Stationeers Community Wiki - User contributions [en]

Guide (Air Conditioner)

2026-01-19T20:24:21Z

Katree: Adding advanced setup

=Basic Setup=
Place the Kit (Atmospherics) and run some pipes to the place you want to vent the heat. Place a few [[Pipe Radiator]]s on the pipe, you can use any gas to fill it, but [[Carbon_Dioxide|CO2]] is the best thermal conductor, meaning it transfers heat faster and more efficiently. 
Make a return loop on the coolant system back to the coolant waste port for slightly better efficiency. 
It will try to draw or expel heat to the coolant mix to make the input match the desired output. A higher difference in the control panel temperature and input temperature makes the system use more power and also works faster. See the diagram for an example 
[[File:Coolant Example.png|frameless|Example A/C Setup]]

=Advanced Setup=
; Intake: The intake [[Passive_Vent | passive vent]] is located in the middle of the room to maximize its ability to draw gas evenly within the room.
; Output: The output from the air conditioning system has been positioned around the perimeter of the room to maximize its ability to heat/cool the room evenly.
; Waste: The waste network is connected to two [[:Category:Heat_Exchanger | heat exchangers]]: one for cooling the [[Coolant| waste gas]], and one for heating. The [[Furnace | furnace]] output gases are being used as a source of heat for the system. The external pipe network with connected [[Pipe_Radiator | radiators]] are used to cool the system. The [[Portable_Gas_Tank | portable gas tank]] is being used as a buffer tank for the system.
; Power Automation: The series of logic readers/writers is being used to automate turning the air conditioner unit on or off when the ambient temperature in the room reaches a set maximum or minimum temperature threshold.

[[File:Advanced ac unit configuation.png|1019x1323px |Example Advanced A/C Setup]]

Air Conditioner

2026-01-19T19:40:25Z

Katree: Adding new image

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = Air Conditioner
| image = [[File:Atmospherics front.jpg]]
| prefab_hash = -2087593337
| prefab_name = StructureAirConditioner
| power_usage = 10W + 340W when active
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| placed_with_item = [[Kit (Atmospherics)]]
| item_rec1 = [[Kit (Atmospherics)]]
| decon_with_tool2 = [[Wrench]]
| const_with_item1 = 2 x [[Kit (Pipe)]]
| decon_with_tool3 = [[Hand Drill]]
| const_with_tool2 = [[Screwdriver]]
| const_with_item2 = 2 x [[Cable Coil]]
}}

==Description==
Used to lower or raise the temperature of [[Gas]] in a [[Pipes|pipe]] network. It has a range of -270 through 999 Celsius for the temperature output. [[Guide (Air Conditioning)]] provides additional information regarding the function, construction, and operation of an Air Conditioner.

==Usage==
Once you have placed the Air Conditioner Unit in your desired location, there are 3 separate connections that will need to be made:
# '''Input''' - The starting gas that is desired to be cooled or heated
# '''Output''' - The exhausted gas after energy has been transferred to or from the [[Coolant]] in the waste pipe network
# '''Waste''' - Connection where energy is transferred to the [[Coolant]] in the pipe network

===Cooling===
The Air Conditioner will take the excess heat from the input gas and transfer it to the [[Coolant]] stored in the waste pipe network. Attached to the waste pipe network should be either [[Pipe Radiator|Pipe Radiators]] or [[Medium Radiator|Medium Radiators]] to either convect heat in a pressurized environment or radiate heat in a vacuum environment. Make the pipe network loop on back to the waste port after the radiators for slightly better efficiency.

==== Cooling on Hot Planets ====
Cooling down to room temperatures (<30°C) on hot planets can be challenging due to the significant temperature difference, which can lead to a decrease in efficiency. For better cooling results, set up multiple air conditioners in a series. Each air conditioner cools the waste of the previous one, until the last unit expels heat into the environment. This prevents efficiency drops due to high temperature differences. Use insulated pipes for the of the middle air conditioners for higher efficiency. As a rule, aim for one air conditioner per every 50°C difference in temperature as this keeps cooling effective on hot planets.

On planet '''[[Vulcan]]''', consider using high pressure and/or volume for the last pipe network to store cold from the night for the day. An extra room that you can open at night will also help improve efficiency.

On planet '''[[Venus]]''', it is one of the most essential tasks to persevere the unchanging heat of its atmosphere long enough to setup an Air Conditioner cooling stack and the power generation required to reliably run it. Start from the atmospheric gas itself, using it both as the working gas (or the Carbon Dioxide filtered out of it) and as the waste dump (which will convect the waste heat and remain at the same temperature), and circulating it in a closed loop (output lined back into the input) This first Conditioner will be able to produce the gas ~125°C cooler than the atmosphere entirely for the cost of power. Then, add another Conditioner, that would circulate the cooled gas from the previous unit (share some of it using a [[Pressure Regulator]] or [[Pipe Volume Pump]]), release waste heat into previous loop, and cool it further by another ~125°C before the temperature difference would lower the efficiency below meaningful levels. Repeating the same sequence multiple times will allow you to eventually obtain the Coolant, which can then be used to regulate the temperatures across the entire station. Four sequenced Air Conditioners would be enough to get a slow, but steady cooling for the station interior, and one additional Conditioner can be added to condense the gas into a liquid for fast (and optionally portable) cooling applications.

===Heating===
Ensuring the temperature of the [[coolant]] is higher than the temperature of the gas you are attempting to heat will allow the Air Conditioner Unit to heat the gas being run through the input port. Attaching a [[Pipe Heater]] is a quick method of raising the temperature of the coolant in the waste pipe network.

===Waste Pipe Network===
A connected gas [[Pipes|pipe]] network containing any desired [[Coolant]]. The Air Conditioner Unit will draw or expel heat from/to the coolant to adjust the input gas temperature to match the selected output temperature.

NOTE1: You must pressurize the waste pipe with a coolant gas before the unit will operate.

NOTE2: This image is also out of date. An active vent is no longer required. Two passive vents or two pipe cowls will work just fine for example, saving the 100 W of power an active vent uses and other strangeness with pressurizing the intake side of the pipe.

[[File:Coolant Example.png|frameless|Example A/C Setup]] [[File:Advanced ac unit configuation.png|frameless|Example Advanced A/C Setup]]

==Characteristics==
* It has a manual power switch.
* It has a door on the face of the unit that hides an IC chip slot and the two pins to connect two devices, via logic on the chip.
* It consumes 10W of [[Power]] per [[Tick]] when idle.
* It consumes 350W of [[Power]] per [[Tick]] when active.
* Basically, both speed and true efficiency is best at small temperature differences. For large temperature differences, more aircon units need to be put in series.
* It has a separate [[Power Port]] and [[Data Port]].
* It has a touchpad that provides manual temperature control.
* It has a pipe port (labelled "Input") for the gases that '''will be''' heated or cooled to the designated temperature.
* It has a pipe port (labelled "Output") for the gases that '''have been''' heated or cooled to the designated temperature.
* It has a pipe port (labelled "Waste") for gases to or from which heat will be transferred to raise or lower the input gases' temperature.
* Performance drops significantly if the temperature difference becomes too great. Chaining multiple systems, where each aircon cooling/heating the waste pipe of the previous, seems the best way to reach large temperature differences.
* Efficiency changes the effective cooling or heating speed. If it is due to decreasing the volume per tick or J per tick, I do not know.
Efficiency is lost if:
* you want to cool and the waste temp is higher than the input temp (and vice versa)
* Input temperature is outside optimal working temperature from -50 to 100 C.
* input temperature at 400°C ~ 33% efficency
* input temperature at 600°C ~ 10% efficency
* input temperature at 1000°C ~ 0% efficiency
* Efficiency drop due to temperature difference between input and waste is not linear. From 0 difference, efficiency ramps down, after goes straight, and finally levels around T diff ~= 100 (asymptote?) reaching 0% efficiency beyond. Treating it linear anyway, roughly speaking, the efficiency drops 1% per unit temperature difference.
* Efficiency drop due to temperature difference can be negative (>100%), if heat flow is in the working direction, but is low.

NOTE: The information below was left in, in case its still useful. It may not apply to the AC unit in its current form, due to changes in the AC unit. Will require further testing.

** The formula used appears to be: n x T x R = 10123
*** n = the number of moles of gas processed
*** T = input pipe temperature
*** R = 8.3144
* Once the amount of processed gas is known, the output temperature can be calculated
** T2 = T1 - 6000 / (n x H)
*** T2 = output processed gas temperature
*** T1 = input pipe temperature
*** n = number of moles of processed gas, see above
*** H = heat capacity of the gas in J/(mol x K), i.e. for CO2 it's 28.2 J/mol*K


==User Interface==
An Air Conditioner provides the following user interface:
{| class="wikitable"
|-
! Name || Type !! Function
|-
| Temperature || Display || Displays the current output temperature setting
|-
| + || Touchkey || Increase the current output temperature setting by 10°C and by 1°C with the Quantity Modifier key pressed.
|-
| - || Touchkey || Decrease the current output temperature setting by 10°C and by 1°C with the Quantity Modifier key pressed.
|-
| Start || Touchkey || Switches Air Conditioner between idle and active.
|-
| On/Off|| Switch || Switches Air Conditioner between turned on or turned off.
|-
|}

{{Data Network Header}}

{{Data Parameters|
{{Data Parameters/row|Power|Boolean|w=0|Can be read to return if the Air Conditioner is correctly powered or not, set via the power system, return 1 if powered and 0 if not|multiple=2|0|Unpowered|1|Powered}}
{{Data Parameters/row|Open|Integer|Returns whether the Air Conditioner's IC Slot cover is open or closed.|multiple=2|0|Closed|1|Open}}
{{Data Parameters/row|Mode|Integer|The mode of the Air Conditioner.|multiple=2|0|Idle|1|Active}}
{{Data Parameters/row|Error|Boolean|w=0|1 if device is in error state, otherwise 0|multiple=2|0||1|Error}}
{{Data Parameters/row|Lock|Boolean|Disable manual operation of the Air Conditioner.|multiple=2|0|Unlocked|1|Locked}}
{{Data Parameters/row|Setting|Integer|Target temperature setpoint in kelvin (K).}}
{{Data Parameters/row|Maximum|Float|w=0|Maximum temperature in kelvin (K)}}
{{Data Parameters/row|Ratio|Float|w=0|Context specific value depending on device, 0 to 1 based ratio|0.0 to 1.0}}
{{Data Parameters/row|On|Boolean|The current state of the Air Conditioner.|multiple=2|0|Off|1|On}}
{{Data Parameters/row|RequiredPower|Integer|w=0|Idle operating power quantity, does not necessarily include extra demand power}}
{{Data Parameters/row|PrefabHash|Integer|w=0|The hash of the structure}}
{{Data Parameters/row|PressureInput|Float|w=0|The current pressure reading of the Air Conditioner's input}}
{{Data Parameters/row|TemperatureInput|Float|w=0|The current temperature reading of the Air Conditioner's input}}
{{Data Parameters/row|RatioOxygenInput|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideInput|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenInput|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantInput|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesInput|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterInput|Float|w=0|The ratio of [[Water]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideInput|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesInput|Float|w=0|Returns the total moles of the Air Conditioner's input}}
{{Data Parameters/row|PressureOutput|Float|w=0|The current pressure reading of the Air Conditioner's output}}
{{Data Parameters/row|TemperatureOutput|Float|w=0|The current temperature reading of the Air Conditioner's output}}
{{Data Parameters/row|RatioOxygenOutput|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideOutput|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenOutput|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantOutput|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesOutput|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterOutput|Float|w=0|The ratio of [[Water]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideOutput|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesOutput|Float|w=0|Returns the total moles of the Air Conditioner's output}}
{{Data Parameters/row|PressureOutput2|Float|w=0|The current pressure reading of the Air Conditioner's waste output}}
{{Data Parameters/row|TemperatureOutput2|Float|w=0|The current temperature reading of the Air Conditioner's waste output}}
{{Data Parameters/row|RatioOxygenOutput2|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideOutput2|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenOutput2|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantOutput2|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesOutput2|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterOutput2|Float|w=0|The ratio of [[Water]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideOutput2|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesOutput2|Integer|w=0|Returns the total moles of the Air Conditioner's waste output}}
{{Data Parameters/row|CombustionInput|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's input is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|CombustionOutput|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's output is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|CombustionOutput2|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's waste output is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|OperationalTemperatureEfficiency|Float|w=0|How the input pipe's temperature effects the machines efficiency}}
{{Data Parameters/row|TemperatureDifferentialEfficiency|Float|w=0|How the difference between the input pipe and waste pipe temperatures effect the machines efficiency}}
{{Data Parameters/row|PressureEfficiency|Float|w=0|How the pressure of the input pipe and waste pipe effect the machines efficiency}}
{{Data Parameters/row|RatioLiquidNitrogenInput|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrogenOutput|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrogenOutput2|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenInput|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenOutput|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenOutput2|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesInput|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesOutput|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesOutput2|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamInput|Float|w=0|The ratio of [[Steam]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamOutput|Float|w=0|The ratio of [[Steam]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamOutput2|Float|w=0|The ratio of [[Steam]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideInput|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideOutput|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideOutput2|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantInput|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantOutput|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantOutput2|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideInput|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideOutput|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideOutput2|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|ReferenceId|Integer|w=0|Unique Reference Identifier for this object}}
{{Data Parameters/row|NameHash|Integer|w=0|Provides the hash value for the name of the object as a 32 bit integer.}}
}}


==See Also==
* [[Guide (Air Conditioner)]]
* [[Kit (Atmospherics)]]
* [[Kit (Portable Air Conditioner) Portable Air Conditioner|Portable Air Conditioner]]
* [[Kit (Radiator) Radiator|Radiator]]
* [[Kit (Wall Cooler)|Wall Cooler]]
* [[Kit (Wall Heater)|Wall Heater]]
* [https://youtu.be/q6639FX__c4 Stationeers Experiment - Air Conditioner]
</translate>

File:Advanced ac unit configuation.png

2026-01-19T19:36:27Z

Katree: A diagram showing how to setup an advanced ac configuration.

A diagram showing how to setup an advanced ac configuration.

Kit (Large Direct Heat Exchanger)

2026-01-19T03:35:50Z

Katree:

{{Itembox
| name = Kit (Large Direct Heat Exchanger)
| image =
| stacks = No
| paintable = Yes
| constructs = '''Large Direct Heat Exchanger - Gas + Gas''', '''Large Direct Heat Exchanger - Gas + Liquid''', '''Large Direct Heat Exchanger - Liquid + Liquid'''
| createdwith = [[Hydraulic Pipe Bender]] Tier two
| cost = 10g [[Steel]], 10g [[Invar]]
| prefabhash = 450164077
| prefabname = ItemKitLargeDirectHeatExchanger
| slot_class =
| sorting_class =
}}

{{Structurebox
| name =
Large Direct Heat Exchanger - 
Gas + Gas
[[File:Stationeers large direct heat exchanger gas to gas.png|In-game screenshot showing the exhchanger gas pipe inputs]]
Large Direct Heat Exchanger - 
Gas + Liquid
[[File:Stationeers large direct heat exchanger liquid to gas.png|In-game screenshot showing the exhchanger different pipe inputs]]
Large Direct Heat Exchanger - 
Liquid + Liquid
[[File:Stationeers large direct heat exchanger liquid to liquid.png|In-game screenshot showing the exhchanger liquid pipe inputs]]
| prefab_hash = Varies
| prefab_name = Varies
| placed_with_item = '''Kit (Large Direct Heat Exchanger)'''
| placed_on_grid = Small Grid

| const_with_tool1 = [[Wrench]]
| const_with_item1 = [[Kit (Pipe)]] x1
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = '''Kit (Large Direct Heat Exchanger)'''

| const_with_tool2 = [[Welder]]
| const_with_item2 = [[Steel Sheets]] x1
| decon_with_tool2 = [[Hand Drill]]
| item_rec2 = [[Kit (Pipe)]] x1

| const_with_tool3 =
| const_with_item3 =
| decon_with_tool3 = [[Hand Drill]]
| item_rec3 = [[Steel Sheets]] x1
}}

==Description==
<blockquote><q> Direct Heat Exchangers equalize the temperature of the two input networks. </q> 
'''- Stationpedia'''</blockquote>
Exchanges heat between two pipe networks very quickly, ~10x as fast as the [[Kit (Small Direct Heat Exchanger)‏‎|Small Direct Heat Exchanger]]. It's counterpart is the [[Kit (Counterflow Heat Exchanger)‏‎|Counterflow Heat Exchanger]]. pun intended
==Usage==
It's purpose is to equalize the temperature of two pipe networks without allowing their contents to mix. 
The heat exchanger does not have an internal volume and instead transfers heat directly between the two input pipe networks. A meter on the side displays the heat exchange rate in joules per tick.
===Heat Transfer===
Heat will flow from warmer to colder at a rate that increases with a greater difference in temperature. Newton's law of cooling can be used to approximate the rate of heat transfer according to the equation: 
Rate = k(T1-T2) 
Where: 
k = 425 Heat Exchange constant ''(Rough estimate)'' 
T1 = Input 1 Temperature 
T2 = Input 2 Temperature 
== Notes ==
* It has no logic port
* Requires frame support, unlike the small heat exchanger
* In older versions, [[Kit (Heat Exchanger)|heat exchangers]] had 2 inputs and 2 outputs intended for active liquid flow. This feature has been consolidated in the form of the [[Kit (Counterflow Heat Exchanger)|counterflow heat exchanger]]

=== Prefab Information ===
{| class="wikitable"
|-
! !! Prefab Hash !! Prefab Name
|-
| Gas to Gas ||-1230658883||StructureLargeDirectHeatExchangeGastoGas
|-
| Gas to Liquid ||1412338038||StructureLargeDirectHeatExchangeGastoLiquid
|-
| Liquid to Liquid ||792686502||StructureLargeDirectHeatExchangeLiquidtoLiquid
|}
[[Category:Atmospherics]][[Category:Heat Exchanger]]

Category:Heat Exchanger

2026-01-19T03:30:21Z

Katree: Creating Heat Exhanger catagory page

Exchanges heat between two pipe networks. Can be any combination of gas to gas, gas to liquid, or liquid to liquid.

Kit (Counterflow Heat Exchanger)

2026-01-19T03:23:28Z

Katree: Adding Heat Exhanger catagory

[[Category:Atmospherics]] [[Category:Heat Exchanger]]

{{Itembox
| image =
| name = Kit (Counterflow Heat Exchanger)
| createdwith = [[Hydraulic Pipe Bender]] Tier two
| cost = 10g [[Steel]], 10g [[Invar]]
| stacks = No
| paintable = Yes
| prefabhash = 6361127870
| prefabname = ItemKitPassthroughHeatExchanger
}}

{{Structurebox
| name =
Counterflow Heat Exchanger - 
Gas + Gas
[[File:Stationeers counterflow heat exchanger gas to gas.png|In game screenshot showing the gas pipe connections]]
Counterflow Heat Exchanger - 
Gas + Liquid
[[File:Stationeers counterflow heat exchanger gas to liquid.png|In game screenshot showing the different pipe connections]]
Counterflow Heat Exchanger - 
Liquid + Liquid
[[File:Stationeers counterflow heat exchanger liquid to liquid.png|In game screenshot showing the liquid pipe connections]]
| prefab_hash = Varies
| prefab_name = Varies
| placed_with_item = '''Kit (Counterflow Heat Exchanger)'''
| placed_on_grid = Small Grid

| const_with_tool1 = [[Welder]]
| const_with_item1 = [[Steel Sheets]] x1
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = '''Kit (Counterflow Heat Exchanger)'''

| const_with_tool2 =
| const_with_item2 =
| decon_with_tool2 = [[Wrench]]
| item_rec2 = [[Steel Sheets]] x1
}}

==Description==
{{description| Exchange heat from one pipe network to another. By drawing down the pressure of the outputs with a pump or regulator and regulating input pressures, the temperatures of the two counterflowing networks can be effectively exchanged. 
Balancing the throughput of both inputs is key to creating a good exchange of temperatures.}}

Swaps the temperature of two input fluids, how well it does this depends on the relative flow rate of each input. 
Perfect temperature exchange is thermodynamically impossible, and doesn't happen in stationeers either. The two connections on the top are part of network 1, and the two on the bottom are part of network 2. A meter on the side displays the heat exchange rate in joules per tick as well as the throughput of input 1 and 2 in moles per tick.
==Usage==
1. The intended use case for a counterflow heat exchanger is when you have two fluids with the same thermal mass flowing at the same rate in opposite directions. In this condition the heat exchanger will swap the temperatures of the two input fluids and send them to their outputs, possibly off by a few degrees. See first [[Kit (Counterflow Heat Exchanger)#Setup|example]]. 
*This can be useful for phase change cooling loops to warm the evaporated phase before it is condensed and to cool the condensed phase before it is evaporated, improving efficiency.
 
2. They are also commonly used as a more effective heat exchanger that can take greater advantage of a coolant's thermal energy and keep a consistant temperature in a pipe network. In this case fluid properties and flow rate are not the same. 
*Say you have a 20C coolant flow trying to cool down a trickle of hot waste gas down to 20C. As long as the flow ''(or thermal mass)'' of the coolant is much greater than the waste gas, the output temperature of the waste gas will always be very close to the coolant. If using the [[Kit (Large Direct Heat Exchanger)|Direct heat exchanger]] instead, the temperature would spike every time more hot gas was introduced to the network before cooling down to the temperature of the coolant again. See second [[Kit (Counterflow Heat Exchanger)#Setup|example]]. 
 

