Stationeers Community Wiki - User contributions [en]

Kit (Padded Wall)

2022-05-17T13:39:50Z

Mahsaap: add pressure rating

[[Category:Construction]][[Category:Structures]]
{{Itembox
| name = Padded Walls
| image = [[File:ItemKitWall.png]]
| stacks = 30
| createdwith = [[Fabricator]]
| cost = 1g [[Steel]]
}}

== Description ==

The Padded Wall Kit only builds the frame, you need a [[Steel Sheets|Steel Sheet]] to complete the wall. It is not airtight until completed.
The properties and behavior are like [[Composite Walls]]. However, they offer six different looks.

The receptacles of the Light Fitting and Arch Lights Fitting variants will align with [[Kit (Lights)|wall lights]]. For Light Fitting (single light), use the "Long" light. For Arch Lights Fitting (double lights), use "Long Angled" lights, placed at the top and bottom of the wall and rotated 180° from one another.

The Arch Vent variant is only cosmetic at this time. It does not include a pipe fitting for gas flow. You can place a functioning vent behind the padding, but this is true for all Padded Wall variants. However, the Arch Vent variant does allow the functional vent to be ''visible'' behind the grille, if it is placed correctly.


==Characteristics==
* Withstand up to 300kPa

[[File:KitPaddedWallVariations.png|800px|center]]

Pipes

2022-05-13T13:49:26Z

Mahsaap: changed layout to the same as cables

Sensors

2022-05-10T16:03:11Z

Mahsaap: Add variant structure boxes for gas and motion

<languages />
<translate>
= Description = 

{{Itembox
| name = Kit (Sensors)
| image = {{{image|[[File:ItemSensorKit.png]]}}}
| stacks = 5x
| constructs = Daylight, Motion or Gas Sensor
| createdwith = [[Electronics Printer]], [[Fabricator]], [[Hydraulic Pipe Bender]]
| cost = 3g [[Iron]], 1g [[Gold]], 1g [[Copper]] <br><small>Hydraulic Pipe Bender has an altered recipe 1g iron instead of 3g</small>
}}

[[Sensors]] are used to detect different conditions of the world. They can be read by the [[Logic]] [[Computer]]s as well as used when correctly configured by some devices, such as a [[Console]] with a [[Circuitboard (Airlock Control)]].

<gallery>
File:Daylight_sensor.jpg|In-game view of daylight sensor
File:Gas_sensor.jpg|In-game view of gas sensor
File:Motion_sensor.jpg|In-game view of motion sensor
</gallery>

= Daylight Sensor = 

{{Structurebox
| name = Daylight Sensor
| image = [[File:Daylight_sensor.jpg]]
| placed_with_item = [[Kit (Sensors)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Sensors)]]
}}
{{Structurebox
| name = Gas Sensor
| image = [[File:ItemGasSensor.png]]
| placed_with_item = [[Kit (Sensors)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Sensors)]]
}}
{{Structurebox
| name = Motion Sensor
| image = [[File:ItemMotionSensor.png]]
| placed_with_item = [[Kit (Sensors)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Sensors)]]
}}

The daylight sensor reports whether the sun hits the large grid the sensor is in, as well as the solar angle. Looking at the sensor will provide a tool-tip readout of this information, even when not connected to the network. The orientation of the daylight sensor is important, it will read different angle values depending on the orientation.

'''Update''': While the <kbd>Mode</kbd> and <kbd>SolarAngle</kbd> properties described below are still available, they are being deprecated in favor of <kbd>Horizontal</kbd> and <kbd>Vertical</kbd> data properties, returning the same as their <kbd>Mode</kbd> counterparts.

The daylight sensor has a <kbd>Mode</kbd> property which can be set with logic writer and memory chip, 0 = default, 1 = horizontal, 2 = vertical. Other values will throw an index-out-of-range error in console if you mouse-over the sensor. Each mode defines a specific behavior for how the solar angle is calculated.

== Modes ==
In default mode, the sensor will return the absolute value of the angle formed by the source of light and the normal vector of the sensor (towards which the grey/green part is facing). 0 means the source of light is facing to the sensor, 90 means it is aligned with the surface the sensor was laid on, and 180 means the source of light is in the back of the sensor. The angle is always a positive value between 0 and 180.

[[File:Daylight sensor horizontal.png|200x150px|thumb|daylight sensor in horizontal mode]]
In horizontal mode, the sensor will return the angle formed by the reference vector (opposites the network connector) and the projection of the source of light on the surface the sensor was laid on. Positive values designate angles counter-clockwise when facing the sensor. The angle can be negative, ranging between -180 and +180.
[[File:Daylight sensor vertical.png|200x150px|thumb|daylight sensor in vertical mode]]
In vertical mode, the sensor measures the angle between the normal of the surface the sensor was laid on and the position of the sun.

