeled as slot 0, slot1 and slot 2(IC).

=User Interface=
A Filtration unit provides the following user interface:
{| class="wikitable"
|-
! Name || Type !! Function
|-
| [[Filters|Filter]] (Right) || Slot 0 || Port for a gas filter. If gas of the same type is present in the incoming mixture, it will be redirected out the "Filtered" pipe port.
|-
| Filter (Left) || Slot 1 || Another Port for a gas filter that functions the same as its twin slot. May contain the same or a different filter.
|-
| v || Slot 2 || IC10 placed in filtration unit (has 2 Input/Outputs)
|-
| On || Switch || Switches Filtration unit between turned on or turned off. (On=1/Off=0)
|-
|}

{{Data Network Header}}

{{Data Parameters}}

{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Powers on the Filtration unit on when set to 1. Powers off when set to 0.
|-
| Open || Boolean ||
|-
| Setting || Integer ||
|-
| Lock || Boolean ||
|-
| Mode || Boolean || 0: idle, 1: Active
|}

{{Data Outputs}}

{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Filtration unit is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Filtration unit IC Slot cover is open or closed. (0 for closed, 1 for open)
|-
| Mode || Boolean || Returns whether the Filtration unit is active or idle (0 for idle, 1 for Active)
|-
| Error || Boolean || Returns whether the Filtration unit is flashing an error. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Filtration unit is locked. (0 for no, 1 for yes)
|-
| Setting || Integer ||
|-
| Maximum || Integer ||
|-
| Ratio || Float ||
|-
| On || Boolean || Returns whether the Filtration unit is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power in Watts required by the Filtration unit.
|-
| PressureInput|| Float || Input pressure in kilopascals
|-
| TemperatureInput || Float || Input temperature in kelvin
|-
| RatioOxygenInput || Float || Percentage of Oxygen in input as ratio between 0 and 1
|-
| RatioCarbonDioxidenInput || Float || Percentage of Carbon Dioxide in input as ratio between 0 and 1
|-
| RatioNitrogenInput || Float || Percentage of Nitrogen in input as ratio between 0 and 1
|-
| RatioPollutantInput || Float || Percentage of Pollutant in input as ratio between 0 and 1
|-
| RatioVolatilesInput || Float || Percentage of Volatiles in input as ratio between 0 and 1
|-
| RatioWaterInput || Float || Percentage of Water in input as ratio between 0 and 1
|-
| RatioNitrousOxideInput || Float || Percentage of Nitrous Oxide in input as ratio between 0 and 1
|-
| TotalMolesInput|| Float || Total quantity of gas in input measured in moles
|-
| PressureOutput|| Float || Output pressure in kilopascals
|-
| TemperatureOutput || Float || Output temperature in kelvin
|-
| RatioOxygenOutput || Float || Percentage of Oxygen in output as ratio between 0 and 1
|-
| RatioCarbonDioxidenOutput || Float || Percentage of Carbon Dioxide in output as ratio between 0 and 1
|-
| RatioNitrogenOutput || Float || Percentage of Nitrogen in output as ratio between 0 and 1
|-
| RatioPollutantOutput || Float || Percentage of Pollutant in output as ratio between 0 and 1
|-
| RatioVolatilesOutput || Float || Percentage of Volatiles in output as ratio between 0 and 1
|-
| RatioWaterOutput || Float || Percentage of Water in output as ratio between 0 and 1
|-
| RatioNitrousOxideOutput || Float || Percentage of Nitrous Oxide in output as ratio between 0 and 1
|-
| TotalMolesOutput|| Float || Total quantity of gas in output measured in moles
|-
| PressureOutput2|| Float || Waste pressure in kilopascals
|-
| TemperatureOutput2 || Float || Waste temperature in kelvin
|-
| RatioOxygenOutput2 || Float || Percentage of Oxygen in waste as ratio between 0 and 1
|-
| RatioCarbonDioxidenOutput2 || Float || Percentage of Carbon Dioxide in waste as ratio between 0 and 1
|-
| RatioNitrogenOutput2 || Float || Percentage of Nitrogen in waste as ratio between 0 and 1
|-
| RatioPollutantOutput2 || Float || Percentage of Pollutant in waste as ratio between 0 and 1
|-
| RatioVolatilesOutput2 || Float || Percentage of Volatiles in waste as ratio between 0 and 1
|-
| RatioWaterOutput2 || Float || Percentage of Water in waste as ratio between 0 and 1
|-
| RatioNitrousOxideOutput2 || Float || Percentage of Nitrous Oxide in waste as ratio between 0 and 1
|-
| TotalMolesOutput2 || Float || Total quantity of gas in waste measured in moles
|-
| CombustionInput || Float ||
|-
| CombustionOutput || Float ||
|-
| CombustionOutput2 || Float ||
|}


==Slot Outputs==
Slot 0 and 1 are the two gas [[filter]]s. Slot 2 is the [[Integrated Circuit (IC10)|programmable chip]]
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Occupied || Boolean || Returns whether the slot is occupied. (0 for no, 1 for yes)
|-
| OccupantHash || Integer || Returns the hash of the object in the slot.
|-
| Quantity || Integer || Returns the current quantity, such as stack size, of the item in the slot.
|-
| Damage || Integer || Returns the damage state of the item in the slot.
|-
| Class || Integer || Returns an integer representing the class of object.
|-
| MaxQuanity || Integer || Returns max stack size of the item in the slot.
|-
| PrefabHash || Integer || Returns the hash of the structure in the slot.
|}


=See Also=
* [[Guide (Filtration)]]
* [[Kit (Atmospherics)]]
* [[Kit (Portable Scrubber) Portable Scrubber|Portable Scrubber]]
</translate>