===Setup===
* Example temperature differences are exaggerated, usually the input 1 and output 2 temperatures get very close, within tenths of a degree.
Example showing how the two inputs can effectively exchange their temperatures in ideal conditions. 
[[File:Counter flow example diagram.png|Example of how to set up a counterflow heat exchanger]] 
 
Example showing how the initial temperature of network 1 determines the output temperature of network 2, when flowrate / thermal mass is skewed heavily in favor of network 1. 
[[File:Counter flow example 2 diagram.png|Example of how to set up a counterlow heat exchanger to consistently cool hot gas]] 

== Notes ==
* It has no logic port
* Requires frame support
* In older versions, [[Kit (Heat Exchanger)|heat exchangers]] had 2 inputs and 2 outputs intended for active liquid flow, but the heat swapping mechanic wasn't fleshed out. This eventually became the '''counterflow heat exchanger''' after the [[Update v0.2.4294.19984|Airflow update]].

=== Prefab Information ===
{| class="wikitable"
|-
! !! Prefab Hash !! Prefab Name
|-
| Gas to Gas ||-1674187440||StructurePassthroughHeatExchangerGasToGas
|-
| Gas to Liquid ||1928991265||StructurePassthroughHeatExchangerGasToLiquid
|-
| Liquid to Liquid ||-1472829583||StructurePassthroughHeatExchangerLiquidToLiquid
|}

Kit (Small Direct Heat Exchanger)

2026-01-19T03:22:16Z

Katree: Adding Heat Exhanger catagory

[[Category:Atmospherics]] [[Category:Heat Exchanger]]
{{Itembox
| image =
| name = Kit (Small Direct Heat Exchanger)
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Copper]], 3g [[Steel]]
| stacks = Yes (10)
| paintable = Yes
| prefabhash = -1332682164
| prefabname = ItemKitSmallDirectHeatExchanger
}}

{{Itembox
| image = [[File:Small direct heat exchanger gas to gas.png|in-game screenshot showing gas pipe inputs and meter]]
| name = Small Direct Heat Exchanger - Gas + Gas
| prefabhash = 1310303582
| prefabname = StructureSmallDirectHeatExchangeGastoGas
}}

{{Itembox
| image = [[File:Small direct heat exchanger liquid to gas.png|in-game screenshot showing different pipe inputs and meter]]
| name = Small Direct Heat Exchanger - Liquid + Gas
| prefabhash = 1825212016
| prefabname = StructureSmallDirectHeatExchangeLiquidtoGas
}}

{{Itembox
| image = [[File:Small direct heat exchanger liquid to liquid.png|in-game screenshot showing liquid pipe inputs and meter]]
| name = Small Direct Heat Exchanger - Liquid + Liquid
| prefabhash = -507770416
| prefabname = StructureSmallDirectHeatExchangeLiquidtoLiquid
}}

==Description==
Exchanges heat between two pipe networks. It's next upgrade is the [[Kit (Large Direct Heat Exchanger)‏‎| Large Direct Heat Exchanger]]. 

==Usage==
The kit produces 3 versions, gas to gas, liquid to gas and liquid to liquid. Each version has 2 pipe connections for pipe atmospheres whose contents' heat will be exchanged. The heat exchanger itself does not have an internal volume and instead acts directly on the input pipe networks. A meter on the side displays the heat exchange rate in joules (per tick?).

== Notes ==
In older versions, [[Kit (Heat Exchanger) |heat exchangers]] had 2 inputs and 2 outputs intended for active liquid flow. This feature has been consolidated in the form of the [[Kit (Counterflow Heat Exchanger)‏‎| counterflow heat exchanger]].

Kit (Large Direct Heat Exchanger)

2026-01-19T03:20:32Z

Katree: Assigning Heat Exchanger category

[[Category:Atmospherics]][[Category:Heat Exchanger]]
{{Itembox
| name = Kit (Large Direct Heat Exchanger)
| image =
| stacks = No
| paintable = Yes
| constructs = '''Large Direct Heat Exchanger - Gas + Gas''', '''Large Direct Heat Exchanger - Gas + Liquid''', '''Large Direct Heat Exchanger - Liquid + Liquid'''
| createdwith = [[Hydraulic Pipe Bender]] Tier two
| cost = 10g [[Steel]], 10g [[Invar]]
| prefabhash = 450164077
| prefabname = ItemKitLargeDirectHeatExchanger
| slot_class =
| sorting_class =
}}

{{Structurebox
| name =
Large Direct Heat Exchanger - 
Gas + Gas
[[File:Stationeers large direct heat exchanger gas to gas.png|In-game screenshot showing the exhchanger gas pipe inputs]]
Large Direct Heat Exchanger - 
Gas + Liquid
[[File:Stationeers large direct heat exchanger liquid to gas.png|In-game screenshot showing the exhchanger different pipe inputs]]
Large Direct Heat Exchanger - 
Liquid + Liquid
[[File:Stationeers large direct heat exchanger liquid to liquid.png|In-game screenshot showing the exhchanger liquid pipe inputs]]
| prefab_hash = Varies
| prefab_name = Varies
| placed_with_item = '''Kit (Large Direct Heat Exchanger)'''
| placed_on_grid = Small Grid

| const_with_tool1 = [[Wrench]]
| const_with_item1 = [[Kit (Pipe)]] x1
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = '''Kit (Large Direct Heat Exchanger)'''

| const_with_tool2 = [[Welder]]
| const_with_item2 = [[Steel Sheets]] x1
| decon_with_tool2 = [[Hand Drill]]
| item_rec2 = [[Kit (Pipe)]] x1

| const_with_tool3 =
| const_with_item3 =
| decon_with_tool3 = [[Hand Drill]]
| item_rec3 = [[Steel Sheets]] x1
}}

==Description==
<blockquote><q> Direct Heat Exchangers equalize the temperature of the two input networks. </q> 
'''- Stationpedia'''</blockquote>
Exchanges heat between two pipe networks very quickly, ~10x as fast as the [[Kit (Small Direct Heat Exchanger)‏‎|Small Direct Heat Exchanger]]. It's counterpart is the [[Kit (Counterflow Heat Exchanger)‏‎|Counterflow Heat Exchanger]]. pun intended
==Usage==
It's purpose is to equalize the temperature of two pipe networks without allowing their contents to mix. 
The heat exchanger does not have an internal volume and instead transfers heat directly between the two input pipe networks. A meter on the side displays the heat exchange rate in joules per tick.
===Heat Transfer===
Heat will flow from warmer to colder at a rate that increases with a greater difference in temperature. Newton's law of cooling can be used to approximate the rate of heat transfer according to the equation: 
Rate = k(T1-T2) 
Where: 
k = 425 Heat Exchange constant ''(Rough estimate)'' 
T1 = Input 1 Temperature 
T2 = Input 2 Temperature 
== Notes ==
* It has no logic port
* Requires frame support, unlike the small heat exchanger
* In older versions, [[Kit (Heat Exchanger)|heat exchangers]] had 2 inputs and 2 outputs intended for active liquid flow. This feature has been consolidated in the form of the [[Kit (Counterflow Heat Exchanger)|counterflow heat exchanger]]

=== Prefab Information ===
{| class="wikitable"
|-
! !! Prefab Hash !! Prefab Name
|-
| Gas to Gas ||-1230658883||StructureLargeDirectHeatExchangeGastoGas
|-
| Gas to Liquid ||1412338038||StructureLargeDirectHeatExchangeGastoLiquid
|-
| Liquid to Liquid ||792686502||StructureLargeDirectHeatExchangeLiquidtoLiquid
|}

Air Conditioner

2026-01-16T04:16:38Z

Katree: Restructering the text so that it is in paragraph form for better legibility

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = Air Conditioner
| image = [[File:Atmospherics front.jpg]]
| prefab_hash = -2087593337
| prefab_name = StructureAirConditioner
| power_usage = 10W + 340W when active
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| placed_with_item = [[Kit (Atmospherics)]]
| item_rec1 = [[Kit (Atmospherics)]]
| decon_with_tool2 = [[Wrench]]
| const_with_item1 = 2 x [[Kit (Pipe)]]
| decon_with_tool3 = [[Hand Drill]]
| const_with_tool2 = [[Screwdriver]]
| const_with_item2 = 2 x [[Cable Coil]]
}}

==Description==
Used to lower or raise the temperature of [[Gas]] in a [[Pipes|pipe]] network. It has a range of -270 through 999 Celsius for the temperature output. [[Guide (Air Conditioning)]] provides additional information regarding the function, construction, and operation of an Air Conditioner.

==Usage==
Once you have placed the Air Conditioner Unit in your desired location, there are 3 separate connections that will need to be made:
# '''Input''' - The starting gas that is desired to be cooled or heated
# '''Output''' - The exhausted gas after energy has been transferred to or from the [[Coolant]] in the waste pipe network
# '''Waste''' - Connection where energy is transferred to the [[Coolant]] in the pipe network

===Cooling===
The Air Conditioner will take the excess heat from the input gas and transfer it to the [[Coolant]] stored in the waste pipe network. Attached to the waste pipe network should be either [[Pipe Radiator|Pipe Radiators]] or [[Medium Radiator|Medium Radiators]] to either convect heat in a pressurized environment or radiate heat in a vacuum environment. Make the pipe network loop on back to the waste port after the radiators for slightly better efficiency.

==== Cooling on Hot Planets ====
Cooling down to room temperatures (<30°C) on hot planets can be challenging due to the significant temperature difference, which can lead to a decrease in efficiency. For better cooling results, set up multiple air conditioners in a series. Each air conditioner cools the waste of the previous one, until the last unit expels heat into the environment. This prevents efficiency drops due to high temperature differences. Use insulated pipes for the of the middle air conditioners for higher efficiency. As a rule, aim for one air conditioner per every 50°C difference in temperature as this keeps cooling effective on hot planets.

On planet '''Vulcan''', consider using high pressure and/or volume for the last pipe network to store cold from the night for the day. An extra room that you can open at night will also help improve efficiency.

On planet '''Venus''', it is one of the most essential tasks to persevere the unchanging heat of its atmosphere long enough to setup an Air Conditioner cooling stack and the power generation required to reliably run it. Start from the atmospheric gas itself, using it both as the working gas (or the Carbon Dioxide filtered out of it) and as the waste dump (which will convect the waste heat and remain at the same temperature), and circulating it in a closed loop (output lined back into the input) This first Conditioner will be able to produce the gas ~125°C cooler than the atmosphere entirely for the cost of power. Then, add another Conditioner, that would circulate the cooled gas from the previous unit (share some of it using a [[Pressure Regulator]] or [[Pipe Volume Pump]]), release waste heat into previous loop, and cool it further by another ~125°C before the temperature difference would lower the efficiency below meaningful levels. Repeating the same sequence multiple times will allow you to eventually obtain the Coolant, which can then be used to regulate the temperatures across the entire station. Four sequenced Air Conditioners would be enough to get a slow, but steady cooling for the station interior, and one additional Conditioner can be added to condense the gas into a liquid for fast (and optionally portable) cooling applications.

===Heating===
Ensuring the temperature of the [[coolant]] is higher than the temperature of the gas you are attempting to heat will allow the Air Conditioner Unit to heat the gas being run through the input port. Attaching a [[Pipe Heater]] is a quick method of raising the temperature of the coolant in the waste pipe network.

===Waste Pipe Network===
A connected gas [[Pipes|pipe]] network containing any desired [[Coolant]]. The Air Conditioner Unit will draw or expel heat from/to the coolant to adjust the input gas temperature to match the selected output temperature.

NOTE1: You must pressurize the waste pipe with a coolant gas before the unit will operate.

NOTE2: This image is also out of date. An active vent is no longer required. Two passive vents or two pipe cowls will work just fine for example, saving the 100 W of power an active vent uses and other strangeness with pressurizing the intake side of the pipe.

[[File:Coolant Example.png|frameless|Example A/C Setup]]

==Characteristics==
* It has a manual power switch.
* It has a door on the face of the unit that hides an IC chip slot and the two pins to connect two devices, via logic on the chip.
* It consumes 10W of [[Power]] per [[Tick]] when idle.
* It consumes 350W of [[Power]] per [[Tick]] when active.
* Basically, both speed and true efficiency is best at small temperature differences. For large temperature differences, more aircon units need to be put in series.
* It has a separate [[Power Port]] and [[Data Port]].
* It has a touchpad that provides manual temperature control.
* It has a pipe port (labelled "Input") for the gases that '''will be''' heated or cooled to the designated temperature.
* It has a pipe port (labelled "Output") for the gases that '''have been''' heated or cooled to the designated temperature.
* It has a pipe port (labelled "Waste") for gases to or from which heat will be transferred to raise or lower the input gases' temperature.
* Performance drops significantly if the temperature difference becomes too great. Chaining multiple systems, where each aircon cooling/heating the waste pipe of the previous, seems the best way to reach large temperature differences.
* Efficiency changes the effective cooling or heating speed. If it is due to decreasing the volume per tick or J per tick, I do not know.
Efficiency is lost if:
* you want to cool and the waste temp is higher than the input temp (and vice versa)
* Input temperature is outside optimal working temperature from -50 to 100 C.
* input temperature at 400°C ~ 33% efficency
* input temperature at 600°C ~ 10% efficency
* input temperature at 1000°C ~ 0% efficiency
* Efficiency drop due to temperature difference between input and waste is not linear. From 0 difference, efficiency ramps down, after goes straight, and finally levels around T diff ~= 100 (asymptote?) reaching 0% efficiency beyond. Treating it linear anyway, roughly speaking, the efficiency drops 1% per unit temperature difference.
* Efficiency drop due to temperature difference can be negative (>100%), if heat flow is in the working direction, but is low.

NOTE: The information below was left in, in case its still useful. It may not apply to the AC unit in its current form, due to changes in the AC unit. Will require further testing.

** The formula used appears to be: n x T x R = 10123
*** n = the number of moles of gas processed
*** T = input pipe temperature
*** R = 8.3144
* Once the amount of processed gas is known, the output temperature can be calculated
** T2 = T1 - 6000 / (n x H)
*** T2 = output processed gas temperature
*** T1 = input pipe temperature
*** n = number of moles of processed gas, see above
*** H = heat capacity of the gas in J/(mol x K), i.e. for CO2 it's 28.2 J/mol*K


==User Interface==
An Air Conditioner provides the following user interface:
{| class="wikitable"
|-
! Name || Type !! Function
|-
| Temperature || Display || Displays the current output temperature setting
|-
| + || Touchkey || Increase the current output temperature setting by 10°C and by 1°C with the Quantity Modifier key pressed.
|-
| - || Touchkey || Decrease the current output temperature setting by 10°C and by 1°C with the Quantity Modifier key pressed.
|-
| Start || Touchkey || Switches Air Conditioner between idle and active.
|-
| On/Off|| Switch || Switches Air Conditioner between turned on or turned off.
|-
|}

{{Data Network Header}}

{{Data Parameters|
{{Data Parameters/row|Power|Boolean|w=0|Can be read to return if the Air Conditioner is correctly powered or not, set via the power system, return 1 if powered and 0 if not|multiple=2|0|Unpowered|1|Powered}}
{{Data Parameters/row|Open|Integer|Returns whether the Air Conditioner's IC Slot cover is open or closed.|multiple=2|0|Closed|1|Open}}
{{Data Parameters/row|Mode|Integer|The mode of the Air Conditioner.|multiple=2|0|Idle|1|Active}}
{{Data Parameters/row|Error|Boolean|w=0|1 if device is in error state, otherwise 0|multiple=2|0||1|Error}}
{{Data Parameters/row|Lock|Boolean|Disable manual operation of the Air Conditioner.|multiple=2|0|Unlocked|1|Locked}}
{{Data Parameters/row|Setting|Integer|Target temperature setpoint in kelvin (K).}}
{{Data Parameters/row|Maximum|Float|w=0|Maximum temperature in kelvin (K)}}
{{Data Parameters/row|Ratio|Float|w=0|Context specific value depending on device, 0 to 1 based ratio|0.0 to 1.0}}
{{Data Parameters/row|On|Boolean|The current state of the Air Conditioner.|multiple=2|0|Off|1|On}}
{{Data Parameters/row|RequiredPower|Integer|w=0|Idle operating power quantity, does not necessarily include extra demand power}}
{{Data Parameters/row|PrefabHash|Integer|w=0|The hash of the structure}}
{{Data Parameters/row|PressureInput|Float|w=0|The current pressure reading of the Air Conditioner's input}}
{{Data Parameters/row|TemperatureInput|Float|w=0|The current temperature reading of the Air Conditioner's input}}
{{Data Parameters/row|RatioOxygenInput|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideInput|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenInput|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantInput|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesInput|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterInput|Float|w=0|The ratio of [[Water]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideInput|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesInput|Float|w=0|Returns the total moles of the Air Conditioner's input}}
{{Data Parameters/row|PressureOutput|Float|w=0|The current pressure reading of the Air Conditioner's output}}
{{Data Parameters/row|TemperatureOutput|Float|w=0|The current temperature reading of the Air Conditioner's output}}
{{Data Parameters/row|RatioOxygenOutput|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideOutput|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenOutput|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantOutput|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesOutput|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterOutput|Float|w=0|The ratio of [[Water]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideOutput|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesOutput|Float|w=0|Returns the total moles of the Air Conditioner's output}}
{{Data Parameters/row|PressureOutput2|Float|w=0|The current pressure reading of the Air Conditioner's waste output}}
{{Data Parameters/row|TemperatureOutput2|Float|w=0|The current temperature reading of the Air Conditioner's waste output}}
{{Data Parameters/row|RatioOxygenOutput2|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideOutput2|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenOutput2|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantOutput2|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesOutput2|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterOutput2|Float|w=0|The ratio of [[Water]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideOutput2|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesOutput2|Integer|w=0|Returns the total moles of the Air Conditioner's waste output}}
{{Data Parameters/row|CombustionInput|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's input is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|CombustionOutput|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's output is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|CombustionOutput2|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's waste output is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|OperationalTemperatureEfficiency|Float|w=0|How the input pipe's temperature effects the machines efficiency}}
{{Data Parameters/row|TemperatureDifferentialEfficiency|Float|w=0|How the difference between the input pipe and waste pipe temperatures effect the machines efficiency}}
{{Data Parameters/row|PressureEfficiency|Float|w=0|How the pressure of the input pipe and waste pipe effect the machines efficiency}}
{{Data Parameters/row|RatioLiquidNitrogenInput|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrogenOutput|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrogenOutput2|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenInput|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenOutput|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenOutput2|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesInput|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesOutput|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesOutput2|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamInput|Float|w=0|The ratio of [[Steam]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamOutput|Float|w=0|The ratio of [[Steam]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamOutput2|Float|w=0|The ratio of [[Steam]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideInput|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideOutput|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideOutput2|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantInput|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantOutput|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantOutput2|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideInput|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideOutput|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideOutput2|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|ReferenceId|Integer|w=0|Unique Reference Identifier for this object}}
{{Data Parameters/row|NameHash|Integer|w=0|Provides the hash value for the name of the object as a 32 bit integer.}}
}}


==See Also==
* [[Guide (Air Conditioner)]]
* [[Kit (Atmospherics)]]
* [[Kit (Portable Air Conditioner) Portable Air Conditioner|Portable Air Conditioner]]
* [[Kit (Radiator) Radiator|Radiator]]
* [[Kit (Wall Cooler)|Wall Cooler]]
* [[Kit (Wall Heater)|Wall Heater]]
* [https://youtu.be/q6639FX__c4 Stationeers Experiment - Air Conditioner]
</translate>

Air Conditioner

2026-01-16T04:07:46Z

Katree: Deleting breakline

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = Air Conditioner
| image = [[File:Atmospherics front.jpg]]
| prefab_hash = -2087593337
| prefab_name = StructureAirConditioner
| power_usage = 10W + 340W when active
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| placed_with_item = [[Kit (Atmospherics)]]
| item_rec1 = [[Kit (Atmospherics)]]
| decon_with_tool2 = [[Wrench]]
| const_with_item1 = 2 x [[Kit (Pipe)]]
| decon_with_tool3 = [[Hand Drill]]
| const_with_tool2 = [[Screwdriver]]
| const_with_item2 = 2 x [[Cable Coil]]
}}

==Description==
Used to lower or raise the temperature of [[Gas]] in a [[Pipes|pipe]] network. It has a range of -270 through 999 Celsius for the temperature output. [[Guide (Air Conditioning)]] provides additional information regarding the function, construction, and operation of an Air Conditioner.

==Usage==
Once you have placed the Air Conditioner Unit in your desired location, there are 3 separate connections that will need to be made:
# '''Input''' - The starting gas that is desired to be cooled or heated
# '''Output''' - The exhausted gas after energy has been transferred to or from the [[Coolant]] in the waste pipe network
# '''Waste''' - Connection where energy is transferred to the [[Coolant]] in the pipe network

===Cooling===
The Air Conditioner will take the excess heat from the input gas and transfer it to the [[Coolant]] stored in the waste pipe network. Attached to the waste pipe network should be either [[Pipe Radiator|Pipe Radiators]] or [[Medium Radiator|Medium Radiators]] to either convect heat in a pressurized environment or radiate heat in a vacuum environment. Make the pipe network loop on back to the waste port after the radiators for slightly better efficiency.