=== Notes ===

Solar panel work using clockwise reference angles, which means depending of the situation you may have to invert the values returned by sensors' horizontal or vertical modes.

The sensor always reports an angle to a logic reader at all times.

See https://stationeers-wiki.com/Solar_Logic_Circuits_Guide for more solar panel logic discussion.

=== Examples ===
On the moon/space :
* If the daylight sensor is fixed on the floor, it will report 90 degrees at sunrise, up to 0 degrees at noon, back to 90 degrees at sunset, to 180 degrees at midnight, and back to 90 at sunrise.
* If fixed on a ceiling the cycle will be opposite, i.e.: 90 -> 180 -> 90 -> 0 -> 90.
* If fixed to an east facing wall, the cycle from sunrise is: 0 -> 90 -> 180 -> 90 -> 0.
* If fixed to a west facing wall, the cycle is opposite, i.e.: 180 -> 90 -> 0 -> 90 -> 180.
* If fixed to a north or south facing wall it will stay at 90 degrees all the time.

Other :
* If you lay a sensor on the ground, facing upwards, connector towards south,configured in horizontal mode, it will work like a compass with 0 = north, 90 = east, 180 = south and -90 = west

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Mode || || 0 = Default, 1 = Horizontal, 2 = Vertical (Warning! In IC Horizontal and Vertical are the other way around for some reason.)
|-
| Activate || ||
|-
| On || ||
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Mode || || 0 = Default, 1 = Horizontal, 2 = Vertical (Warning! In IC Horizontal and Vertical are the other way around for some reason.)
|-
| Horizontal || || Same as <kbd>SolarAngle</kbd> reported for <kbd>Horizontal</kbd> mode
|-
| Vertical || || Same as <kbd>SolarAngle</kbd> reported for <kbd>Vertical</kbd> mode
|-
| Activate || || 0 = Sensor not in sunlight, 1 = Sensor in sunlight
|-
| SolarAngle || || Probably soon deprecated in favor of <kbd>Horizontal</kbd> and <kbd>Vertical</kbd>
|-
| On || ||
|}

= Motion Sensor =

{{Structurebox
| name = Motion Sensor
| image = [[File:ItemMotionSensor.png]]
| power_usage = 10W
| placed_with_item = [[Kit (Sensors)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Sensors)]]
}}

The motion sensor activates when a player or object enters the large grid square where the sensor is, and it will deactivate when no more players or objects are in the area.

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|}

= Gas Sensor =

{{Structurebox
| name = Gas Sensor
| image = [[File:ItemGasSensor.png]]
| power_usage = 10W
| placed_with_item = [[Kit (Sensors)]]
| placed_on_grid = Small Grid, On Frames
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Sensors)]]
}}

The gas sensor will report information about the gas in the current atmosphere, such as pressure, contents and temperature.

Note: Temperature is given in Kelvin, while your suit gives a readout in Celsius.

Celsius + 273.15 = Kelvin

{{Data Network Header}}

=== Data Parameters ===
The gas sensor has no Input parameters, it's a read only device.

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Pressure || Float || In kPa
|-
| Temperature || Float || In Kelvin
|-
| RatioOxygen || Float || The ratio of oxygen in the atmosphere. A value between 0 (no oxygen at all, or 0%) and 1 ( pure oxygen atmosphere, or 100%)
|-
| RatioCarbonDioxide || Float ||
|-
| RatioNitrogen || Float ||
|-
| RatioNitrousOxide || Float ||
|-
| RatioPollutant || Float ||
|-
| RatioVolatiles || Float ||
|-
| RatioWater || Float ||
|-
|Combustion
|}
</translate>