==== Cooling on Hot Planets ====
Cooling down to room temperatures (<30°C) on hot planets can be challenging due to the significant temperature difference, which can lead to a decrease in efficiency.

For better cooling results, set up multiple air conditioners in a series. Each air conditioner cools the waste of the previous one, until the last unit expels heat into the environment. This prevents efficiency drops due to high temperature differences.

Use insulated pipes for the of the middle air conditioners for higher efficiency. As a rule, aim for one air conditioner per every 50°C difference in temperature. This keeps cooling effective on hot planets.

On planet Vulcan, consider using high pressure and/or volume for the last pipe network to store cold from the night for the day. An extra room that you can open at night will also help improve efficiency.

On planet Venus, it is one of the most essential tasks to persevere the unchanging heat of its atmosphere long enough to setup an Air Conditioner cooling stack and the power generation required to reliably run it. Start from the atmospheric gas itself, using it both as the working gas (or the Carbon Dioxide filtered out of it) and as the waste dump (which will convect the waste heat and remain at the same temperature), and circulating it in a closed loop (output lined back into the input) This first Conditioner will be able to produce the gas ~125°C cooler than the atmosphere entirely for the cost of power.

Then, add another Conditioner, that would circulate the cooled gas from the previous unit (share some of it using a [[Pressure Regulator]] or [[Pipe Volume Pump]]), release waste heat into previous loop, and cool it further by another ~125°C before the temperature difference would lower the efficiency below meaningful levels.

Repeating the same sequence multiple times will allow you to eventually obtain the Coolant, which can then be used to regulate the temperatures across the entire station. Four sequenced Air Conditioners would be enough to get a slow, but steady cooling for the station interior, and one additional Conditioner can be added to condense the gas into a liquid for fast (and optionally portable) cooling applications.

===Heating===
Ensuring the temperature of the [[coolant]] is higher than the temperature of the gas you are attempting to heat will allow the Air Conditioner Unit to heat the gas being run through the input port. Attaching a [[Pipe Heater]] is a quick method of raising the temperature of the coolant in the waste pipe network.

===Waste Pipe Network===
A connected gas [[Pipes|pipe]] network containing any desired [[Coolant]]. The Air Conditioner Unit will draw or expel heat from/to the coolant to adjust the input gas temperature to match the selected output temperature.

NOTE1: You must pressurize the waste pipe with a coolant gas before the unit will operate.

NOTE2: This image is also out of date. An active vent is no longer required. Two passive vents or two pipe cowls will work just fine for example, saving the 100 W of power an active vent uses and other strangeness with pressurizing the intake side of the pipe.

[[File:Coolant Example.png|frameless|Example A/C Setup]]

==Characteristics==
* It has a manual power switch.
* It has a door on the face of the unit that hides an IC chip slot and the two pins to connect two devices, via logic on the chip.
* It consumes 10W of [[Power]] per [[Tick]] when idle.
* It consumes 350W of [[Power]] per [[Tick]] when active.
* Basically, both speed and true efficiency is best at small temperature differences. For large temperature differences, more aircon units need to be put in series.
* It has a separate [[Power Port]] and [[Data Port]].
* It has a touchpad that provides manual temperature control.
* It has a pipe port (labelled "Input") for the gases that '''will be''' heated or cooled to the designated temperature.
* It has a pipe port (labelled "Output") for the gases that '''have been''' heated or cooled to the designated temperature.
* It has a pipe port (labelled "Waste") for gases to or from which heat will be transferred to raise or lower the input gases' temperature.
* Performance drops significantly if the temperature difference becomes too great. Chaining multiple systems, where each aircon cooling/heating the waste pipe of the previous, seems the best way to reach large temperature differences.
* Efficiency changes the effective cooling or heating speed. If it is due to decreasing the volume per tick or J per tick, I do not know.
Efficiency is lost if:
* you want to cool and the waste temp is higher than the input temp (and vice versa)
* Input temperature is outside optimal working temperature from -50 to 100 C.
* input temperature at 400°C ~ 33% efficency
* input temperature at 600°C ~ 10% efficency
* input temperature at 1000°C ~ 0% efficiency
* Efficiency drop due to temperature difference between input and waste is not linear. From 0 difference, efficiency ramps down, after goes straight, and finally levels around T diff ~= 100 (asymptote?) reaching 0% efficiency beyond. Treating it linear anyway, roughly speaking, the efficiency drops 1% per unit temperature difference.
* Efficiency drop due to temperature difference can be negative (>100%), if heat flow is in the working direction, but is low.

NOTE: The information below was left in, in case its still useful. It may not apply to the AC unit in its current form, due to changes in the AC unit. Will require further testing.

** The formula used appears to be: n x T x R = 10123
*** n = the number of moles of gas processed
*** T = input pipe temperature
*** R = 8.3144
* Once the amount of processed gas is known, the output temperature can be calculated
** T2 = T1 - 6000 / (n x H)
*** T2 = output processed gas temperature
*** T1 = input pipe temperature
*** n = number of moles of processed gas, see above
*** H = heat capacity of the gas in J/(mol x K), i.e. for CO2 it's 28.2 J/mol*K


==User Interface==
An Air Conditioner provides the following user interface:
{| class="wikitable"
|-
! Name || Type !! Function
|-
| Temperature || Display || Displays the current output temperature setting
|-
| + || Touchkey || Increase the current output temperature setting by 10°C and by 1°C with the Quantity Modifier key pressed.
|-
| - || Touchkey || Decrease the current output temperature setting by 10°C and by 1°C with the Quantity Modifier key pressed.
|-
| Start || Touchkey || Switches Air Conditioner between idle and active.
|-
| On/Off|| Switch || Switches Air Conditioner between turned on or turned off.
|-
|}

{{Data Network Header}}

{{Data Parameters|
{{Data Parameters/row|Power|Boolean|w=0|Can be read to return if the Air Conditioner is correctly powered or not, set via the power system, return 1 if powered and 0 if not|multiple=2|0|Unpowered|1|Powered}}
{{Data Parameters/row|Open|Integer|Returns whether the Air Conditioner's IC Slot cover is open or closed.|multiple=2|0|Closed|1|Open}}
{{Data Parameters/row|Mode|Integer|The mode of the Air Conditioner.|multiple=2|0|Idle|1|Active}}
{{Data Parameters/row|Error|Boolean|w=0|1 if device is in error state, otherwise 0|multiple=2|0||1|Error}}
{{Data Parameters/row|Lock|Boolean|Disable manual operation of the Air Conditioner.|multiple=2|0|Unlocked|1|Locked}}
{{Data Parameters/row|Setting|Integer|Target temperature setpoint in kelvin (K).}}
{{Data Parameters/row|Maximum|Float|w=0|Maximum temperature in kelvin (K)}}
{{Data Parameters/row|Ratio|Float|w=0|Context specific value depending on device, 0 to 1 based ratio|0.0 to 1.0}}
{{Data Parameters/row|On|Boolean|The current state of the Air Conditioner.|multiple=2|0|Off|1|On}}
{{Data Parameters/row|RequiredPower|Integer|w=0|Idle operating power quantity, does not necessarily include extra demand power}}
{{Data Parameters/row|PrefabHash|Integer|w=0|The hash of the structure}}
{{Data Parameters/row|PressureInput|Float|w=0|The current pressure reading of the Air Conditioner's input}}
{{Data Parameters/row|TemperatureInput|Float|w=0|The current temperature reading of the Air Conditioner's input}}
{{Data Parameters/row|RatioOxygenInput|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideInput|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenInput|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantInput|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesInput|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterInput|Float|w=0|The ratio of [[Water]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideInput|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesInput|Float|w=0|Returns the total moles of the Air Conditioner's input}}
{{Data Parameters/row|PressureOutput|Float|w=0|The current pressure reading of the Air Conditioner's output}}
{{Data Parameters/row|TemperatureOutput|Float|w=0|The current temperature reading of the Air Conditioner's output}}
{{Data Parameters/row|RatioOxygenOutput|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideOutput|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenOutput|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantOutput|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesOutput|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterOutput|Float|w=0|The ratio of [[Water]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideOutput|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesOutput|Float|w=0|Returns the total moles of the Air Conditioner's output}}
{{Data Parameters/row|PressureOutput2|Float|w=0|The current pressure reading of the Air Conditioner's waste output}}
{{Data Parameters/row|TemperatureOutput2|Float|w=0|The current temperature reading of the Air Conditioner's waste output}}
{{Data Parameters/row|RatioOxygenOutput2|Float|w=0|The ratio of [[Oxygen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioCarbonDioxideOutput2|Float|w=0|The ratio of [[Carbon Dioxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrogenOutput2|Float|w=0|The ratio of [[Nitrogen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioPollutantOutput2|Float|w=0|The ratio of [[Pollutant]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioVolatilesOutput2|Float|w=0|The ratio of [[Volatiles]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioWaterOutput2|Float|w=0|The ratio of [[Water]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioNitrousOxideOutput2|Float|w=0|The ratio of [[Nitrous Oxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|TotalMolesOutput2|Integer|w=0|Returns the total moles of the Air Conditioner's waste output}}
{{Data Parameters/row|CombustionInput|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's input is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|CombustionOutput|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's output is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|CombustionOutput2|Boolean|w=0|Assess if the atmosphere is on fire. Returns 1 if Air Conditioner's waste output is on fire, 0 if not.|0 or 1}}
{{Data Parameters/row|OperationalTemperatureEfficiency|Float|w=0|How the input pipe's temperature effects the machines efficiency}}
{{Data Parameters/row|TemperatureDifferentialEfficiency|Float|w=0|How the difference between the input pipe and waste pipe temperatures effect the machines efficiency}}
{{Data Parameters/row|PressureEfficiency|Float|w=0|How the pressure of the input pipe and waste pipe effect the machines efficiency}}
{{Data Parameters/row|RatioLiquidNitrogenInput|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrogenOutput|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrogenOutput2|Float|w=0|The ratio of [[Nitrogen#Liquid|Liquid Nitrogen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenInput|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenOutput|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidOxygenOutput2|Float|w=0|The ratio of [[Oxygen#Liquid|Liquid Oxygen]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesInput|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesOutput|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidVolatilesOutput2|Float|w=0|The ratio of [[Volatiles#Liquid|Liquid Volatiles]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamInput|Float|w=0|The ratio of [[Steam]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamOutput|Float|w=0|The ratio of [[Steam]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioSteamOutput2|Float|w=0|The ratio of [[Steam]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideInput|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideOutput|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidCarbonDioxideOutput2|Float|w=0|The ratio of [[Carbon Dioxide#Liquid|Liquid Carbon Dioxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantInput|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantOutput|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidPollutantOutput2|Float|w=0|The ratio of [[Pollutant#Liquid|Liquid Pollutant]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideInput|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's input|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideOutput|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's output|0.0 to 1.0}}
{{Data Parameters/row|RatioLiquidNitrousOxideOutput2|Float|w=0|The ratio of [[Nitrous Oxide#Liquid|Liquid Nitrous Oxide]] in Air Conditioner's waste output|0.0 to 1.0}}
{{Data Parameters/row|ReferenceId|Integer|w=0|Unique Reference Identifier for this object}}
{{Data Parameters/row|NameHash|Integer|w=0|Provides the hash value for the name of the object as a 32 bit integer.}}
}}


==See Also==
* [[Guide (Air Conditioner)]]
* [[Kit (Atmospherics)]]
* [[Kit (Portable Air Conditioner) Portable Air Conditioner|Portable Air Conditioner]]
* [[Kit (Radiator) Radiator|Radiator]]
* [[Kit (Wall Cooler)|Wall Cooler]]
* [[Kit (Wall Heater)|Wall Heater]]
* [https://youtu.be/q6639FX__c4 Stationeers Experiment - Air Conditioner]
</translate>

Filtration

2026-01-16T03:59:36Z

Katree: Removing the unnessesary language for the connection ports

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = Filtration
| image = [[File:filtration.jpg]]
| prefab_hash = -348054045
| power_usage = 10-110w
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid

| const_with_item1 = 2 x [[Kit (Pipe)]]
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Atmospherics)]]

| const_with_tool2 = [[Screwdriver]]
| const_with_item2 = [[Cable Coil]]
| decon_with_tool2 = [[Wrench]]

| decon_with_tool3 = [[Hand Drill]]
}}

=Description=
Filtration Unit is a powered machine, that is used to separate [[Gas|gases]] from one [[Pipes|pipe]] network into another using [[Filter|filters]]. Identical to most other machines deployable from the [[Kit (Atmospherics)]], Filtration unit occupies a 2x1 space on the small building grid supported by a frame. Back face of the unit provide floor-level power and logic cable ports, while the front side holds the control panel and two filter sockets. Front and either side also feature dedicated one-way pipe slots for managing gas inputs and ouputs.

=Usage=
Once you have placed the Filtration Unit in your desired location, there are 3 separate pipe connections that will need to be made:
# '''Input''' - Starting gas network that you want to filter from
# '''Output''' - Filtered gas output
# '''Waste''' - Unfiltered gas from the input
 
When powered and turned on, Filtration Unit will take a specific amount (in mols) of the Input gas mixture and process it using the Filters attached. It will then separate all the gases associated with these Filters and eject them to the Output 1 pipe network, and eject the remaining gases to the Output 2 network. Filtration Unit can process greater amounts of gas over time if the Input network pressure is significantly greater than pressure in either of its ouput networks and/or the input network is cooled.
 
[[Guide (Filtration)]] provides additional information regarding the function, construction, and operation of a Filtration unit.

=Characteristics=
* It has a manual power switch.
* It consumes 10W of [[Power]] per [[Tick]] when idle and 10-110W(depending on its input pressure) when active.
* It has a separate [[Power Port]] and [[Data Port]].
* It has an on-board IC10 chip slot.
* It has a pipe port (labelled "Input") for the gas mixture from which the designated gas(es) '''will be''' filtered.
* It has a pipe port (labelled "Filtered") for the designated gas(es) that '''have been''' filtered. (This is in line with and directly opposite of the input)
* It has a pipe port (labelled "Unfiltered") for any remaining unfiltered gases. (This is to the side)
* It can filter up to 2 different gases at once by inserting two different filters.
** Inserting two of the '''same''' type of filter does not increase filtration speed.
Note: When using an I/O slot reader chip, the filter slots are labeled as slot 1, slot 2 and slot 3(IC), with 1 being the slot closer to the inlet.
When using an IC chip, the slots are labeled as slot 0, slot1 and slot 2(IC).

=User Interface=
A Filtration unit provides the following user interface:
{| class="wikitable"
|-
! Name || Type !! Function
|-
| [[Filters|Filter]] (Right) || Slot 0 || Port for a gas filter. If gas of the same type is present in the incoming mixture, it will be redirected out the "Filtered" pipe port.
|-
| Filter (Left) || Slot 1 || Another Port for a gas filter that functions the same as its twin slot. May contain the same or a different filter.
|-
| v || Slot 2 || IC10 placed in filtration unit (has 2 Input/Outputs)
|-
| On || Switch || Switches Filtration unit between turned on or turned off. (On=1/Off=0)
|-
|}

{{Data Network Header}}

{{Data Parameters}}

{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Powers on the Filtration unit on when set to 1. Powers off when set to 0.
|-
| Open || Boolean ||
|-
| Setting || Integer ||
|-
| Lock || Boolean ||
|-
| Mode || Boolean || 0: idle, 1: Active
|}

{{Data Outputs}}

{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Filtration unit is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Filtration unit IC Slot cover is open or closed. (0 for closed, 1 for open)
|-
| Mode || Boolean || Returns whether the Filtration unit is active or idle (0 for idle, 1 for Active)
|-
| Error || Boolean || Returns whether the Filtration unit is flashing an error. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Filtration unit is locked. (0 for no, 1 for yes)
|-
| Setting || Integer ||
|-
| Maximum || Integer ||
|-
| Ratio || Float ||
|-
| On || Boolean || Returns whether the Filtration unit is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power in Watts required by the Filtration unit.
|-
| PressureInput|| Float || Input pressure in kilopascals
|-
| TemperatureInput || Float || Input temperature in kelvin
|-
| RatioOxygenInput || Float || Percentage of Oxygen in input as ratio between 0 and 1
|-
| RatioCarbonDioxideInput || Float || Percentage of Carbon Dioxide in input as ratio between 0 and 1
|-
| RatioNitrogenInput || Float || Percentage of Nitrogen in input as ratio between 0 and 1
|-
| RatioPollutantInput || Float || Percentage of Pollutant in input as ratio between 0 and 1
|-
| RatioVolatilesInput || Float || Percentage of Volatiles in input as ratio between 0 and 1
|-
| RatioWaterInput || Float || Percentage of Water in input as ratio between 0 and 1
|-
| RatioNitrousOxideInput || Float || Percentage of Nitrous Oxide in input as ratio between 0 and 1
|-
| TotalMolesInput|| Float || Total quantity of gas in input measured in moles
|-
| PressureOutput|| Float || Output pressure in kilopascals
|-
| TemperatureOutput || Float || Output temperature in kelvin
|-
| RatioOxygenOutput || Float || Percentage of Oxygen in output as ratio between 0 and 1
|-
| RatioCarbonDioxideOutput || Float || Percentage of Carbon Dioxide in output as ratio between 0 and 1
|-
| RatioNitrogenOutput || Float || Percentage of Nitrogen in output as ratio between 0 and 1
|-
| RatioPollutantOutput || Float || Percentage of Pollutant in output as ratio between 0 and 1
|-
| RatioVolatilesOutput || Float || Percentage of Volatiles in output as ratio between 0 and 1
|-
| RatioWaterOutput || Float || Percentage of Water in output as ratio between 0 and 1
|-
| RatioNitrousOxideOutput || Float || Percentage of Nitrous Oxide in output as ratio between 0 and 1
|-
| TotalMolesOutput|| Float || Total quantity of gas in output measured in moles
|-
| PressureOutput2|| Float || Waste pressure in kilopascals
|-
| TemperatureOutput2 || Float || Waste temperature in kelvin
|-
| RatioOxygenOutput2 || Float || Percentage of Oxygen in waste as ratio between 0 and 1
|-
| RatioCarbonDioxideOutput2 || Float || Percentage of Carbon Dioxide in waste as ratio between 0 and 1
|-
| RatioNitrogenOutput2 || Float || Percentage of Nitrogen in waste as ratio between 0 and 1
|-
| RatioPollutantOutput2 || Float || Percentage of Pollutant in waste as ratio between 0 and 1
|-
| RatioVolatilesOutput2 || Float || Percentage of Volatiles in waste as ratio between 0 and 1
|-
| RatioWaterOutput2 || Float || Percentage of Water in waste as ratio between 0 and 1
|-
| RatioNitrousOxideOutput2 || Float || Percentage of Nitrous Oxide in waste as ratio between 0 and 1
|-
| TotalMolesOutput2 || Float || Total quantity of gas in waste measured in moles
|-
| CombustionInput || Float ||
|-
| CombustionOutput || Float ||
|-
| CombustionOutput2 || Float ||
|}


==Slot Outputs==
Slot 0 and 1 are the two gas [[filter]]s. Slot 2 is the [[Integrated Circuit (IC10)|programmable chip]]
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Occupied || Boolean || Returns whether the slot is occupied. (0 for no, 1 for yes)
|-
| OccupantHash || Integer || Returns the hash of the object in the slot.
|-
| Quantity || Integer || Returns the filter life remaining, in percent.
|-
| Damage || Integer || Returns the damage state of the item in the slot.
|-
| Class || Integer || Returns an integer representing the class of object.
|-
| MaxQuanity || Integer || Returns max stack size of the item in the slot.
|-
| PrefabHash || Integer || Returns the hash of the structure in the slot.
|}


=See Also=
* [[Guide (Filtration)]]
* [[Kit (Atmospherics)]]
* [[Kit (Portable Scrubber) Portable Scrubber|Portable Scrubber]]
</translate>

Baked potato

2025-06-19T02:42:26Z

Katree: Redirected page to Baked Potato

#REDIRECT [[Baked Potato]]

Diode Slide

2025-06-19T01:10:20Z

Katree: Created page with "{{Structurebox | name = Diode Slide | prefab_hash = 576516101 | power_usage = 25W | placed_with_item = Kit (Lights) | placed_on_grid = Small G..."

{{Structurebox
| name = Diode Slide
| prefab_hash = 576516101
| power_usage = 25W
| placed_with_item = [[Kit (Lights)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Lights)]]
}}

= Description =
An indicator light that can be controlled with a [[Kit_(Logic_I/O)#Logic_Writer|Logic Writer]], [[Kit_(Logic_I/O)#Batch_Writer|Batch Writer]], or [[Integrated Circuit (IC10)]], to show a combination of two colors in a bar. One of the colors will always be red and the other can be changed with [[Spray Paint]].

= Data Network =
{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Turns the Diode Slide on, when set to 1. Turns it off, when set to 0.
|-
| Lock || Boolean || Locks the Diode Slide when set to 1. Unlocks it, when set to 0. When locked, Light cannot be turned on\off by player.
|-
| Setting || Float || Determines the portion of the light that is red. Ranges from 0 (Entirely red) to 1.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| On || Boolean || Returns whether the Diode Slide is turned on. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Diode Slide is locked. (0 for no, 1 for yes)
|-
| Setting || Boolean || Returns the "Setting" value of the Diode Slide.
|-
| RequiredPower || Integer || Returns the current amount of power required by the Diode Slide , in watts.
|-
| PrefabHash || Integer ||
|-
| Power || Boolean || Returns whether the Diode Slide is turned on and receives power. (0 for no, 1 for yes)
|}

= See Also =
* [[Kit (Lights)]]

Kit (Lights)

2025-06-19T01:09:23Z

Katree:

Kit (Lights)

2025-06-19T01:01:41Z

Katree:

<languages />
<translate>
{{Itembox
| name = Kit (Lights)
| image = [[File:{{#setmainimage:ItemWallLight.png}}]]
| stacks = Yes
| constructs = Wall Light, LED
| createdwith = [[Autolathe]], [[Electronics Printer]], [[Fabricator]]
| cost = 1g [[Iron]], 2g [[Copper]], 1g [[silicon_Ingot|Silicon]]* *autolathe only
}}
{{Structurebox
| name = Wall Lights
| prefab_hash = See table in description
| power_usage = 50W
| placed_with_item = [[Kit (Lights)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Lights)]]
}}
{{Structurebox
| name = Diode Slide
| prefab_hash = 576516101
| power_usage = 25W
| placed_with_item = [[Kit (Lights)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Lights)]]
}}
__TOC__

= Description =
Light kits are used for illuminating your base.

This kit produces the following:

* [[Diode Slide]]
* [[LED]]
* [[Light Round]]
* [[Light Round (Angled)]]
* [[Light Round (Small)]]
* [[Wall Light]]
* [[Wall Light (Long)]]
* [[Wall Light (Wide Long)]]
* [[Wall Light (Long Angled)]]
* [[Wall Light (Battery)]]

= PrefabHash Values =
{| class="wikitable"
|-
! Light Type !! PrefabHash
|-
| Regular || -1860064656
|-
| Long || 797794350
|-
| Long Wide || 555215790
|-
| Long Angled || 1847265835
|-
| Battery Powered || -1306415132
|-
| Round || 1514476632
|-
| Round Angled || 1592905386
|-
| Small Round || 1436121888
|}

{{Data Network Header}}
{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Turns the Light on, when set to 1. Turns it off, when set to 0.
|-
| Lock || Boolean || Locks the Light when set to 1. Unlocks it, when set to 0. When locked, Light cannot be turned on\off by player.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| On || Boolean || Returns whether the Light is turned on. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Light is locked. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power required by the Light, in watts.
|-
| PrefabHash || Integer || Returns the Hash value for the selected light type. (See info panels on the right)
|-
| Power || Boolean || Returns whether the Light is turned on and receives power. (0 for no, 1 for yes)
|}

= <big>Diode Slide</big> =

An indicator light that can be controlled with a [[Kit_(Logic_I/O)#Logic_Writer|Logic Writer]], [[Kit_(Logic_I/O)#Batch_Writer|Batch Writer]], or [[Integrated Circuit (IC10)]], to show a combination of two colors in a bar. One of the colors will always be red and the other can be changed with [[Spray Paint]].

{{Data Network Header}}
{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Turns the Diode Slide on, when set to 1. Turns it off, when set to 0.
|-
| Lock || Boolean || Locks the Diode Slide when set to 1. Unlocks it, when set to 0. When locked, Light cannot be turned on\off by player.
|-
| Setting || Float || Determines the portion of the light that is red. Ranges from 0 (Entirely red) to 1.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| On || Boolean || Returns whether the Diode Slide is turned on. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Diode Slide is locked. (0 for no, 1 for yes)
|-
| Setting || Boolean || Returns the "Setting" value of the Diode Slide.
|-
| RequiredPower || Integer || Returns the current amount of power required by the Diode Slide , in watts.
|-
| PrefabHash || Integer ||
|-
| Power || Boolean || Returns whether the Diode Slide is turned on and receives power. (0 for no, 1 for yes)
|}

= Builds =

* [[Auto Night Lights]]

</translate>

LED

2025-06-19T01:00:55Z

Katree:

{{Structurebox
| name = LED
| image = [[File:LED.png]]
| prefab_hash = 1944485013
| power_usage = 25W
| placed_with_item = [[Kit (Lights)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Lights)]]
}}

= Description =
The LED variant consumes half the power of the default larger wall light though is not as bright. It's color can also be changed with logic, making for a great status indicator within logic circuits.

= Data Network =
{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Turns the Light on, when set to 1. Turns it off, when set to 0.
|-
| Lock || Boolean || Locks the Light when set to 1. Unlocks it, when set to 0. When locked, Light cannot be turned on\off by player.
|-
| Color || Integer || Sets the color of the LED Light. (See [[Data Network Colors]])
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| On || Boolean || Returns whether the Light is turned on. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Light is locked. (0 for no, 1 for yes)
|-
| Color || Integer || Returns the color setting of the LED Light. (See [[Data Network Colors]])
|-
| RequiredPower || Integer || Returns the current amount of power required by the Light, in watts.
|-
| PrefabHash || Integer ||
|-
| Power || Boolean || Returns whether the Light is turned on and receives power. (0 for no, 1 for yes)
|}

= See Also =
* [[Kit (Lights)]]

LED

2025-06-19T00:57:31Z

Katree: Remove redirect to that item information can be contained here

Wall Light (Battery)

2025-06-19T00:47:58Z

Katree: Creating new page for this item

{{Itembox
| name = Wall Light (Battery)
| image = [[File:Wall Light (Battery).jpg]]
| prefabhash = -1306415132
| prefabname = StructureWallLightBattery
}}

= Description =
A wall mountable light that contains a slot for a [[Battery Cell (Small)]]. The light still has a power connection port for a [[Cable Coil]], so the light can be powered by either the cable or the battery. The cable is also used to charge the small battery. The light can be toggled on or off by selecting it.

= See Also =
* [[Kit (Lights)]]

File:Wall Light (Battery).jpg

2025-06-19T00:45:50Z

Katree: User created page with UploadWizard

=={{int:filedesc}}==
{{Information
|description={{en|1=A wall mountable light that contains a slot for a battery}}
|date=2025-06-17
|source={{own}}
|author=[[User:Katree|Katree]]
|permission=
|other versions=
}}

=={{int:license-header}}==
{{licensing|generic}}

[[Category:Items]]

Kit (Lights)

2025-06-19T00:29:35Z

Katree:

<languages />
<translate>
{{Itembox
| name = Kit (Lights)
| image = [[File:{{#setmainimage:ItemWallLight.png}}]]
| stacks = Yes
| constructs = Wall Light, LED
| createdwith = [[Autolathe]], [[Electronics Printer]], [[Fabricator]]
| cost = 1g [[Iron]], 2g [[Copper]], 1g [[silicon_Ingot|Silicon]]* *autolathe only
}}
{{Structurebox
| name = Wall Lights
| prefab_hash = See table in description
| power_usage = 50W
| placed_with_item = [[Kit (Lights)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Lights)]]
}}
{{Structurebox
| name = LED
| image = [[File:LED.png]]
| prefab_hash = 1944485013
| power_usage = 25W
| placed_with_item = [[Kit (Lights)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Lights)]]
}}
{{Structurebox
| name = Diode Slide
| prefab_hash = 576516101
| power_usage = 25W
| placed_with_item = [[Kit (Lights)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Lights)]]
}}
__TOC__

= Description =
Light kits are used for illuminating your base.

This kit produces the following:

* [[Diode Slide]]
* [[LED]]
* [[Light Round]]
* [[Light Round (Angled)]]
* [[Light Round (Small)]]
* [[Wall Light]]
* [[Wall Light (Long)]]
* [[Wall Light (Wide Long)]]
* [[Wall Light (Long Angled)]]
* [[Wall Light (Battery)]]

= PrefabHash Values =
{| class="wikitable"
|-
! Light Type !! PrefabHash
|-
| Regular || -1860064656
|-
| Long || 797794350
|-
| Long Wide || 555215790
|-
| Long Angled || 1847265835
|-
| Battery Powered || -1306415132
|-
| Round || 1514476632
|-
| Round Angled || 1592905386
|-
| Small Round || 1436121888
|}

{{Data Network Header}}
{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Turns the Light on, when set to 1. Turns it off, when set to 0.
|-
| Lock || Boolean || Locks the Light when set to 1. Unlocks it, when set to 0. When locked, Light cannot be turned on\off by player.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| On || Boolean || Returns whether the Light is turned on. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Light is locked. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power required by the Light, in watts.
|-
| PrefabHash || Integer || Returns the Hash value for the selected light type. (See info panels on the right)
|-
| Power || Boolean || Returns whether the Light is turned on and receives power. (0 for no, 1 for yes)
|}

= <big>LED</big> =
{{Data Network Header}}
{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Turns the Light on, when set to 1. Turns it off, when set to 0.
|-
| Lock || Boolean || Locks the Light when set to 1. Unlocks it, when set to 0. When locked, Light cannot be turned on\off by player.
|-
| Color || Integer || Sets the color of the LED Light. (See [[Data Network Colors]])
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| On || Boolean || Returns whether the Light is turned on. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Light is locked. (0 for no, 1 for yes)
|-
| Color || Integer || Returns the color setting of the LED Light. (See [[Data Network Colors]])
|-
| RequiredPower || Integer || Returns the current amount of power required by the Light, in watts.
|-
| PrefabHash || Integer ||
|-
| Power || Boolean || Returns whether the Light is turned on and receives power. (0 for no, 1 for yes)
|}

= <big>Diode Slide</big> =

An indicator light that can be controlled with a [[Kit_(Logic_I/O)#Logic_Writer|Logic Writer]], [[Kit_(Logic_I/O)#Batch_Writer|Batch Writer]], or [[Integrated Circuit (IC10)]], to show a combination of two colors in a bar. One of the colors will always be red and the other can be changed with [[Spray Paint]].

{{Data Network Header}}
{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On || Boolean || Turns the Diode Slide on, when set to 1. Turns it off, when set to 0.
|-
| Lock || Boolean || Locks the Diode Slide when set to 1. Unlocks it, when set to 0. When locked, Light cannot be turned on\off by player.
|-
| Setting || Float || Determines the portion of the light that is red. Ranges from 0 (Entirely red) to 1.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| On || Boolean || Returns whether the Diode Slide is turned on. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Diode Slide is locked. (0 for no, 1 for yes)
|-
| Setting || Boolean || Returns the "Setting" value of the Diode Slide.
|-
| RequiredPower || Integer || Returns the current amount of power required by the Diode Slide , in watts.
|-
| PrefabHash || Integer ||
|-
| Power || Boolean || Returns whether the Diode Slide is turned on and receives power. (0 for no, 1 for yes)
|}

= Builds =

* [[Auto Night Lights]]

</translate>

Power

2025-01-25T03:42:33Z

Katree: Adding power category

[[Category:Power]]
==Description==
Power is one of the main resources, and is exchanged and used for every [[Tick]].

Note, power in Watts [W] and energy in Joule [J] terminology are mistakenly mixed by the developers.
Power storage should be expressed in Joule, but is expressed in Watts instead. (Watt hours...)
To bypass this confusion, just think of Watts as a piece of energy, which is transferred or used every tick.
In the case some actual power is mentioned (flow of energy), like for cables, this is expressed as energy per [[Tick]], which is (also) expressed as Watts.

So in summary, the energy contained in batteries, as energy being transferred, are both in-game mentioned as Watts.
We try to make the distinction in this Wiki by using Juoles for the energy contained instead.

==Actual Power, and Power Potential==
A power network is a series of connected Cables and the individual machines connected to it.
Each network has two main metrics - Actual Power, and Power Potential.
*Actual power is the active draw, or usage, of power from machines on the network.
*The Power Potential of the network is the currently accessible potential of power that could be drawn from the network. As such, the Actual Power can never exceed the Power Potential, if more power is needed by machines, you effectively have a shortage, and a cable will fry resulting in burned cables. Sometimes the Power Potential is buffered in batteries, in which case it is saved for later, but in the case of power generation - Power Potential that isn't used will be effectively lost.

This [https://www.reddit.com/r/Stationeers/comments/hoku8r/really_useful_cheat_sheet_of_stats_and_figures/ reddit post by u/Chribitz] details power usage rates of most, if not all, machines/components/tools that use it.

==Cables and Fuses==
Individual types of cable have a maximum Actual Power limit (Normal: 5kW, Heavy: 100kW), the Potential Power can be as high as you want, but if the Actual Power draw from the network exceeds the capacity of the cable, one or more cables on the network will blow. In order to avoid random cables blowing, you can add a [[Fuse]] to the power network. Once the power limit is exceeded, the fuse on the network will blow instead of random pieces of cable on the network making it a very easy problem to fix instead of having to hunt around large networks trying to find the issue.

==Limiting Power==
You can also limit the amount of power in a circuit by using a [[Transformer]]. The Small Transformer is perfect for protecting basic cables because it can limit up to 5 kW. The power draw cannot exceed the limit set on the transformer, so the cable will never blow. It's a good idea to use a transformer any time you switch from heavy to standard cables.

Gas Fuel Generator

2025-01-25T03:41:07Z

Katree: Adding power category

[[Category:Power]]
<languages/>
<translate>


{{Structurebox
| name = Gas Fuel Generator
| image = [[File:Gas generator front.png]]
| prefab_hash = 1165997963
| prefab_name = StructureGasGenerator
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| placed_with_item = [[Kit (Gas Fuel Generator)]]
| item_rec1 = [[Kit (Gas Fuel Generator)]]
}}

== Description == 
As the big brother of the [[Portable Generator]] the Gas Generator requires [[fuel]] and outputs crazy amounts of power if you don't throttle its gas input.

== Notes == 
* Power generation (as well as heat generated) scales with the amount of fuel available in the input pipe, up to a limit defined by the mix of gases used. This is determined by the moles of gas available in the input, not the absolute pressure.
** With a standard fuel mix (33/67 O/H2) can generate up to 14kW. With NOS fuel mix (50/50 N2O/H2) this rises to 98kW with a volume of 99kpa.
* Use a pressure regulator on the input is recommended. It should generally be set very low at first (potentially as low as as '''0.1kpa''', using a [[Labeller]] to enter decimal values), since it can be difficult to keep cool when run at full power.
* Recommended to connect to a [[Kit (Battery)]] and to automate it as backup power.
* Can be used in conjunction with a [[Atmospherics#Electrolyzer |Electrolyzer]] to generate its fuel.
* The output is a gas mix of CO2, [[Pollutant]]s, and tiny amounts of uncombusted fuel. It is not water, as would be implied by its compatibility with the Electrolyzer.
* Requires to be placed in an atmosphere to work. Minimum pressure of 20 kPA and temperature ranging between 278-328 degrees Kelvin (5-55 Celsius)
** If the surrounding atmosphere is absent, of insufficient pressure, or outside of the necessary temperature range, the generator will run for one tick and then automatically turn itself off. Since it does still produce power during that tick, the generator can be used in a complete vacuum at approximately half the maximum power output (since approximately every other tick it is turned off), but without any need to temperature regulate the surroundings, by using logic chips or an IC10 to force it to turn on again any time it is off. A battery or other power storage system is required to ensure the logic circuitry remains powered even after the generator shuts itself off
* Due to the magnitude of power generated, especially when using NOS fuel, heavy power cables are functionally required. If using multiple generators and/or NOS fuel while outputting to batteries, it is recommended to place 1 or 2 [[Transformer|Large Transformers]] between the generator(s) and the batteries to avoid burning out even heavy cable. Two large transformers set just below their maximum setting will prevent the batteries from drawing enough power from the generators to burn out the heavy cables.
* The generator has an internal volume of 10L.

== Videos == 

== Simple Overview ==
[https://youtu.be/2zMG96J3prw Stationeers 98Kw Gas fuel generator]

== Data Network Properties == 
These are all [[:Category:Data Network|Data Network]] properties of this device.

=== Data Parameters ===
These are all parameters, that can be written to with a [[Kit_(Logic_I/O)#Logic_Writer|Logic Writer]] or a [[Kit_(Logic_I/O)#Batch_Writer|Batch Writer]]. The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Setting || Float || (Unknown) Affects the Setting output.
|-
| On || Boolean || Turns the Gas Generator on, when set to 1. Turns it off, when set to 0.
|}

=== Data Outputs ===
These are all parameters, that can be read with a [[Kit_(Logic_I/O)#Logic_Reader|Logic Reader]]. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Gas Generator is turned on and receives power. (0 for no, 1 for yes)
|-
| Error || Boolean || Returns whether the Gas Generator is flashing an error. (0 for no, 1 for yes)
|-
| Pressure || Float || Returns the pressure in the Gas Generator in kilo pascal.
|-
| Temperature || Float || Returns the temperature in the Gas Generator in kelvin.
|-
| Setting || Float || (Unknown) Affected by the Setting parameter.
|-
| RatioOxygen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Gas Generator.
|-
| RatioCarbonDioxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Gas Generator.
|-
| RatioNitrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Gas Generator.
|-
| RatioPollutant || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Gas Generator.
|-
| RatioVolatiles || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Gas Generator.
|-
| RatioWater || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Gas Generator.
|-
| RatioNitrousOxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrous oxide in the Gas Generator.
|-
| RatioLiquidNitrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid nitrogen in the Gas Generator.
|-
| RatioLiquidOxygen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid oxygen in the Gas Generator.
|-
| RatioLiquidVolatiles || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid volatiles in the Gas Generator.
|-
| RatioSteam || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of steam in the Gas Generator.
|-
| RatioLiquidCarbonDioxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid carbon dioxide in the Gas Generator.
|-
| RatioLiquidPollutant || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid pollutant in the Gas Generator.
|-
| RatioLiquidNitrousOxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid nitrous oxide in the Gas Generator.
|-
| RatioHydrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of hydrogen in the Gas Generator.
|-
| RatioLiquidHydrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid hydrogen in the Gas Generator.
|-
| RatioPollutedWater || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of polluted water in the Gas Generator.
|-
| Maximum || Integer || (Unknown) Returns 100.
|-
| Ratio || Float || (Unknown) Returns 0.5.
|-
| On || Boolean || Returns whether the Gas Generator is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Float || ???
|-
| PowerGeneration || Float || Returns power production
|-
| TotalMoles || Interger || Returns total amount of fuel in moles
|-
| PrefabHash || ||
|-
| Combustion || ||
|-
|}

</translate>

Kit (Gas Fuel Generator)

2025-01-25T03:40:37Z

Katree: Undo revision 22400 by Katree (talk)

<languages/>
<translate>


{{Itembox
| name = Kit (Gas Fuel Generator)
| image = [[File:ItemKitGasGenerator.png]]
| prefabhash = 377745425
| prefabname = ItemKitGasGenerator
| stacks = 1
| recipe_machine1 = Electronics Printer
| recipe_cost1 = 50g [[Iron]], 10g [[Copper]]
| constructs = [[Gas Fuel Generator]]
}}
{{Structurebox
| name = Gas Fuel Generator
| image = [[File:Gas generator front.png]]
| prefab_hash = 1165997963
| prefab_name = StructureGasGenerator
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| placed_with_item = [[Kit (Gas Fuel Generator)]]
| item_rec1 = [[Kit (Gas Fuel Generator)]]
}}

== Description == 
As the big brother of the [[Portable Generator]] the Gas Generator requires [[fuel]] and outputs crazy amounts of power if you don't throttle its gas input.

== Notes == 
* Power generation (as well as heat generated) scales with the amount of fuel available in the input pipe, up to a limit defined by the mix of gases used. This is determined by the moles of gas available in the input, not the absolute pressure.
** With a standard fuel mix (33/67 O/H2) can generate up to 14kW. With NOS fuel mix (50/50 N2O/H2) this rises to 98kW with a volume of 99kpa.
* Use a pressure regulator on the input is recommended. It should generally be set very low at first (potentially as low as as '''0.1kpa''', using a [[Labeller]] to enter decimal values), since it can be difficult to keep cool when run at full power.
* Recommended to connect to a [[Kit (Battery)]] and to automate it as backup power.
* Can be used in conjunction with a [[Atmospherics#Electrolyzer |Electrolyzer]] to generate its fuel.
* The output is a gas mix of CO2, [[Pollutant]]s, and tiny amounts of uncombusted fuel. It is not water, as would be implied by its compatibility with the Electrolyzer.
* Requires to be placed in an atmosphere to work. Minimum pressure of 20 kPA and temperature ranging between 278-328 degrees Kelvin (5-55 Celsius)
** If the surrounding atmosphere is absent, of insufficient pressure, or outside of the necessary temperature range, the generator will run for one tick and then automatically turn itself off. Since it does still produce power during that tick, the generator can be used in a complete vacuum at approximately half the maximum power output (since approximately every other tick it is turned off), but without any need to temperature regulate the surroundings, by using logic chips or an IC10 to force it to turn on again any time it is off. A battery or other power storage system is required to ensure the logic circuitry remains powered even after the generator shuts itself off
* Due to the magnitude of power generated, especially when using NOS fuel, heavy power cables are functionally required. If using multiple generators and/or NOS fuel while outputting to batteries, it is recommended to place 1 or 2 [[Transformer|Large Transformers]] between the generator(s) and the batteries to avoid burning out even heavy cable. Two large transformers set just below their maximum setting will prevent the batteries from drawing enough power from the generators to burn out the heavy cables.
* The generator has an internal volume of 10L.

== Videos == 

== Simple Overview ==
[https://youtu.be/2zMG96J3prw Stationeers 98Kw Gas fuel generator]

== Data Network Properties == 
These are all [[:Category:Data Network|Data Network]] properties of this device.