Pipes

2022-05-10T15:58:58Z

Mahsaap: Add Pressure limit beside Volume

<languages />
<translate>

[[Category:Atmospherics]]
{{Itembox
| name = Kit (Pipe)
| image = [[File:{{#setmainimage:ItemKitPipe.png}}]]
| cost = 0.5g [[Iron]]
| stacks = Yes, 20
| volume = 100L, 60Mpa
| createdwith = [[Hydraulic Pipe Bender]], [[Hydraulic Pipe Bender Mk. II]]
}}
{{Structurebox
| name = Pipe (Straight)
| image = [[File:{{#setmainimage:ItemPipeStraight.png}}]]
| placed_with_item = [[Kit (Pipe)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]]
}}
{{Structurebox
| name = Pipe (Corner)
| image = [[File:{{#setmainimage:ItemPipeCorner.png}}]]
| placed_with_item = [[Kit (Pipe)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]]
}}
{{Structurebox
| name = Pipe (T-Junction)
| image = [[File:{{#setmainimage:ItemPipeTJunction.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 2
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 2
}}
{{Structurebox
| name = Pipe (3-Way Junction)
| image = [[File:{{#setmainimage:ItemPipeCrossJunction3.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 2
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 2
}}
{{Structurebox
| name = Pipe (4-Way Junction)
| image = [[File:{{#setmainimage:ItemPipeCrossJunction.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 3
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 3
}}
{{Structurebox
| name = Pipe (5-Way Junction)
| image = [[File:{{#setmainimage:ItemPipeCrossJunction5.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 4
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 4
}}
{{Structurebox
| name = Pipe (6-Way Junction)
| image = [[File:{{#setmainimage:ItemPipeCrossJunction6.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 5
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 5
}}
Pipes are used to transport gas. Pipes are one of the possible types of inputs/outputs from a structure (the others being [[Cables]] and [[Chutes]]).

=== Tips === 


* Pipes can store some gas inside of them, which can be used with small airlocks to store gas when depressurizing
* Pipes will burst if the pressure differential between the inside pressure and outside atmosphere is greater than 60,795KPa (60MPa) (plus a random check to allow for short bursts over this limit)
* Pipes will be stressed (make a noise) when the pressure difference between inside and outside the pipe is greater than 48,636kPa.
* A contiguous pipe (not interrupted by valves, regulators, pumps etc.) of any length, will always have the same pressure, temperature and mixture over its entire length. No matter at what point of the pipe you're introducing new gases into the pipe, they will instantly and evenly "average out" over the entire pipe.
</translate>

Pipes

2022-05-10T15:56:59Z

Mahsaap: Added all variants in the kit, Removed Fabricator and added MK2 Pipe Bender

<languages />
<translate>

[[Category:Atmospherics]]
{{Itembox
| name = Kit (Pipe)
| image = [[File:{{#setmainimage:ItemKitPipe.png}}]]
| cost = 0.5g [[Iron]]
| stacks = Yes, 20
| volume = 100L
| createdwith = [[Hydraulic Pipe Bender]], [[Hydraulic Pipe Bender Mk. II]]
}}
{{Structurebox
| name = Pipe (Straight)
| image = [[File:{{#setmainimage:ItemPipeStraight.png}}]]
| placed_with_item = [[Kit (Pipe)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]]
}}
{{Structurebox
| name = Pipe (Corner)
| image = [[File:{{#setmainimage:ItemPipeCorner.png}}]]
| placed_with_item = [[Kit (Pipe)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]]
}}
{{Structurebox
| name = Pipe (T-Junction)
| image = [[File:{{#setmainimage:ItemPipeTJunction.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 2
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 2
}}
{{Structurebox
| name = Pipe (3-Way Junction)
| image = [[File:{{#setmainimage:ItemPipeCrossJunction3.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 2
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 2
}}
{{Structurebox
| name = Pipe (4-Way Junction)
| image = [[File:{{#setmainimage:ItemPipeCrossJunction.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 3
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 3
}}
{{Structurebox
| name = Pipe (5-Way Junction)
| image = [[File:{{#setmainimage:ItemPipeCrossJunction5.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 4
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 4
}}
{{Structurebox
| name = Pipe (6-Way Junction)
| image = [[File:{{#setmainimage:ItemPipeCrossJunction6.png}}]]
| placed_with_item = [[Kit (Pipe)]] x 5
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Pipe)]] x 5
}}
Pipes are used to transport gas. Pipes are one of the possible types of inputs/outputs from a structure (the others being [[Cables]] and [[Chutes]]).

=== Tips === 


* Pipes can store some gas inside of them, which can be used with small airlocks to store gas when depressurizing
* Pipes will burst if the pressure differential between the inside pressure and outside atmosphere is greater than 60,795KPa (60MPa) (plus a random check to allow for short bursts over this limit)
* Pipes will be stressed (make a noise) when the pressure difference between inside and outside the pipe is greater than 48,636kPa.
* A contiguous pipe (not interrupted by valves, regulators, pumps etc.) of any length, will always have the same pressure, temperature and mixture over its entire length. No matter at what point of the pipe you're introducing new gases into the pipe, they will instantly and evenly "average out" over the entire pipe.
</translate>