=== Data Parameters ===
These are all parameters, that can be written to with a [[Kit_(Logic_I/O)#Logic_Writer|Logic Writer]] or a [[Kit_(Logic_I/O)#Batch_Writer|Batch Writer]]. The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Setting || Float || (Unknown) Affects the Setting output.
|-
| On || Boolean || Turns the Gas Generator on, when set to 1. Turns it off, when set to 0.
|}

=== Data Outputs ===
These are all parameters, that can be read with a [[Kit_(Logic_I/O)#Logic_Reader|Logic Reader]]. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Gas Generator is turned on and receives power. (0 for no, 1 for yes)
|-
| Error || Boolean || Returns whether the Gas Generator is flashing an error. (0 for no, 1 for yes)
|-
| Pressure || Float || Returns the pressure in the Gas Generator in kilo pascal.
|-
| Temperature || Float || Returns the temperature in the Gas Generator in kelvin.
|-
| Setting || Float || (Unknown) Affected by the Setting parameter.
|-
| RatioOxygen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Gas Generator.
|-
| RatioCarbonDioxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Gas Generator.
|-
| RatioNitrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Gas Generator.
|-
| RatioPollutant || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Gas Generator.
|-
| RatioVolatiles || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Gas Generator.
|-
| RatioWater || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Gas Generator.
|-
| RatioNitrousOxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrous oxide in the Gas Generator.
|-
| RatioLiquidNitrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid nitrogen in the Gas Generator.
|-
| RatioLiquidOxygen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid oxygen in the Gas Generator.
|-
| RatioLiquidVolatiles || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid volatiles in the Gas Generator.
|-
| RatioSteam || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of steam in the Gas Generator.
|-
| RatioLiquidCarbonDioxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid carbon dioxide in the Gas Generator.
|-
| RatioLiquidPollutant || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid pollutant in the Gas Generator.
|-
| RatioLiquidNitrousOxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid nitrous oxide in the Gas Generator.
|-
| RatioHydrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of hydrogen in the Gas Generator.
|-
| RatioLiquidHydrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid hydrogen in the Gas Generator.
|-
| RatioPollutedWater || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of polluted water in the Gas Generator.
|-
| Maximum || Integer || (Unknown) Returns 100.
|-
| Ratio || Float || (Unknown) Returns 0.5.
|-
| On || Boolean || Returns whether the Gas Generator is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Float || ???
|-
| PowerGeneration || Float || Returns power production
|-
| TotalMoles || Interger || Returns total amount of fuel in moles
|-
| PrefabHash || ||
|-
| Combustion || ||
|-
|}

</translate>

Kit (Gas Fuel Generator)

2025-01-25T03:39:33Z

Katree: Adding power category

[[Category:Power]]
<languages/>
<translate>


{{Itembox
| name = Kit (Gas Fuel Generator)
| image = [[File:ItemKitGasGenerator.png]]
| prefabhash = 377745425
| prefabname = ItemKitGasGenerator
| stacks = 1
| recipe_machine1 = Electronics Printer
| recipe_cost1 = 50g [[Iron]], 10g [[Copper]]
| constructs = [[Gas Fuel Generator]]
}}
{{Structurebox
| name = Gas Fuel Generator
| image = [[File:Gas generator front.png]]
| prefab_hash = 1165997963
| prefab_name = StructureGasGenerator
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| placed_with_item = [[Kit (Gas Fuel Generator)]]
| item_rec1 = [[Kit (Gas Fuel Generator)]]
}}

== Description == 
As the big brother of the [[Portable Generator]] the Gas Generator requires [[fuel]] and outputs crazy amounts of power if you don't throttle its gas input.

== Notes == 
* Power generation (as well as heat generated) scales with the amount of fuel available in the input pipe, up to a limit defined by the mix of gases used. This is determined by the moles of gas available in the input, not the absolute pressure.
** With a standard fuel mix (33/67 O/H2) can generate up to 14kW. With NOS fuel mix (50/50 N2O/H2) this rises to 98kW with a volume of 99kpa.
* Use a pressure regulator on the input is recommended. It should generally be set very low at first (potentially as low as as '''0.1kpa''', using a [[Labeller]] to enter decimal values), since it can be difficult to keep cool when run at full power.
* Recommended to connect to a [[Kit (Battery)]] and to automate it as backup power.
* Can be used in conjunction with a [[Atmospherics#Electrolyzer |Electrolyzer]] to generate its fuel.
* The output is a gas mix of CO2, [[Pollutant]]s, and tiny amounts of uncombusted fuel. It is not water, as would be implied by its compatibility with the Electrolyzer.
* Requires to be placed in an atmosphere to work. Minimum pressure of 20 kPA and temperature ranging between 278-328 degrees Kelvin (5-55 Celsius)
** If the surrounding atmosphere is absent, of insufficient pressure, or outside of the necessary temperature range, the generator will run for one tick and then automatically turn itself off. Since it does still produce power during that tick, the generator can be used in a complete vacuum at approximately half the maximum power output (since approximately every other tick it is turned off), but without any need to temperature regulate the surroundings, by using logic chips or an IC10 to force it to turn on again any time it is off. A battery or other power storage system is required to ensure the logic circuitry remains powered even after the generator shuts itself off
* Due to the magnitude of power generated, especially when using NOS fuel, heavy power cables are functionally required. If using multiple generators and/or NOS fuel while outputting to batteries, it is recommended to place 1 or 2 [[Transformer|Large Transformers]] between the generator(s) and the batteries to avoid burning out even heavy cable. Two large transformers set just below their maximum setting will prevent the batteries from drawing enough power from the generators to burn out the heavy cables.
* The generator has an internal volume of 10L.

== Videos == 

== Simple Overview ==
[https://youtu.be/2zMG96J3prw Stationeers 98Kw Gas fuel generator]

== Data Network Properties == 
These are all [[:Category:Data Network|Data Network]] properties of this device.

=== Data Parameters ===
These are all parameters, that can be written to with a [[Kit_(Logic_I/O)#Logic_Writer|Logic Writer]] or a [[Kit_(Logic_I/O)#Batch_Writer|Batch Writer]]. The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Setting || Float || (Unknown) Affects the Setting output.
|-
| On || Boolean || Turns the Gas Generator on, when set to 1. Turns it off, when set to 0.
|}

=== Data Outputs ===
These are all parameters, that can be read with a [[Kit_(Logic_I/O)#Logic_Reader|Logic Reader]]. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Gas Generator is turned on and receives power. (0 for no, 1 for yes)
|-
| Error || Boolean || Returns whether the Gas Generator is flashing an error. (0 for no, 1 for yes)
|-
| Pressure || Float || Returns the pressure in the Gas Generator in kilo pascal.
|-
| Temperature || Float || Returns the temperature in the Gas Generator in kelvin.
|-
| Setting || Float || (Unknown) Affected by the Setting parameter.
|-
| RatioOxygen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Gas Generator.
|-
| RatioCarbonDioxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Gas Generator.
|-
| RatioNitrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Gas Generator.
|-
| RatioPollutant || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Gas Generator.
|-
| RatioVolatiles || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Gas Generator.
|-
| RatioWater || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Gas Generator.
|-
| RatioNitrousOxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrous oxide in the Gas Generator.
|-
| RatioLiquidNitrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid nitrogen in the Gas Generator.
|-
| RatioLiquidOxygen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid oxygen in the Gas Generator.
|-
| RatioLiquidVolatiles || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid volatiles in the Gas Generator.
|-
| RatioSteam || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of steam in the Gas Generator.
|-
| RatioLiquidCarbonDioxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid carbon dioxide in the Gas Generator.
|-
| RatioLiquidPollutant || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid pollutant in the Gas Generator.
|-
| RatioLiquidNitrousOxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid nitrous oxide in the Gas Generator.
|-
| RatioHydrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of hydrogen in the Gas Generator.
|-
| RatioLiquidHydrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of liquid hydrogen in the Gas Generator.
|-
| RatioPollutedWater || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of polluted water in the Gas Generator.
|-
| Maximum || Integer || (Unknown) Returns 100.
|-
| Ratio || Float || (Unknown) Returns 0.5.
|-
| On || Boolean || Returns whether the Gas Generator is turned on. (0 for no, 1 for yes)
|-
| RequiredPower || Float || ???
|-
| PowerGeneration || Float || Returns power production
|-
| TotalMoles || Interger || Returns total amount of fuel in moles
|-
| PrefabHash || ||
|-
| Combustion || ||
|-
|}

</translate>

Cables

2025-01-25T03:36:15Z

Katree: Adding power category

[[Category:Power]]
<languages />
<translate>

{{Itembox
| name = Cable Coil
| image = [[File:ItemCableCoil.png]]
| prefabhash = -466050668
| prefabname = ItemCableCoil
| stacks = 50
| slot_class = SlotClass.Tool
| sorting_class = SortingClass.Resources
| recipe_machine1 = Autolathe
| recipe_cost1 = 0.5g [[Copper]]
| recipe_machine2 = Electronics Printer
| recipe_cost2 = 0.5g [[Copper]]
| constructs = 8 variants
}}
{{Itembox
| name = Cable Coil (Heavy)
| image = [[File:ItemCableCoilHeavy.png]]
| prefabhash = 2060134443
| prefabname = ItemCableCoilHeavy
| stacks = 50
| slot_class = SlotClass.Tool
| sorting_class = SortingClass.Resources
| recipe_machine1 = Electronics Printer
| recipe_cost1 = 0.5g [[Gold]], 0.5g [[Copper]]
| constructs = 8 variants
}}
{{Structurebox
| name = Cable
| image = [[File:Cable_straight.jpg]]
| other = Handles up to 5kW of power
| placed_with_item = [[Cable Coil]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wire Cutters]]
| item_rec1 = [[Cable Coil]]
}}
{{Structurebox
| name = Heavy Cable
| image = [[Image:Straight heavy.png]]
| other = Handles up to 100kW of power
| placed_with_item = [[Cable Coil (Heavy)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wire Cutters]]
| item_rec1 = [[Cable Coil (Heavy)]]
}}

== Description == 
[[Cables]] connect power and data to various machines and electronics. Different cable types can handle to a different maximum of wattage before it will fry:
* Normal: 5 kW
* Heavy: 100 kW

== Cable Networks == 
Interconnected cables create networks. Devices connected to a network can draw [[Power]] or connect with [[Data]], as long as the device is connected with the respective power or data port.

==Variations== 
Can be painted individually or by the stack with [[Spray Can]]. (consumes a single 'use' of the can either way, far more efficient to paint a full stack)

Cable Coil:
<gallery mode='traditional'>
Image:Cable_straight.jpg|Straight
Image:Cable_corner.jpg| Corner
Image:Cable_junction.jpg| Junction
Image:Cable_four_way.jpg| 4-Way Junction
Image:5-way junction.png|thumb|5-Way Junction
Image:Cable_six_way.jpg| 6-Way Junction
Image:Cable_corner_three.jpg| 3-Way Corner
File:4-way junction.png|4-Way Corner
</gallery>
Heavy Cable Coil:
<gallery mode='traditional'>
Image:Straight heavy.png|thumb|Straight
Image:Corner heavy.png|thumb|Corner
Image:3-way junction heavy.png|thumb|Junction
Image:4-way junction heavy.png|thumb|4-Way Junction
Image:5-way junction heavy.png|thumb|5-Way Junction
Image:6-way junction heavy.png|thumb|6-Way Junction
Image:3-way corner heavy.png|3-Way Corner
Image:4-way corner heavy.png|thumb|4-Way Corner
</gallery>
</translate>

Transformer

2025-01-25T03:34:14Z

Katree: Adding power category

[[Category:Power]]
{{Itembox
| name = Kit (Transformer)
| image = [[File:{{#setmainimage:ItemKitTransformerSmall.png}}]]
| stacks = No
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 10x [[Iron]], 1x [[Gold]] , 3x [[Copper]]
}}
{{Itembox
| name = Kit Transformer (Large)
| image = [[File:{{#setmainimage:ItemKitTransformer.png}}]]
| stacks = No
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 10x [[Steel]], 5x [[Electrum]]
}}

==Description==
The transformer is used to control the maximum amount of power that will flow on a cable, preventing the cables from overloading on high power draw.
There are three variants of the transformer:

The Transformer (Small) requires 1x Kit (Transformer) to place and is limited to 5,000 W of output. It can be placed in any orientation on a supporting surface (floor, wall, or ceiling) and is available as Transformer Reversed (Small).

The Transformer (Medium) requires 3x Kit (Transformer) to place and is limited to 25,000 W of output. Similarly, it can be placed on any floor, wall, or ceiling and is available as a Transformer Reversed (Medium).

The Transformer (Large) requires 1x Kit Transformer (Large) to place and is limited to 50,000 W of output. It can only be placed in one orientation, ideally the floor, but it can be stacked above floor level by placing it partway into a frame.

==Usage==
Given that the transformer can limit power very specifically (with large 100 W increments or small 10 W increments), you can control or stop the output line from drawing more than the transformer gives out. This can be used to control many items that don't have a changing power usage, such as lights, volume pumps, pipe regulators, active vents, and more. This is similar to the [[Area Power Controller]] but does not have a battery buffer.

==Notes==
Data will not flow through a transformer, isolating the circuit behind their input. 
The transformers seem to generate a large amount of heat. 

The Transformer will use 10W itself(all sizes), so setting a small transformer to 5000 and feeding with a regular cable will cause the supply cable to blow as it can draw 5010W at max load

===Data Network Properties===
These are all Data Network properties of this device. This list is not tested at all for the Transformer Small and not complete for Transformer (kit/large variant).

==Data Parameters==
These are all parameters, that can be written to with a Logic Writer, Batch Writer, or Integrated Circuit (IC10). The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.
{| class="wikitable"
|-
! Header text !! Header text !! Header text
|-
| On || Boolean || Turns the Transformer on when set to 1. Turns it off when set to 0.
|-
| Lock || Boolean || Locks the Transformer when set to 1. Unlocks it when set to 0
|-
| Setting || Integer || Sets the Transformer's power (in Watts) limit.
|}

==Data Outputs==
These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them. You cannot read ratios in IC2 chip (so far)
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On|| Boolean|| Returns whether the Transformer is turned on. (0 for no, 1 for yes)
|-
| Maximum || Integer|| Maximum setting of this device. (How high the device can be set, see description for specific numbers.)
|-
| Lock || Boolean|| Returns whether the Transformer is locked. (0 for no, 1 for yes)
|-
| Error || Boolean|| 1 if device is in error state, otherwise 0.
|-
| Setting || Integer || Returns the current power limit (in Watts) of the Transformer.
|-
| RequiredPower || Integer || Idle operating power quantity. (how much power, in watts, the device itself is using, rather than how much power it is passing through.)
|-
| Ratio || Float || Ratio of the current power limit to the maximum power limit of the device
|-
| PrefabHash|| Integer || The hash of the device. (Can be found in the Stationpedia.)
|-
| Power|| Boolean || Returns 1 if the device is powered and on, otherwise 0.
|}

Battery Cell

2025-01-25T03:32:46Z

Katree: Adding power category

[[Category:Power]]
<languages />
__NOTOC__
== Description == 
The battery cells are used in many items and tools. Aside from energy capacity, they are interchangeable in all uses. Small cells will be depleted quite rapidly in certain items/tools, such as a suit, portable A/C, or [[Arc Welder]], however, due to their small energy capacity. Other tools, such as the [[Labeller]] and [[Laptop]], consume very little power and can be run off of even small cells for extended periods.
[[Battery Wireless Cell|Wireless cells]] are also available.

=== Battery Cell (Small) === 
{{Itembox
| name = Battery Cell (Small)
| image = [[File:ItemBatteryCell.png]]
| prefabhash = 700133157
| prefabname = ItemBatteryCell
| stacks = 1
| slot_class = SlotClass.Battery
| sorting_class = SortingClass.Default
| recipe_machine1 = Electronics Printer
| recipe_cost1 = 2g [[Iron]], 2g [[Gold]], 5g [[Copper]]
}}


* You can make small cells without Steel.
* They have a power capacity of 36,000J (10 Wh).

=== Battery Cell (Large) === 
{{Itembox
| name = Battery Cell (Large)
| image = [[File:ItemBatteryCellLarge.png]]
| prefabhash = -459827268
| prefabname = ItemBatteryCellLarge
| stacks = 1
| slot_class = SlotClass.Battery
| sorting_class = SortingClass.Default
| recipe_machine1 = Electronics Printer
| recipe_cost1 = 5g [[Gold]], 10g [[Copper]], 5g [[Steel]]
}}

* Large cells require Steel.
* They have a capacity of 288,000J (80 Wh).

=== Battery Cell (Nuclear) === 
{{Itembox
| name = Battery Cell (Nuclear)
| image = [[File:ItemBatteryCellNuclear.png]]
| prefabhash = 544617306
| prefabname = ItemBatteryCellNuclear
| stacks = 1
| slot_class = SlotClass.Battery
| sorting_class = SortingClass.Default
| recipe_machine1 = Electronics Printer (Tier Two)
| recipe_cost1 = 5g [[Steel]], 5g [[Inconel]], 10g [[Astroloy]]
}}

* Nuclear cells require Steel, Inconel & Astroloy
* They have a capacity of 2,304,000J (640 Wh).

== See Also ==
* [[Battery Wireless Cell]]
* [[Battery Charger]]
* [[Battery Charger Small]]

Portable Generator

2025-01-25T03:30:53Z

Katree: Adding power category

[[Category:Power]]
{{Itembox
| image = [[File:DynamicGenerator.png]]
| name = Portable Generator
| createdwith = [[Electronics Printer]]
| cost = 10g [[Iron]], 2g [[Gold]], 5g [[Copper]]
}}

==Description==
A portable machine used to charge [[Battery Cell]]s using [[Fuel|fuel]]. It can be attached to a [[Power Connector]] to supply power to a grid.

==Use==
Insert a [[Gas Canister|canister]] of [[Fuel|fuel]] into the slot on the left side. Insert battery in the slot above the power switch and hit the switch.

== Recipes ==

Since it consumes pressure, you can increase the output by supercooling it. Also the fuel mix ratio matters.

{| class="wikitable sortable"
|-
! Fuel mix ratio !! Temperature !! Power output
|-
| 25% O2 + 75% H2 || 20 °C || 235 W
|-
| 34% O2 + 66% H2 || 20 °C || 310 W
|-
| 25% O2 + 75% H2 || -36.4 °C || 291 W
|-
| 25% O2 + 75% H2 || -54.9 °C || 315 W
|-
| 25% O2 + 75% H2 || -99 °C || 395 W
|-
| 34% O2 + 66% H2 || -99 °C || 522 W
|-
| 34% O2 + 66% H2 || -271.7 °C || 60.9 KW
|}

Solar Panel

2025-01-25T03:29:49Z

Katree:

[[Category:Solar power]] [[Category:Power]]
<languages/>
<translate>


[[Category:Machines]]
[[Category:Items]]
{{Itembox
| name = Kit (Solar Panel Basic)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]]
| cost = 10g [[Iron]], 2g [[Gold]], 10g [[Copper]]
| constructs = [[Solar Panel (Flat)]], [[Solar Panel (Angled)]]
| stacks = 5
| prefabhash = 844961456
| prefabname = ItemKitSolarPanelBasic
}}
{{Itembox
| name = Kit (Solar Panel)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]]
| cost = 5g [[Gold]], 20g [[Copper]], 15g [[Steel]]
| constructs = [[Solar Panel (Dual)]], [[Solar Panel]]
| stacks = 5
| prefabhash = -1924492105
| prefabname = ItemKitSolarPanel
}}
{{Itembox
| name = Kit (Solar Panel Basic Heavy)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]] (Tier Two)
| cost = 10g [[Copper]], 10g [[Steel]], 2g [[Electrum]], 10g [[Invar]]
| constructs = [[Solar Panel (Heavy Flat)]], [[Solar Panel (Heavy Angled)]]
| stacks = 5
| prefabhash = -528695432
| prefabname = x
}}
{{Itembox
| name = Kit (Solar Panel Heavy)
| image = [[File:ItemKitSolarPanel.png]]
| createdwith = [[Electronics Printer]] (Tier Two)
| cost = 20g [[Copper]], 10g [[Steel]], 5g [[Electrum]], 15g [[Astroloy]]
| constructs = [[Solar Panel (Heavy Dual)]], [[Solar Panel (Heavy)]]
| stacks = 5
| prefabhash = -364868685
| prefabname = x
}}
{{Structurebox
| name = Solar Panel
| power_usage = 0W to 500W generated
| placed_with_item = [[Kit (Solar Panel)]]
| placed_on_grid = Large Grid
| const_with_item1 = [[Glass Sheets|Glass Sheet]]
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Solar Panel)]]
| decon_with_tool2 = [[Crowbar]]
| item_rec2 = [[Glass Sheets|Glass Sheet]]
| prefab_hash = -2045627372
| prefab_name = StructureSolarPanel
}}
{{Structurebox
| name = Solar Panel (Dual)
| power_usage = 0W to 500W generated
| placed_with_item = [[Kit (Solar Panel)]]
| placed_on_grid = Large Grid
| const_with_item1 = [[Glass Sheets|Glass Sheet]]
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Solar Panel)]]
| decon_with_tool2 = [[Crowbar]]
| item_rec2 = [[Glass Sheets|Glass Sheet]]
| prefab_hash = -539224550
| prefab_name = StructureSolarPanelDual
}}

== Description == 
The '''Solar Panel''' generates power by absorbing sunlight, depending on solar intensity, up to 500W per panel on the moon. Can be manually rotated using a [[Wrench]]. Can be built in two configurations, one with opposite side split power/data ports, or two with same side combined power/data ports.

Data ports can interact with [https://stationeers-wiki.com/Sensors#Daylight_Sensor Daylight Sensors] and [[Kit (Logic I/O)|logic i/o writers or batch writers]] to automatically rotate the panel to face the sun.

At the extreme attitude settings (0/100) the solar panel still faces 15 degrees above the horizon. Thus the total arc of vertical rotation is only 150 degrees from input values 0-100.

Can also be destroyed by [[Storm|storms]], or left with very little health. Best course of action is to remove the solar panels when you are notified of a [[storm]] by a [[Weather Station]], Which allows you to replace them once the [[storm]] is over.

They can be repaired with [[Duct Tape]], or by dissembling them and reassembling them. You could even cover them with windows to protect them from [[Storm|storms]] at the cost of some efficiency of the panels themselves being lost. And Heavy Solar Panels are a more expensive version that do not take [[storm]] damage but it is debatable if its worth making the tier 2 metal [[Astroloy]] to prevent [[storm]] damage whilst retaining maximum efficiency.

== Types of Solar Panel Kit == 
=== Printed with the Electronics Printer (Tier One) ===
These are useful early on when resources are limited.
*'''Kit (Solar Panel Basic)''' don't have logic inputs so they can't be set up to automatically track the sun and spend most of their time at reduced power output.
*'''Kit (Solar Panels)''' have logic inputs and can be [[Solar Logic Circuits Guide|programmed to track the sun]] for optimal power output.

=== Printed with the Electronics Printer (Tier Two) ===
These are protected against [[Storm|storm]] damage, but more expensive. Note that not all planets have storms.
*'''Kit (Solar Panel Basic Heavy)''' don't have logic inputs.
*'''Kit (Solar Panel Heavy)''' have logic inputs.

== Positioning == 

Pay close attention to the positioning of your solar panel since their automation will depend heavily on it.
Most user-made scripts and guides orient the panels with the data port facing sunset and the power port facing sunrise.

[[File:Solar panel yaw-Horizontal setting.png|400x300px|solar panel horizontal rotation]]

==Notes== 
After placement be sure to install one [[Glass Sheets|Glass Sheet]] to make it functional.

See [[Sensors]] and [[Solar_Logic_Circuits_Guide]] for panel automation using logic circuits.

==Power output of a single Solar Panel on different planets==
{| class="wikitable"
|-
! World !! Solar Energy !! % of Earth !! Solar Angle
|-
| [[Worlds#Moon|Moon]] || 500W || 100% || 0°
|-
| [[Worlds#Mars|Mars]] || 455W || 91% || 8°
|-
| [[Worlds#Europa|Europa]] || 210W || 42% || 32°
|-
| [[Worlds#Mimas|Mimas]] || 90W || 18% || 126°
|-
| [[Worlds#Space|Asteroid belt]] || 500W || 100% || 0°
|-
| [[Worlds#Loulan|Loulan]] || 455W || 91% || 8°
|-
| [[Worlds#Vulcan|Vulcan]] || 750W || 150% || 48°
|-
| [[Worlds#Venus|Venus]] || 500W || 100% || 0°
|-
|}

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Horizontal || Degrees || Set the horizontal rotation of the Solar Panel (clockwise, 0-360°, data port is at 270°)
|-
| Vertical || Degrees || Sets the vertical angle of the Solar Panel (As of at least version 0.2.3263.16264, solar panels accept input in degrees above the horizon instead of in percent, so the solar panels travel between inputs of 15 and 165, with 90 being straight up. Previously, this was supposedly a Percentage "accepting 0-100% which translates to 15°-165°, 50%=90° =zenith")
|-
| On || Boolean || Turns the solar panel on or off
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Charge || W || Returns the power generated in Watts
|-
| Horizontal || degrees || Returns the horizontal rotation of the Solar Panel
|-
| Vertical || % || Returns the vertical angle of the Solar Panel
|-
| Maximum || W || Maximum possible power for this planet
|-
| Ratio || || How close to maximum current performance is, 1.0 means panel is perfectly directed and unobstructed
|-
| On || Boolean || Returns the on/off state of the solar panel
|}
</translate>

File:SolidFuelGenerator.png

2025-01-25T03:29:01Z

Katree:

[[Category:Power]]
=={{int:filedesc}}==
{{Information
|description={{en|1=Solid Fuel Generator}}
|date=2018-09-04
|source={{own}}
|author=[[User:Silverflyone|Silverflyone]]
|permission=
|other versions=
}}

=={{int:license-header}}==
{{licensing|generic}}

Solid Fuel Generator

2025-01-25T03:28:07Z

Katree: Adding power category

[[Category:Power]]
<translate>


{{Itembox
| name = Kit (Solid Generator)
| image = [[File:ItemKitSolidGenerator.png]]
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 50x [[Iron]], 10x [[Copper]]
}}
{{Structurebox
| name = Solid Fuel Generator
| prefab_hash = 1293995736
| image = [[File:SolidFuelGenerator.png]]
| power_usage = 20 kW generated per each tick
| placed_with_item = [[Kit (Solid Generator)]]
| placed_on_grid = Large Grid
| decon_with_tool1 = [[Hand Drill]]
}}

== Description == 
A machine that converts solid fuel to energy. It generates up to 20 kW per game-tick (40 kJ/s).

{| class="wikitable sortable"
|-
! Fuel !! Time to burn !! Total energy
|-
| [[Coal]] || 5 s || 200 kJ (55.5 kWh)
|-
| [[Charcoal]] || 3 s || 60 kJ (16.6 kWh)
|-
| [[SolidFuel]] || 6 s || 400 kJ (111 kWh)
|}

== Generation == 

This generator outputs energy dependent on the demand, up to 20kW. In particular, it can be connected to a [[Cable Coil|cable coil]] if the demand is up to 5kW. Higher demand requires a [[Cable_Coil_(Heavy)|heavy cable coil]]. Demands lower than 20kW result in an energy loss, as this generator burns fuel at a constant rate independent of the demand.

== Energy storage == 

This generator fully charges a [[Station Battery|station battery]] (with a [[Cable_Coil_(Heavy)|heavy cable coil]]) with the following:

{| class="wikitable sortable"
|-
! Fuel !! Amount
|-
| [[Coal]] || 18 units
|-
| [[Charcoal]] || 60 units
|-
| [[SolidFuel]] || 9 units
|}

== Waste == 
This generator exhaust gases to its surroundings as follows:

{| class="wikitable sortable"
|-
! Fuel !! [[Carbon Dioxide]] !! [[Pollutant]]
|-
| [[Coal]] || 10 mol || 3 mol
|-
| [[Charcoal]] || 3 mol || 3 mol
|-
| [[SolidFuel]] || 5 mol || 20 mol
|}

</translate>

File:ItemPowerConnector.png

2025-01-25T03:26:29Z

Katree:

[[Category:Power]]

File:ItemAreaPowerControl.png

2025-01-25T03:25:51Z

Katree:

[[Category:Power]]

Power Connector

2025-01-25T03:24:25Z

Katree: Adding power category

[[Category:Items]] [[Category:Power]]
{{Itembox
| name = Power Connector
| image = [[File:ItemPowerConnector.png]]
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 10g [[Iron]], 3g [[Gold]], 5g [[Copper]]
}}

==Description==
Used to connect the [[Portable Generator]] to the power grid.

Power Controller

2025-01-25T03:23:23Z

Katree: Adding power category

[[Category:Power]]
<languages />
<translate>
{{Itembox
| name = Power Controller
| image = [[File:ItemAreaPowerControl.png]]
| stacks = 5
| maxinpower = 10W for the APC + 1000W Battery Charging + Output Load
| maxoutpower = No Limit
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Iron]], 2g [[Copper]], 3g [[Solder]]
}}
{{Structurebox
| name = Area Power Controller
| power_usage = 10W
| placed_with_item = [[Power Controller]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Power Controller]]
}}
== Description == 
The [[Power Controller|Area Power Controller]] is used to segregate power into their own subnetworks and reduce power fluctuations.

== Usage == 
The APC can be opened with a [[Crowbar]], once opened the switch must be set to the 'ON' state for it to function. A [[Battery Cell]] can be added to act as a power buffer for the subnetwork in the event the main power network gets disconnected.
 
The APC can generally be used for machines with varying power requirements such as the Auto lathe, Electronics Printer, Fabricator, Arc Furnace, and more. This will allow all these machines to take lots of power in short intervals as long as the APC has a battery. Unlike the [[Transformer]], the APC will not limit the amount of power it passes through.

If sufficient power is available upstream, the APC acts as a pass through and will not limit it's output power, it is recommended to use a [[Fuse|Cable Fuse]] or [[Transformer|Transformer (Small)]] when powering a non-heavy cable network to prevent overdraw.

{{Data Network Header}} There is no difference in parameters, whether the logic network is connected to the input or output of the Area Power Control.

=== Mode Values ===
This shows the values of the "Mode" property, mapped to what the display will show.
{| class="wikitable"
|-
! Value !! Display !! Meaning
|-
| 0 || Grey || The Area Power Control is turned off or is missing a battery.
|-
| 1 || Red || No battery in the Area Power Control and there is power drawn from the output.
|-
| 2 || Blue-red blinking || There is a battery in the Area Power Control, the output draw is greater than the input and the battery is discharging.
|-
| 3 || Blue-green blinking || There is a battery in the Area Power Control, the output draw is less than the input and the battery is charging.
|-
| 4 || Green || There is a battery in the Area Power Control, the output draw is less than the input and the battery is fully charged.
|}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Open || Boolean || Opens the Area Power Control lid, when set to 1. Closes it, when set to 0.
|-
| Mode || Integer || Sets the mode to the passed value. This will only be set for less than a second, before the Area Power Control will override it with it's current mode. (See [[#Mode_Values|Mode Values]])
|-
| Lock || Boolean || Locks the Area Power Control, when set to 1. Unlocks it, when set to 0.
|-
| On || Boolean || Turns the Area Power Control on, when set to 1. Turns it off, when set to 0.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean || Returns whether the Area Power Control is receiving power and is turned on. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Area Power Control is open. (0 for no, 1 for yes)
|-
| Mode || Integer || Returns the current mode of the Area Power Control. (See [[#Mode_Values|Mode Values]])
|-
| Error || Boolean || Returns whether the Area Power Control is flashing an error. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Area Power Control is locked. (0 for no, 1 for yes)
|-
| Charge || Integer || Returns the currently available power, that can be output, in Watts. (Input power plus the charge of the battery in the Area Power Control.)
|-
| Maximum || Integer || Returns the maximum charge of the battery in the Area Power Control, in Watts.
|-
| Ratio || Float || Returns a range from 0.0 to 1.0. It returns the current charge percentage of the battery in the Area Power Control.
|-
| PowerPotential || Integer || Returns the current amount of power, available to the Area Power Control input, in Watts.
|-
| PowerActual || Integer || Returns the current amount of power, output by the Area Power Control, in Watts.
|-
| On || Boolean || Returns whether the Area Power Control is on. (0 for no, 1 for yes)
|-
| RequiredPower || Integer || Returns the current amount of power needed at the input, in Watts. (This includes the amount of power draw of the battery inside.)
|}

== History == 
* In older versions of the game, the APC had specific Input and Output connection sides until a later update added a variant of the APC with reversed sides.

* In older versions of the game, a battery must be placed in the APC for it to function. This is no longer the case after the [https://steamcommunity.com/gid/103582791457826119/announcements/detail/1581192507757380156 power rework update] in v0.1.1062.5426 as you '''do not''' ''need'' a battery in the APC for it to function anymore.

</translate>

Category:Power

2025-01-25T03:21:05Z

Katree:

Power is a type of energy used to operate tools and workstations. This category is for all items or guides related to power.

Category:Power

2025-01-25T03:20:29Z

Katree: Creating this new catagory for better relating of all pages related to power

This category is for all items or guides related to power. Power is a type of energy used to operate tools and workstations.

Recycler

2025-01-25T03:06:42Z

Katree: /* Description */

[[Category:Import/Export]]
<languages />
<translate>
== Description ==

[[Category:Machines]]
{{Itembox
| name = Kit (Recycler)
| image = [[File:ItemKitRecycler.png]]
| createdwith = [[Autolathe]], [[Fabricator]]
| cost = 20g [[Iron]], 10g [[Copper]]
}}
{{Structurebox
| name = Recycler
| image = [[File:StructureRecycler.png]]
| power_usage = 100W 
| placed_with_item = [[Kit (Recycler)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Recycler)]]
}}
Used to recycle a variety of items. It outputs a [[Reagent Mix]] that can be turned back into ores in a [[Centrifuge]] or just smelted in a [[Furnace]] if it has correct [[ore]]/alloy proportions.
*Recycles items with a 50% loss,
*Losslessly recycles materials produced in furnaces, especially ingots, and reagent mixes.

Note: since ingots can be recycled into reagents, which can then be put into the centrifuge with 100% reclamation of the material from the ingot into the ore. This allows you to smelt the same ores over and over and extract the gases from them each time, creating an infinite supply of gases, including [[Oxygen]] on Vulcan. This is not intentional and may be removed at some point.

Items within a container, such as a toolbelt, will also be recycled and added to the resulting reagent ore.

==Automation==

Managing the Recycler from an IC is challenging, because while it has an Import and Export slot, there is also an internal inventory that is not visible to the MIPS API.
</translate>

Furnace

2023-11-10T19:44:13Z

Katree:

<languages/>
<translate>

[[Category:Machines]]
{{Itembox
| name = Kit (Furnace)
| image = [[File:ItemKitFurnace.png]]
| createdwith = [[Special:MyLanguage/Autolathe|Autolathe]], [[Special:MyLanguage/Fabricator|Fabricator]]
| cost = 30g [[Special:MyLanguage/Iron|Iron]], 10g [[Special:MyLanguage/Copper|Copper]]
| volume = 1000 L
| logic =
* Open
* Pressure
* Temperature
* Lock
* Setting
* Reagents
* RatioOxygen
* RatioCarbonDioxide
* RatioNitrogen
* RatioPollutant
* RatioVolatile
* RatioWater
* Maximum
* Ratio
* ImportQuantity
* ImportSlotOccupant
* ExportQuantity
* ExportSlotOccupant


}}
{{Structurebox
| name = Furnace
| image = [[File:Furnace.jpg]]
| placed_with_item = [[Kit (Furnace)]]
| placed_on_grid = Small Grid
| const_with_tool1 = [[Wrench]]
| const_with_item1 = 2x [[Iron Sheets]]
| decon_with_tool1 = [[Crowbar]]
| item_rec1 = [[Kit (Furnace)]]
| const_with_tool2 = [[Welding Torch]]
| const_with_item2 = 2x [[Iron Sheets]]
| decon_with_tool2 = [[Special:MyLanguage/Crowbar|Crowbar]]
| item_rec2 = 2x [[Iron Sheets]]
| decon_with_tool3 = [[Angle Grinder]]
| item_rec3 = 2x [[Iron Sheets|Iron Sheets]]
}}

== Description == 
Used to smelt [[Ore|ore]] into ingots and alloys using an oxygen/volatile gas mix. [[Special:MyLanguage/Ice (Oxite)|Ice (Oxite)]] and [[Special:MyLanguage/Ice (Volatiles)|Ice (Volatiles)]] can be manually input directly in the furnace in order to create crude gas mixtures, or to be directly extracted as an easy trick for melting the ice.


If the contents of the furnace are ejected without reaching the required temperature and pressure for smelting, they'll come out as [[Special:MyLanguage/Reagent Mix|Reagent Mix]] which can be processed in a [[Special:MyLanguage/Centrifuge|Centrifuge]] to recover the raw ores. [[Special:MyLanguage/Reagent Mix|Reagent Mix]] can also be re-smelted if the ingredients and ratios are a valid alloy recipe. This allows an intermission when the resources for reaching the required temperature / pressure are not on hand / need to be gathered first. Effectively, this means that the used metals can be 'reserved' for the intended alloy.

== Recipes == 


While smelting steel is easily achieved with ice, other recipes usually require a working piping setup (a valve and passive vent at bare minimum to vent the internal gasses). This can be done by separating gases into tanks using atmospheric units and piping individual gases through a mixer and a [[Special:MyLanguage/Pressure Regulator|Pressure Regulator]] or a [[Special:MyLanguage/Pipe Volume Pump|Pipe Volume Pump]] connected to the furnace input. Output should also be extracted and vented/recycled through a backpressure regulator to keep furnace pressure in check. The optimal gas mix that burns completely is 1 part (33.3%) oxygen to 2 parts (66.6%) volatiles, other mixes would also work but leave you with leftover oxygen or volatiles depending on the percentages used. It could also result in lower temperature if that is desired, but you could also use a volume pump with a lower fuel input setting.


'''Make sure to put the fuel in first, then press the activate button. Afterwards put in the ingredients and press the handle after you see the "will produce" while hovering over the furnace.''' Also, You MUST put in exact amounts matching the recipe amounts. For instance, you must put in 12 iron and 4 coal to make 16 steel. You cannot put in 12 iron and 7 coal. The furnace will not manufacture anything if the ingredient ratios are not correct and you will have to eject it all or add resources to balance the recipe.
{{:Furnace/Recipes}}

=== Tips === 
*Placing 15 ice(volatiles) and 15 ice(oxite) will bring pressure to around 22000kpa and temp 2000k. For Invar, you will have to wait for the temperature to drop before you can process. You can use this time while the pressure is still over 20000kpa to make constantan. 
*All other alloys can be achieved with 2 volatiles and 1 oxite
*If atmosphere inside and/or around furnace is too cold to melt ice one can press 'activate' button to manually melt one ice per ignition attempt. You will need to press the ignition button for each piece of ice from the first stack that you put in. Until all solid matter was melted the import slot will remain blocked.
*[[Special:MyLanguage/Reagent Mix|Reagent Mix]] can be re-melted to continue balancing the recipe should you need to gather more resources or find yourself unable to balance the temperature/pressure manually.

===Some example fuel mixes=== 


<div style="overflow-x: auto;">
{| class="wikitable"
! colspan="1" rowspan="2" |Prime
! colspan="1" rowspan="2" |FAR
! colspan="2" rowspan="1" |In: Mols
! colspan="3" rowspan="1" |Result
! colspan="4" rowspan="1" |Out: Mols
|-
!H2
!O2
!Press.
!Celcius
!Kelvin
!O2
!H2
!Co2
!X
|-
|100 kPa
|2:1
|29
|14
|2 135
|1 953
|2 216
|1
|3
|82
|33
|-
|200 kPa
|2:1
|59
|29
|4 500
|2 000
|2 273
|1
|5
|169
|80
|-
|200 kPa
|3:1
|65
|21
|3 400
|1 900
|2 173
|2
|26
|118
|52
|-
|200 kPa
|4:1
|72
|18
|3 000
|1 800
|2 273
|1
|40
|99
|42
|-
|200 kPa
|1:1
|43
|43
|3 493
|1 917
|2 190
|22
|2
|127
|59
|-
|200 kPa
|1:4
|17
|68
|1 646
|1 319
|1 592
|63
|2
|50
|18
|-
|300 kPa
|2:1
|86
|42
|6 850
|2 109
|2 382
|2
|7
|242
|115
|-
|902.7 kPa
|2:1
|263
|108
|19.25 MPa
|2 054
|2 357
|70
|7
|767
|151
|-
|1 MPa
|2:1
|291
|120
|21.62 MPa
|2 061
|2 334
|74
|7
|862
|170
|-
|1.497 MPa
|2:1
|408
|204
|35.34 MPa
|2 121
|2 394
|10
|20
|1163
|581
|}
</div>


{{Data Network Header}}


{{Data Parameters}}
{| class="wikitable mw-collapsible"
|-
! Parameter Name !! Data Type !! Description
|-
| Activate || Boolean || Activates the Furnace, when set to 1.
|-
| ClearMemory || Boolean || When set to 1,clears the counter memory(e.g.ExportCount). Will set itself back to 0 when actioned.
|-
| Lock || Boolean || Locks the Furnace, when set to 1. Unlocks it when set to 0.
|-
| Mode|| Integer || (Unknown).
|-
| Open || Boolean || Opens the Furnace, when set to 1. Closes it, when set to 0.
|-
| Setting || Float || (Unknown) Affects the Setting output.
|}


{{Data Outputs}}
{| class="wikitable mw-collapsible"
|-
! Output Name !! Data Type !! Description
|-
| Activate || Boolean || Returns if the furnace is active.
|-
| Combustion|| Boolean || Returns 1 if the furnace atmosphere is on fire.
|-
| ExportCount || Integer || How many items exported since last ClearMemory.
|-
| ImportCount || Integer || How many items imported since last ClearMemory.
|-
| Lock || Boolean || Returns whether the Furnace is locked.
|-
| Maximum || Integer || (Unknown) Returns 100.
|-
| Mode || Integer || (Unknown).
|-
| Open || Boolean || Returns whether the Furnace is open. (0 for no, 1 for yes).
|-
| PrefabHash || Integer || The hash of the structure.
|-
| Pressure || Float || Returns the pressure in the Furnace in kilo pascal.
|-
| Ratio || Float || (Unknown) Returns 0.5.
|-
| RatioCarbonDioxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Furnace.
|-
| RatioNitrogen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Furnace.
|-
| RatioNitrousOxide || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrous oxide in the Furnace.
|-
| RatioOxygen || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Furnace.
|-
| RatioPollutant || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Furnace.
|-
| RatioVolatiles || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Furnace.
|-
| RatioWater || Float || Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Furnace.
|-
| Reagents || Float || Returns the amount of reagents (smeltable ores, not counting ice) in the Furnace, in grams.
|-
| RecipeHash || int || Current hash of the recipe the device is set to produce.
|-
| Setting || Float || (Unknown) Affected by the Setting parameter.
|-
| Temperature || Float || Returns the temperature in the Furnace in kelvin.
|-
| TotalMoles || Float || Returns the total moles of the furnace.
|}
</translate>

Ore

2023-11-10T19:42:07Z

Katree: /* Description */

[[Category:Ore]]
<languages />
<translate>
{{Infobox
| title = Ores, Solid Fuels, and Frozen Gases
| data1 = {{image frame
| innerstyle = border: 5px solid #ffffff!important; border-radius: 18px;
| content = {{image array|perrow = 3
| width=128
| height=128
| image1 = ItemCobaltOre.png | caption1 = Cobalt
| image2 = ItemCopperOre.png | caption2 = Copper
| image3 = ItemGoldOre.png | caption3 = Gold
| image4 = ItemIronOre.png | caption4 = Iron
| image5 = ItemLeadOre.png | caption5 = Lead
| image6 = ItemNickelOre.png | caption6 = Nickel
| image7 = ItemSiliconOre.png | caption7 = Silicon
| image8 = ItemSilverOre.png | caption8 = Silver
| image9 = ItemReagentMix.png | caption9 = Reagent Mix
| image10 = ItemCoalOre.png | caption10 = Coal
| image11 = ItemUraniumOre.png | caption11 = Uranium
| image12 = ItemOxite.png | caption12 = Oxite
| image13 = ItemVolatiles.png | caption13 = Volatiles
| image14 = ItemIce.png | caption14 = Ice
}}
}}
| label2 = Stacks
| data2 = 50
| label3 = Mined with
| data3 = [[Mining_Drill|Mining Drill]], [[Mining_Drill_(Heavy)|Heavy Mining Drill]]
}}

== Description ==
These are items that are mined and can often be smelted into ingots at a [[Furnace|furnace]]. Certain ores can be mixed together into alloys. You can also get mixed ore by recycling items in the [[Recycler]] and then passing it through the [[Centrifuge]] which will break it down into ore for smelting.

There are some ores that will melt when exposed to sunlight or heat and produce [[Gas|gases]]. For example [[Ice (Water)]] melts into [[Water]] and [[Oxygen]]. Be careful to keep these out of heat or sunlight until you actually want them to melt.

== Ores ==
<table style="transparent: none">
<tr>
<td>
*[[Biomass]]
*[[Charcoal]]
*[[Ore (Coal)]]
*[[Ore (Cobalt)]]
*[[Ore (Copper)]]
*[[Ore (Gold)]]
*[[Ore (Iron)]]
</td>
<td>
*[[Ore (Lead)]]
*[[Ore (Nickel)]]
*[[Ore (Silicon)]]
*[[Ore (Silver)]]
*[[Ore (Uranium)]]
*[[Reagent Mix]]
</td>
</table>

== Frozen Ores ==
*[[Ice (Water)]]
*[[Ice (Nitrice)]]
*[[Ice (Oxite)]]
*[[Ice (Volatiles)]]

== Pure Ices ==
<table>
<tr>
<td>
*[[Pure Ice Water]]
*[[Pure Ice Carbon Dioxide]]
*[[Pure Ice Nitrogen]]
*[[Pure Ice NitrousOxide]]
*[[Pure Ice Oxygen]]
*[[Pure Ice Pollutant]]
*[[Pure Ice Volatiles]]
</td>
<td>
*[[Pure Ice Liquid Carbon Dioxide]]
*[[Pure Ice Liquid Nitrogen]]
*[[Pure Ice Liquid Nitrous]]
*[[Pure Ice Liquid Oxygen]]
*[[Pure Ice Liquid Pollutant]]
*[[Pure Ice Liquid Volatiles]]
*[[Pure Ice Steam]]
</td>
</table>

= Recipes Tables =

{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Basic Ingots made from one Ore
! colspan="2" | Used in [[Kit_(Arc_Furnace)|Arc Furnace]], [[Furnace]], [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|copper ore|1}} || {{icon|copper|1}}
|-
| {{icon|gold ore|1}} || {{icon|gold|1}}
|-
| {{icon|iron ore|1}} || {{icon|iron|1}}
|-
| {{icon|lead ore|1}} || {{icon|lead|1}}
|-
| {{icon|nickel ore|1}} || {{icon|nickel|1}}
|-
| {{icon|silicon ore|1}} || {{icon|silicon|1}}
|-
| {{icon|silver ore|1}} || {{icon|silver|1}}
|}
{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Alloys made from two Ores
! colspan="2" | Used in [[Furnace]], [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|copper ore|1}}{{icon|nickel ore|1}} || {{icon|constantan|2}}
|-
| {{icon|gold ore|1}}{{icon|silver ore|1}} || {{icon|electrum|2}}
|-
| {{icon|iron ore|1}}{{icon|nickel ore|1}} || {{icon|invar|2}}
|-
| {{icon|iron ore|1}}{{icon|lead ore|1}} || {{icon|solder|2}}
|-
| {{icon|iron ore|3}}{{icon|coal ore|1}} || {{icon|steel|4}}
|}
{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Super Alloys made from three Ores
! colspan="2" | Used in [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|steel|2}}{{icon|copper ore|1}}{{icon|cobalt ore|1}} || {{icon|astroloy|1}}
|-
| {{icon|silver ore|2}}{{icon|nickel ore|1}}{{icon|cobalt ore|1}} || {{icon|hastelloy|1}}
|-
| {{icon|gold ore|2}}{{icon|nickel ore|1}}{{icon|steel|1}} || {{icon|inconel|1}}
|-
| {{icon|lead ore|2}}{{icon|silver ore|1}}{{icon|nickel ore|1}} || {{icon|waspaloy|1}}
|-
| {{icon|silicon ore|2}}{{icon|silver ore|1}}{{icon|cobalt ore|1}} || {{icon|stellite|1}}
|}
= Gallery =
<Gallery>
|caption=Ores as seen on the planet
|widths=160 | heights=160>
File:Cobalt_ore.jpg |alt1=[[#Cobalt|Cobalt Ore]] |[[#Cobalt|Cobalt Ore]]
File:Copper_ore.jpg |alt1=[[#Copper|Copper Ore]] |[[#Copper|Copper Ore]]
File:Gold_ore.jpg |alt1=[[#Gold|Gold Ore]] |[[#Gold|Gold Ore]]
File:Iron_ore.jpg |alt1=[[#Iron|Iron Ore]] |[[#Iron|Iron Ore]]
File:Lead_ore.jpg |alt1=[[#Lead|Lead Ore]] |[[#Lead|Lead Ore]]
File:Nickel_ore.jpg |alt1=[[#Nickel|Nickel Ore]] |[[#Nickel|Nickel Ore]]
File:Silicon_ore.jpg |alt1=[[#Silicon|Silicon Ore]] |[[#Silicon|Silicon Ore]]
File:Silver_ore.jpg |alt1=[[#Silver|Silver Ore]] |[[#Silver|Silver Ore]]
File:Coal_ore.jpg |alt1=[[#Coal|Coal Ore]] |[[#Coal|Coal Ore]]
File:Uranium_ore.jpg |alt1=[[#Uranium|Uranium Ore]] |[[#Uranium|Uranium Ore]]
File:Oxite_ore.jpg |alt1=[[#Oxite|Oxites]] |[[#Oxite|Oxites]]
File:Volatiles_ore.jpg |alt1=[[#Volatiles|Volatiles]] |[[#Volatiles|Volatiles]]
File:Ice_ore.jpg |alt1=[[#Ice|Ice]] |[[#Ice|Ice]]
</Gallery>
</translate>

Ore

2023-11-08T05:04:22Z

Katree:

[[Category:Ore]]
<languages />
<translate>
{{Infobox
| title = Ores, Solid Fuels, and Frozen Gases
| data1 = {{image frame
| innerstyle = border: 5px solid #ffffff!important; border-radius: 18px;
| content = {{image array|perrow = 3
| width=128
| height=128
| image1 = ItemCobaltOre.png | caption1 = Cobalt
| image2 = ItemCopperOre.png | caption2 = Copper
| image3 = ItemGoldOre.png | caption3 = Gold
| image4 = ItemIronOre.png | caption4 = Iron
| image5 = ItemLeadOre.png | caption5 = Lead
| image6 = ItemNickelOre.png | caption6 = Nickel
| image7 = ItemSiliconOre.png | caption7 = Silicon
| image8 = ItemSilverOre.png | caption8 = Silver
| image9 = ItemReagentMix.png | caption9 = Reagent Mix
| image10 = ItemCoalOre.png | caption10 = Coal
| image11 = ItemUraniumOre.png | caption11 = Uranium
| image12 = ItemOxite.png | caption12 = Oxite
| image13 = ItemVolatiles.png | caption13 = Volatiles
| image14 = ItemIce.png | caption14 = Ice
}}
}}
| label2 = Stacks
| data2 = 50
| label3 = Mined with
| data3 = [[Mining_Drill|Mining Drill]], [[Mining_Drill_(Heavy)|Heavy Mining Drill]]
}}

== Description ==
These are items that are mined and can often be smelted. You can also get mixed ore by recycling items in the [[Recycler]] and then passing it through the [[Centrifuge]] which will break it down into ore for smelting.

There are some ores that will melt when exposed to sunlight or heat and produce [[Gas|gases]]. For example [[Ice (Water)]] melts into [[Water]] and [[Oxygen]]. Be careful to keep these out of heat or sunlight until you actually want them to melt.

== Ores ==
<table style="transparent: none">
<tr>
<td>
*[[Biomass]]
*[[Charcoal]]
*[[Ore (Coal)]]
*[[Ore (Cobalt)]]
*[[Ore (Copper)]]
*[[Ore (Gold)]]
*[[Ore (Iron)]]
</td>
<td>
*[[Ore (Lead)]]
*[[Ore (Nickel)]]
*[[Ore (Silicon)]]
*[[Ore (Silver)]]
*[[Ore (Uranium)]]
*[[Reagent Mix]]
</td>
</table>

== Frozen Ores ==
*[[Ice (Water)]]
*[[Ice (Nitrice)]]
*[[Ice (Oxite)]]
*[[Ice (Volatiles)]]

== Pure Ices ==
<table>
<tr>
<td>
*[[Pure Ice Water]]
*[[Pure Ice Carbon Dioxide]]
*[[Pure Ice Nitrogen]]
*[[Pure Ice NitrousOxide]]
*[[Pure Ice Oxygen]]
*[[Pure Ice Pollutant]]
*[[Pure Ice Volatiles]]
</td>
<td>
*[[Pure Ice Liquid Carbon Dioxide]]
*[[Pure Ice Liquid Nitrogen]]
*[[Pure Ice Liquid Nitrous]]
*[[Pure Ice Liquid Oxygen]]
*[[Pure Ice Liquid Pollutant]]
*[[Pure Ice Liquid Volatiles]]
*[[Pure Ice Steam]]
</td>
</table>

= Recipes Tables =

{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Basic Ingots made from one Ore
! colspan="2" | Used in [[Kit_(Arc_Furnace)|Arc Furnace]], [[Furnace]], [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|copper ore|1}} || {{icon|copper|1}}
|-
| {{icon|gold ore|1}} || {{icon|gold|1}}
|-
| {{icon|iron ore|1}} || {{icon|iron|1}}
|-
| {{icon|lead ore|1}} || {{icon|lead|1}}
|-
| {{icon|nickel ore|1}} || {{icon|nickel|1}}
|-
| {{icon|silicon ore|1}} || {{icon|silicon|1}}
|-
| {{icon|silver ore|1}} || {{icon|silver|1}}
|}
{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Alloys made from two Ores
! colspan="2" | Used in [[Furnace]], [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|copper ore|1}}{{icon|nickel ore|1}} || {{icon|constantan|2}}
|-
| {{icon|gold ore|1}}{{icon|silver ore|1}} || {{icon|electrum|2}}
|-
| {{icon|iron ore|1}}{{icon|nickel ore|1}} || {{icon|invar|2}}
|-
| {{icon|iron ore|1}}{{icon|lead ore|1}} || {{icon|solder|2}}
|-
| {{icon|iron ore|3}}{{icon|coal ore|1}} || {{icon|steel|4}}
|}
{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Super Alloys made from three Ores
! colspan="2" | Used in [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|steel|2}}{{icon|copper ore|1}}{{icon|cobalt ore|1}} || {{icon|astroloy|1}}
|-
| {{icon|silver ore|2}}{{icon|nickel ore|1}}{{icon|cobalt ore|1}} || {{icon|hastelloy|1}}
|-
| {{icon|gold ore|2}}{{icon|nickel ore|1}}{{icon|steel|1}} || {{icon|inconel|1}}
|-
| {{icon|lead ore|2}}{{icon|silver ore|1}}{{icon|nickel ore|1}} || {{icon|waspaloy|1}}
|-
| {{icon|silicon ore|2}}{{icon|silver ore|1}}{{icon|cobalt ore|1}} || {{icon|stellite|1}}
|}
= Gallery =
<Gallery>
|caption=Ores as seen on the planet
|widths=160 | heights=160>
File:Cobalt_ore.jpg |alt1=[[#Cobalt|Cobalt Ore]] |[[#Cobalt|Cobalt Ore]]
File:Copper_ore.jpg |alt1=[[#Copper|Copper Ore]] |[[#Copper|Copper Ore]]
File:Gold_ore.jpg |alt1=[[#Gold|Gold Ore]] |[[#Gold|Gold Ore]]
File:Iron_ore.jpg |alt1=[[#Iron|Iron Ore]] |[[#Iron|Iron Ore]]
File:Lead_ore.jpg |alt1=[[#Lead|Lead Ore]] |[[#Lead|Lead Ore]]
File:Nickel_ore.jpg |alt1=[[#Nickel|Nickel Ore]] |[[#Nickel|Nickel Ore]]
File:Silicon_ore.jpg |alt1=[[#Silicon|Silicon Ore]] |[[#Silicon|Silicon Ore]]
File:Silver_ore.jpg |alt1=[[#Silver|Silver Ore]] |[[#Silver|Silver Ore]]
File:Coal_ore.jpg |alt1=[[#Coal|Coal Ore]] |[[#Coal|Coal Ore]]
File:Uranium_ore.jpg |alt1=[[#Uranium|Uranium Ore]] |[[#Uranium|Uranium Ore]]
File:Oxite_ore.jpg |alt1=[[#Oxite|Oxites]] |[[#Oxite|Oxites]]
File:Volatiles_ore.jpg |alt1=[[#Volatiles|Volatiles]] |[[#Volatiles|Volatiles]]
File:Ice_ore.jpg |alt1=[[#Ice|Ice]] |[[#Ice|Ice]]
</Gallery>
</translate>

Ore

2023-11-08T04:57:52Z

Katree: Merging old Ores page into this one.

<languages />
<translate>
{{Infobox
| title = Ores, Solid Fuels, and Frozen Gases
| data1 = {{image frame
| innerstyle = border: 5px solid #ffffff!important; border-radius: 18px;
| content = {{image array|perrow = 3
| width=128
| height=128
| image1 = ItemCobaltOre.png | caption1 = Cobalt
| image2 = ItemCopperOre.png | caption2 = Copper
| image3 = ItemGoldOre.png | caption3 = Gold
| image4 = ItemIronOre.png | caption4 = Iron
| image5 = ItemLeadOre.png | caption5 = Lead
| image6 = ItemNickelOre.png | caption6 = Nickel
| image7 = ItemSiliconOre.png | caption7 = Silicon
| image8 = ItemSilverOre.png | caption8 = Silver
| image9 = ItemReagentMix.png | caption9 = Reagent Mix
| image10 = ItemCoalOre.png | caption10 = Coal
| image11 = ItemUraniumOre.png | caption11 = Uranium
| image12 = ItemOxite.png | caption12 = Oxite
| image13 = ItemVolatiles.png | caption13 = Volatiles
| image14 = ItemIce.png | caption14 = Ice
}}
}}
| label2 = Stacks
| data2 = 50
| label3 = Mined with
| data3 = [[Mining_Drill|Mining Drill]], [[Mining_Drill_(Heavy)|Heavy Mining Drill]]
}}

== Description ==
These are items that are mined and can often be smelted. You can also get mixed ore by recycling items in the [[Recycler]] and then passing it through the [[Centrifuge]] which will break it down into ore for smelting.

There are some ores that will melt when exposed to sunlight or heat and produce [[Gas|gases]]. For example [[Ice (Water)]] melts into [[Water]] and [[Oxygen]]. Be careful to keep these out of heat or sunlight until you actually want them to melt.

== Ores ==
<table>
<tr>
<td>
*[[Biomass]]
*[[Charcoal]]
*[[Ore (Coal)]]
*[[Ore (Cobalt)]]
*[[Ore (Copper)]]
*[[Ore (Gold)]]
*[[Ore (Iron)]]
</td>
<td>
*[[Ore (Lead)]]
*[[Ore (Nickel)]]
*[[Ore (Silicon)]]
*[[Ore (Silver)]]
*[[Ore (Uranium)]]
*[[Reagent Mix]]
</td>
</table>

== Frozen Ores ==
*[[Ice (Water)]]
*[[Ice (Nitrice)]]
*[[Ice (Oxite)]]
*[[Ice (Volatiles)]]

== Pure Ices ==
<table>
<tr>
<td>
*[[Pure Ice Water]]
*[[Pure Ice Carbon Dioxide]]
*[[Pure Ice Nitrogen]]
*[[Pure Ice NitrousOxide]]
*[[Pure Ice Oxygen]]
*[[Pure Ice Pollutant]]
*[[Pure Ice Volatiles]]
</td>
<td>
*[[Pure Ice Liquid Carbon Dioxide]]
*[[Pure Ice Liquid Nitrogen]]
*[[Pure Ice Liquid Nitrous]]
*[[Pure Ice Liquid Oxygen]]
*[[Pure Ice Liquid Pollutant]]
*[[Pure Ice Liquid Volatiles]]
*[[Pure Ice Steam]]
</td>
</table>

= Recipes Tables =

{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Basic Ingots made from one Ore
! colspan="2" | Used in [[Kit_(Arc_Furnace)|Arc Furnace]], [[Furnace]], [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|copper ore|1}} || {{icon|copper|1}}
|-
| {{icon|gold ore|1}} || {{icon|gold|1}}
|-
| {{icon|iron ore|1}} || {{icon|iron|1}}
|-
| {{icon|lead ore|1}} || {{icon|lead|1}}
|-
| {{icon|nickel ore|1}} || {{icon|nickel|1}}
|-
| {{icon|silicon ore|1}} || {{icon|silicon|1}}
|-
| {{icon|silver ore|1}} || {{icon|silver|1}}
|}
{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Alloys made from two Ores
! colspan="2" | Used in [[Furnace]], [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|copper ore|1}}{{icon|nickel ore|1}} || {{icon|constantan|2}}
|-
| {{icon|gold ore|1}}{{icon|silver ore|1}} || {{icon|electrum|2}}
|-
| {{icon|iron ore|1}}{{icon|nickel ore|1}} || {{icon|invar|2}}
|-
| {{icon|iron ore|1}}{{icon|lead ore|1}} || {{icon|solder|2}}
|-
| {{icon|iron ore|3}}{{icon|coal ore|1}} || {{icon|steel|4}}
|}
{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Super Alloys made from three Ores
! colspan="2" | Used in [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|steel|2}}{{icon|copper ore|1}}{{icon|cobalt ore|1}} || {{icon|astroloy|1}}
|-
| {{icon|silver ore|2}}{{icon|nickel ore|1}}{{icon|cobalt ore|1}} || {{icon|hastelloy|1}}
|-
| {{icon|gold ore|2}}{{icon|nickel ore|1}}{{icon|steel|1}} || {{icon|inconel|1}}
|-
| {{icon|lead ore|2}}{{icon|silver ore|1}}{{icon|nickel ore|1}} || {{icon|waspaloy|1}}
|-
| {{icon|silicon ore|2}}{{icon|silver ore|1}}{{icon|cobalt ore|1}} || {{icon|stellite|1}}
|}
= Gallery =
<Gallery>
|caption=Ores as seen on the planet
|widths=160 | heights=160>
File:Cobalt_ore.jpg |alt1=[[#Cobalt|Cobalt Ore]] |[[#Cobalt|Cobalt Ore]]
File:Copper_ore.jpg |alt1=[[#Copper|Copper Ore]] |[[#Copper|Copper Ore]]
File:Gold_ore.jpg |alt1=[[#Gold|Gold Ore]] |[[#Gold|Gold Ore]]
File:Iron_ore.jpg |alt1=[[#Iron|Iron Ore]] |[[#Iron|Iron Ore]]
File:Lead_ore.jpg |alt1=[[#Lead|Lead Ore]] |[[#Lead|Lead Ore]]
File:Nickel_ore.jpg |alt1=[[#Nickel|Nickel Ore]] |[[#Nickel|Nickel Ore]]
File:Silicon_ore.jpg |alt1=[[#Silicon|Silicon Ore]] |[[#Silicon|Silicon Ore]]
File:Silver_ore.jpg |alt1=[[#Silver|Silver Ore]] |[[#Silver|Silver Ore]]
File:Coal_ore.jpg |alt1=[[#Coal|Coal Ore]] |[[#Coal|Coal Ore]]
File:Uranium_ore.jpg |alt1=[[#Uranium|Uranium Ore]] |[[#Uranium|Uranium Ore]]
File:Oxite_ore.jpg |alt1=[[#Oxite|Oxites]] |[[#Oxite|Oxites]]
File:Volatiles_ore.jpg |alt1=[[#Volatiles|Volatiles]] |[[#Volatiles|Volatiles]]
File:Ice_ore.jpg |alt1=[[#Ice|Ice]] |[[#Ice|Ice]]
</Gallery>
</translate>

Ores

2023-11-08T04:57:06Z

Katree: Redirect to updated Ore page

#REDIRECT [[Ore]]
<languages />
<translate>
{{Infobox
| title = Ores, Solid Fuels, and Frozen Gases
| data1 = {{image frame
| innerstyle = border: 5px solid #ffffff!important; border-radius: 18px;
| content = {{image array|perrow = 3
| width=128
| height=128
| image1 = ItemCobaltOre.png | caption1 = Cobalt
| image2 = ItemCopperOre.png | caption2 = Copper
| image3 = ItemGoldOre.png | caption3 = Gold
| image4 = ItemIronOre.png | caption4 = Iron
| image5 = ItemLeadOre.png | caption5 = Lead
| image6 = ItemNickelOre.png | caption6 = Nickel
| image7 = ItemSiliconOre.png | caption7 = Silicon
| image8 = ItemSilverOre.png | caption8 = Silver
| image9 = ItemReagentMix.png | caption9 = Reagent Mix<big><ref group="last" name="ibReagent"/></big>
| image10 = ItemCoalOre.png | caption10 = Coal
| image11 = ItemUraniumOre.png | caption11 = Uranium
| image12 = ItemOxite.png | caption12 = Oxite
| image13 = ItemVolatiles.png | caption13 = Volatiles
| image14 = ItemIce.png | caption14 = Ice
}}
}}
| label2 = Stacks
| data2 = 50
| label3 = Mined with
| data3 = [[Mining_Drill|Mining Drill]], [[Mining_Drill_(Heavy)|Heavy Mining Drill]]
}}
Ores are smeltable and all of them have an ingot version except for cobalt, which is used in combination with other ores to create alloys. They will release small amounts of gases while smelting. The Arc furnace will release these gases into the atmosphere, and the standard furnace and advanced furnaces will each hold the gases inside.
= Recipes Tables =

{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Basic Ingots made from one Ore
! colspan="2" | Used in [[Kit_(Arc_Furnace)|Arc Furnace]], [[Furnace]], [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|copper ore|1}} || {{icon|copper|1}}
|-
| {{icon|gold ore|1}} || {{icon|gold|1}}
|-
| {{icon|iron ore|1}} || {{icon|iron|1}}
|-
| {{icon|lead ore|1}} || {{icon|lead|1}}
|-
| {{icon|nickel ore|1}} || {{icon|nickel|1}}
|-
| {{icon|silicon ore|1}} || {{icon|silicon|1}}
|-
| {{icon|silver ore|1}} || {{icon|silver|1}}
|}
{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Alloys made from two Ores
! colspan="2" | Used in [[Furnace]], [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|copper ore|1}}{{icon|nickel ore|1}} || {{icon|constantan|2}}
|-
| {{icon|gold ore|1}}{{icon|silver ore|1}} || {{icon|electrum|2}}
|-
| {{icon|iron ore|1}}{{icon|nickel ore|1}} || {{icon|invar|2}}
|-
| {{icon|iron ore|1}}{{icon|lead ore|1}} || {{icon|solder|2}}
|-
| {{icon|iron ore|3}}{{icon|coal ore|1}} || {{icon|steel|4}}
|}
{| class="wikitable mw-collapsible mw-collapsed" style="width:25em;"
|+ Super Alloys made from three Ores
! colspan="2" | Used in [[Advanced_Furnace|Adv. Furnace]]
|-
! Ores !! Ingot
|-
| {{icon|steel|2}}{{icon|copper ore|1}}{{icon|cobalt ore|1}} || {{icon|astroloy|1}}
|-
| {{icon|silver ore|2}}{{icon|nickel ore|1}}{{icon|cobalt ore|1}} || {{icon|hastelloy|1}}
|-
| {{icon|gold ore|2}}{{icon|nickel ore|1}}{{icon|steel|1}} || {{icon|inconel|1}}
|-
| {{icon|lead ore|2}}{{icon|silver ore|1}}{{icon|nickel ore|1}} || {{icon|waspaloy|1}}
|-
| {{icon|silicon ore|2}}{{icon|silver ore|1}}{{icon|cobalt ore|1}} || {{icon|stellite|1}}
|}

= Ores =
=== Cobalt ===
[[Ore (Cobalt)]] is mined throughout the surface and underground of a planet or an asteroid using a Mining Drill.

There is currently no recipe to make Ingot (Cobalt). It can be combined in the Advanced Furnace to create the advanced alloys Ingot (Astroloy), Ingot (Hastelloy) and Ingot (Stellite). Only Ingot (Astroloy) has a use so far to make the Tool Printer Mod and the AIMEe, so it is a rarely needed material.

=== Copper ===

[[Copper Ore]] can be turned into [[Copper Ingot]] by smelting it in an [[Arc Furnace]] or [[Furnace]]. Copper Ore can also be combined with equal amounts [[Nickel Ore]] in the [[Furnace]] to create [[Constantan Ingot]].
=== Gold ===

[[Gold Ore]] can be turned into [[Gold Ingot]] by smelting it in a [[Furnace]] or [[Arc Furnace]].
Gold Ore can also be combined with equal amounts of [[Silver Ore]] in the [[Furnace]] to create [[Electrum Ingot]].
=== Iron ===

[[Iron Ore]] can be turned into an [[Iron Ingot]] by smelting it in an [[Arc Furnace]] or [[Furnace]]. It can be smelted into [[Steel Ingot]] using [[Coal Ore|Coal]] and [[Iron Ore]] in a Furnace (not Arc Furnace) that has [[Ice (Oxite)|Oxygen]] and gas from [[Ice (Volatiles)]].

=== Lead ===

[[Lead Ore]] can be smelted into [[Lead Ingot]]s by placing it in a [[Arc Furnace]] or [[Furnace]]. It can also be combined with equal amounts [[Iron Ore]] in the [[Furnace]] to create [[Solder Ingot]]s.
=== Nickel ===

[[Nickel Ore]] is one of ingame [https://stationeers-wiki.com/Main_Page#Ores Ores]. It can be turned into [[Nickel Ingot]] by smelting it in the [[Furnace]] or [[Arc Furnace]]. [[Nickel Ore]] can also be combined with equal amounts of [[Copper Ore]] in the [[Furnace]] to create [[Constantan Ingot]].
=== Silicon ===

[[Silicon Ore]] can be turn into [[Silicon Ingot]] using an [[Arc Furnace]] or [[Furnace]].
=== Silver ===

It can be turned into [[Silver Ingot]] by smelting it in the [[Furnace]] or [[Arc Furnace]]. [[Silver Ore]] can also be combined with equal amounts [[Gold Ore]] in the [[Furnace]] to create [[Electrum Ingot]].
= Reagent Mix =

Reagent Mix is mixture of different materials. The Reagent Mix chunk is the output of the [[Recycler]]. The Reagent mix can then be placed directly into the [[Centrifuge]] and will be sorted into basic ores and more Reagent mix if the mix contains any alloys or superalloys. These mixes that can not be sorted by the Centrifuge must be smelted in the [[furnace]] or [[Advanced_Furnace|Adv. Furnace]] to reclaim the alloys.
= Solid Fuel =
=== Coal ===
Coal can be used as low-level fuel to generate power in the [[Special:MyLanguage/Kit (Solid Generator)|Solid Fuel Generator]]. Coal can be combined with [[Special:MyLanguage/Iron Ore|Iron Ore]] in the [[Special:MyLanguage/Furnace|Furnace]] to create [[Special:MyLanguage/Steel Ingot|Steel Ingot]]. When burned, coal provides sizable 40 kJ of power per unit. However, burning it indoors can be a bad idea, as it generates pollution that is bad for the Player's health.
It can also be placed in the [[Special:MyLanguage/Reagent Processor|Reagent Processor]] to make [[Special:MyLanguage/Carbon Powder|Carbon Powder]], an item needed for black [[Special:MyLanguage/Spray Paint|Spray Paint]].
=== Uranium ===

Currently there doesn't seem to be a use for uranium.
Not even the [[Special:MyLanguage/Battery_Cell|Nuclear battery]] contains it in its recipe.
= Frozen Gas =
Frozen gases like the oxites, volatiles, and Ice will melt if the external temperature is above 0C. If the planet or moon you are on does not have an atmosphere, the sun will also be a source of heat and will melt these frozen gases if not inside a [[Mining_Belt]]
=== Oxite ===
Ice is extremely sensitive to temperature and will sublimate to gas even with minimal exposure to heat - such as being held in hand. Melting in a furnace will release [[Oxygen|O2]] and [[Nitrogen|N2]].
=== Volatiles ===
Volatile ice is extremely sensitive to temperature and will sublimate to gas even at the slightest exposure to heat - such as being held in hand.

=== Ice ===
Ice is extremely sensitive to temperature and will sublimate to gas even at the slightest exposure to heat at 0 degrees Celcius or above, including being held in hands.
= References =
<references group="last">
<ref name="ibReagent">A reagent mix cannot be mined and is gotten from a [[recycler]].</ref>
</references>
= Gallery =
<Gallery>
|caption=Ores as seen on the planet
|widths=160 | heights=160>
File:Cobalt_ore.jpg |alt1=[[#Cobalt|Cobalt Ore]] |[[#Cobalt|Cobalt Ore]]
File:Copper_ore.jpg |alt1=[[#Copper|Copper Ore]] |[[#Copper|Copper Ore]]
File:Gold_ore.jpg |alt1=[[#Gold|Gold Ore]] |[[#Gold|Gold Ore]]
File:Iron_ore.jpg |alt1=[[#Iron|Iron Ore]] |[[#Iron|Iron Ore]]
File:Lead_ore.jpg |alt1=[[#Lead|Lead Ore]] |[[#Lead|Lead Ore]]
File:Nickel_ore.jpg |alt1=[[#Nickel|Nickel Ore]] |[[#Nickel|Nickel Ore]]
File:Silicon_ore.jpg |alt1=[[#Silicon|Silicon Ore]] |[[#Silicon|Silicon Ore]]
File:Silver_ore.jpg |alt1=[[#Silver|Silver Ore]] |[[#Silver|Silver Ore]]
File:Coal_ore.jpg |alt1=[[#Coal|Coal Ore]] |[[#Coal|Coal Ore]]
File:Uranium_ore.jpg |alt1=[[#Uranium|Uranium Ore]] |[[#Uranium|Uranium Ore]]
File:Oxite_ore.jpg |alt1=[[#Oxite|Oxites]] |[[#Oxite|Oxites]]
File:Volatiles_ore.jpg |alt1=[[#Volatiles|Volatiles]] |[[#Volatiles|Volatiles]]
File:Ice_ore.jpg |alt1=[[#Ice|Ice]] |[[#Ice|Ice]]
</Gallery>
</translate>

Ore (Coal)

2023-11-08T04:33:29Z

Katree: Added description from Stationpedia

<languages/>
<translate>

{{Itembox
| name = Ore (Coal)
| image = [[File:{{#setmainimage:ItemCoalOre.png}}]]
| stacks = 50x
| usedwith =
*[[Special:MyLanguage/Kit (Solid Generator)|Solid Fuel Generator]]
*[[Special:MyLanguage/Furnace|Furnace]]
*[[Special:MyLanguage/Reagent Processor|Reagent Processor]]
| hashid = 1724793494
}}
{{Orebox
| name = Ore (Coal)
| image = [[File:Coal_ore.jpg]]
}}

== Description ==
[[Special:MyLanguage/Ore (Coal)|Ore (Coal)]] is a type of [[Ore]] that can be burned in a [[Solid Fuel Generator|Generator (Solid Fuel)]] for energy, smelted in a [[Furnace]] to create alloys, or used in a [[Reagent Processor]] to make [[Spray Paint (Black)]].

== Obtaining == 


[[Special:MyLanguage/Ore (Coal)|Ore (Coal)]] is mined throughout the surface of planets, moons, or asteroids using a [[Special:MyLanguage/Mining Drill|Mining Drill]].

== Processing == 


Coal can be used as low-level fuel to generate power in the [[Special:MyLanguage/Kit (Solid Generator)|Solid Fuel Generator]]. Coal can be combined with [[Special:MyLanguage/Iron Ore|Iron Ore]] in the [[Special:MyLanguage/Furnace|Furnace]] to create [[Special:MyLanguage/Steel Ingot|Steel Ingot]].

When burned in a [[Special:MyLanguage/Solid Fuel Generator|Solid Fuel Generator]], coal provides sizable 200 kJ of power per unit (20 kW for 10 ticks or 40 kJ/S for 5 seconds). However, burning it indoors can be a bad idea, as it generates pollution that is bad for the Player's health. Specifically, each unit of coal burned produces:
{|
|3 mol
|[[Pollutant]]
|-
|10 mol
|[[Carbon Dioxide]]
|}


It can also be placed in the [[Special:MyLanguage/Reagent Processor|Reagent Processor]] to make [[Special:MyLanguage/Carbon Powder|Carbon Powder]], an item needed for black [[Special:MyLanguage/Spray Paint|Spray Paint]].

</translate>

Ore

2023-11-08T04:22:26Z

Katree: Creating a catch all page for all ores based on how Stationpedia is structured.

== Description ==
These are items that are mined and can often be smelted. You can also get mixed ore by recycling items in the [[Recycler]] and then passing it through the [[Centrifuge]] which will break it down into ore for smelting.

There are some ores that will melt when exposed to sunlight or heat and produce [[Gas|gases]]. For example [[Ice (Water)]] melts into [[Water]] and [[Oxygen]]. Be careful to keep these out of heat or sunlight until you actually want them to melt.

== Ores ==
<table>
<tr>
<td>
*[[Biomass]]
*[[Charcoal]]
*[[Ore (Coal)]]
*[[Ore (Cobalt)]]
*[[Ore (Copper)]]
*[[Ore (Gold)]]
*[[Ore (Iron)]]
</td>
<td>
*[[Ore (Lead)]]
*[[Ore (Nickel)]]
*[[Ore (Silicon)]]
*[[Ore (Silver)]]
*[[Ore (Uranium)]]
*[[Reagent Mix]]
</td>
</table>

== Frozen Ores ==
*[[Ice (Water)]]
*[[Ice (Nitrice)]]
*[[Ice (Oxite)]]
*[[Ice (Volatiles)]]

== Pure Ices ==
<table>
<tr>
<td>
*[[Pure Ice Water]]
*[[Pure Ice Carbon Dioxide]]
*[[Pure Ice Nitrogen]]
*[[Pure Ice NitrousOxide]]
*[[Pure Ice Oxygen]]
*[[Pure Ice Pollutant]]
*[[Pure Ice Volatiles]]
</td>
<td>
*[[Pure Ice Liquid Carbon Dioxide]]
*[[Pure Ice Liquid Nitrogen]]
*[[Pure Ice Liquid Nitrous]]
*[[Pure Ice Liquid Oxygen]]
*[[Pure Ice Liquid Pollutant]]
*[[Pure Ice Liquid Volatiles]]
*[[Pure Ice Steam]]
</td>
</table>

Kit (Autominer Small)

2023-11-08T03:54:42Z

Katree:

{{Itembox
| name = Kit (Autominer Small)
| image =
| createdwith = [[Electronics Printer]] '''Mk2'''
| cost = 15g [[Copper]], 100g [[Steel]], 50g [[Electrum]], 15g [[Invar]]
}}
{{Structurebox
| name = Autominer (Small)
| image =
| power_usage = 200W
| placed_with_item = [[Kit (Autominer Small)]]
| placed_on_grid =
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Autominer Small)]]
}}

== Description == 
The [[Recurso]] SquareDig autominer is a structure that when built will mine a vertical 2x2 shaft until it hits bedrock. The autominer can be connected with a chute system, and is controllable by a logic network. Note that the autominer outputs more [[Ore|ore]] than than a conventional [[Mining Drill]] over the same area.

== Building States ==
{| class="wikitable"
|-
! State # !! Tool !! Material
|-
| 1 || [[Welding Torch]] || 3 x [[Electronic Parts]]
|-
| 2 || [[Welding Torch]] || 3 x [[Iron Sheets]]
|-
| 3 || [[Welding Torch]] || 4 x [[Steel Sheets]]
|}

== Operation ==
The unit is a platform with no power source and it is simply going to dump it's output. You will likely need a few completed frames, a power generator, wire to connect it and something like a hole to catch the ore.

== Notes ==
Ices mined this way will melt if the atmosphere around the miner is warm. Volatiles will catch fire on Mars during the day but won't on Europa because of the temperature difference.
It would be best to redirect the miner's output with chutes to an enclosed space and use an active vent to pump the gas inside a portable tank

Kit (Autominer Small)

2023-11-08T03:50:12Z

Katree: Overhauled page with some updated content from the ingame Stationpedia

{{Itembox
| name = Kit (Auto Miner Small)
| image =
| createdwith = [[Electronics Printer]] '''Mk2'''
| cost = 15g [[Copper]], 100g [[Steel]], 50g [[Electrum]], 15g [[Invar]]
}}
{{Structurebox
| name = Auto Miner Small
| image =
| power_usage = 200W
| placed_with_item = [[Kit (Auto Miner Small)]]
| placed_on_grid =
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Auto Miner Small)]]
}}

== Description == 
The [[Recurso]] SquareDig autominer is a structure that when built will mine a vertical 2x2 shaft until it hits bedrock. The autominer can be connected with a chute system, and is controllable by a logic network. Note that the autominer outputs more [[Ore|ore]] than than a conventional [[Mining Drill]] over the same area.

== Building States ==
{| class="wikitable"
|-
! State # !! Tool !! Material
|-
| 1 || [[Welding Torch]] || 3 x [[Electronic Parts]]
|-
| 2 || [[Welding Torch]] || 3 x [[Iron Sheets]]
|-
| 3 || [[Welding Torch]] || 4 x [[Steel Sheets]]
|}

== Operation ==
The unit is a platform with no power source and it is simply going to dump it's output. You will likely need a few completed frames, a power generator, wire to connect it and something like a hole to catch the ore.

== Notes ==
Ices mined this way will melt if the atmosphere around the miner is warm. Volatiles will catch fire on Mars during the day but won't on Europa because of the temperature difference.
It would be best to redirect the miner's output with chutes to an enclosed space and use an active vent to pump the gas inside a portable tank

Kit (Auto Miner Small)

2023-11-08T03:20:00Z

Katree: Katree moved page Kit (Auto Miner Small) to Kit (Autominer Small): Renamming to match the name in the game and to match other redirects on the wiki.

#REDIRECT [[Kit (Autominer Small)]]

Kit (Autominer Small)

2023-11-08T03:20:00Z

Katree: Katree moved page Kit (Auto Miner Small) to Kit (Autominer Small): Renamming to match the name in the game and to match other redirects on the wiki.

{{Itembox
| name = Kit (Auto Miner Small)
| image =
| createdwith = [[Electronics Printer]] '''Mk2'''
| cost = 15g [[Copper]], 100g [[Steel]], 50g [[Electrum]], 15g [[Invar]]
}}
{{Structurebox
| name = Auto Miner Small
| image =
| power_usage = 200W
| placed_with_item = [[Kit (Auto Miner Small)]]
| placed_on_grid =
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Auto Miner Small)]]
}}

== Description == 
Used to mine ores in the highlighted area in front of it, down to bedrock. It uses 200W and it can be easily powered by an APC with a large battery.

Note that ices mined this way will melt if the atmosphere around the miner is warm. Volatiles will catch fire on Mars during the day but won't on Europa because of the temperature difference.
It would be best to redirect the miner's output with chutes to an enclosed space and use an active vent to pump the gas inside a portable tank

== Construction ==
3x Electronic Parts
3x Iron Sheets
4x Steel Sheets

== Operation ==
The unit is a platform with no power source and it is simply going to dump it's output. You will likely need a few completed frames, a power generator, wire to connect it and something like a hole to catch the ore.

Kit (Liquid Drain)

2023-11-06T05:16:00Z

Katree:

<languages/>
<translate>
[[Category:Machines]]
{{Itembox
| name = Kit (Liquid Drain)
| image = [[File:Kit(Liquid Drain).png]]
| createdwith = [[Hydraulic Pipe Bender]]
| cost = 5g [[Iron]], 2g [[Copper]], 500 [[Energy]]
| constructs = [[Active Inlet Outlet]], [[Passive Liquid Inlet]], [[Passive Liquid Drain]]
| logic =
}}
==Description==
This kit produces the following:
* [[Active Inlet Outlet]]
* [[Passive Liquid Inlet]]
* [[Passive Liquid Drain]]

{{Data Network Header}}

</translate>