Stationeers Community Wiki - User contributions [en]

Circuitboard (Air Control)

2018-02-17T04:06:47Z

OddGod: elaborated on some information

<languages />
<translate>

{{Itembox
| name = Circuitboard (Air Control)
| image = [[File:{{#setmainimage:Circuitboard Air control.jpg}}]]
| stacks = ??
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Copper Ingot|Copper]], 5g [[Gold Ingot|Gold]]
}}

== Description == 
[[Circuitboard (Air Control)]] can be placed inside of a [[Console]] to form a Air Control Console. It is one of many [[Circuitboard|Circuitboards]] that can be fitted to a Console.


{{Structurebox
| name = Console (Air Control)
| image = [[File:Console Air control.jpg|thumb]]
| placement = Small Grid
}}

== Air Control == 
The Air Control circuitboard in a console can be used to control active vents and display information about the environment.

== Setup == 
Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].

The setup mode has three options: Pressure, Draught, and Offline. For basic functionality, at least one [[Gas Sensor]] and [[Active Vent]] should be selected on the setup screen.


{{Structurebox
| name = Console (Air Control) in setup mode
| image = [[File:Console Air control setup.jpg|thumb]]
| placement = Small Grid
}}

== Operation == 

Pressure mode with automatically try to maintain pressure at 100kPa, toggling the active vent between inward and outward as needed and turning off when the target pressure is reached.

Draught mode tries to maintain pressure at 100kpa but doesn't turn off when the target pressure is reached. The vent will internally toggle between inward and outward airflow to continiously circulate gas between the pipe and room.

Offline disables the active vent.


{{Structurebox
| name = Manual Operation Disabled
| image = [[File:Composite Air disabled.jpg|thumb]]
| placement = Small Grid
}}
</translate>

Circuitboard (Air Control)

2018-02-17T03:53:59Z

OddGod: updating info a bit more

<languages />
<translate>

{{Itembox
| name = Circuitboard (Air Control)
| image = [[File:{{#setmainimage:Circuitboard Air control.jpg}}]]
| stacks = ??
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Copper Ingot|Copper]], 5g [[Gold Ingot|Gold]]
}}

== Description == 
[[Circuitboard (Air Control)]] can be placed inside of a [[Console]] to form a Air Control Console. It is one of many [[Circuitboard|Circuitboards]] that can be fitted to a Console.


{{Structurebox
| name = Console (Air Control)
| image = [[File:Console Air control.jpg|thumb]]
| placement = Small Grid
}}

== Air Control == 
The Air Control circuitboard in a console can be used to control active vents and display information about the environment.

== Setup == 
Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].

The setup mode has three options: Pressure, Draught, and Offline. For basic functionality, at least one [[Gas Sensor]] and [[Active Vent]] should be selected on the setup screen.


{{Structurebox
| name = Console (Air Control) in setup mode
| image = [[File:Console Air control setup.jpg|thumb]]
| placement = Small Grid
}}

== Operation == 

Pressure mode with automatically try to maintain pressure at 100kPa, toggling the active vent between inward and outward.

Draught mode fills the room to 100kpa but then keep air flowing both ways.

Offline disables the active vent.


{{Structurebox
| name = Manual Operation Disabled
| image = [[File:Composite Air disabled.jpg|thumb]]
| placement = Small Grid
}}
</translate>

Circuitboard (Air Control)

2018-02-17T02:42:48Z

OddGod: updated info about setup mode

<languages />
<translate>

{{Itembox
| name = Circuitboard (Air Control)
| image = [[File:{{#setmainimage:Circuitboard Air control.jpg}}]]
| stacks = ??
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Copper Ingot|Copper]], 5g [[Gold Ingot|Gold]]
}}

== Description == 
[[Circuitboard (Air Control)]] can be placed inside of a [[Console]] to form a Air Control Console. It is one of many [[Circuitboard|Circuitboards]] that can be fitted to a Console.


{{Structurebox
| name = Console (Air Control)
| image = [[File:Console Air control.jpg|thumb]]
| placement = Small Grid
}}

== Air Control == 
The Air Control circuitboard in a console can be used to control active vents and display information about the environment.

== Setup == 
Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].

The setup mode has three options to control one or more active vents in combination with a gas sensor: Pressurize, Draugh, and Offline.


{{Structurebox
| name = Console (Air Control) in setup mode
| image = [[File:Console Air control setup.jpg|thumb]]
| placement = Small Grid
}}

== Operation == 

Pressurize mode sets the selected active vent to automatically output gas until about 100kPa of pressure, once this threshold is reached it turns the active vent off.

Draugh mode sets the active vent to intake air.

Offline disables the active vent.


{{Structurebox
| name = Manual Operation Disabled
| image = [[File:Composite Air disabled.jpg|thumb]]
| placement = Small Grid
}}
</translate>

Circuitboard (Air Control)

2018-02-17T02:41:47Z

OddGod: updating info

<languages />
<translate>

{{Itembox
| name = Circuitboard (Air Control)
| image = [[File:{{#setmainimage:Circuitboard Air control.jpg}}]]
| stacks = ??
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Copper Ingot|Copper]], 5g [[Gold Ingot|Gold]]
}}

== Description == 
[[Circuitboard (Air Control)]] can be placed inside of a [[Console]] to form a Air Control Console. It is one of many [[Circuitboard|Circuitboards]] that can be fitted to a Console.


{{Structurebox
| name = Console (Air Control)
| image = [[File:Console Air control.jpg|thumb]]
| placement = Small Grid
}}

== Air Control == 
The Air Control circuitboard in a console can be used to control active vents and display information about the environment.

== Setup == 
Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].


{{Structurebox
| name = Console (Air Control) in setup mode
| image = [[File:Console Air control setup.jpg|thumb]]
| placement = Small Grid
}}

== Operation == 

Pressurize mode sets the selected active vent to automatically output gas until about 100kPa of pressure, once this threshold is reached it turns the active vent off.

Draugh mode sets the active vent to intake air.

Offline disables the active vent.


{{Structurebox
| name = Manual Operation Disabled
| image = [[File:Composite Air disabled.jpg|thumb]]
| placement = Small Grid
}}
</translate>

Circuitboard (Air Control)

2018-02-17T02:36:28Z

OddGod: updated info about setup mode

<languages />
<translate>

{{Itembox
| name = Circuitboard (Air Control)
| image = [[File:{{#setmainimage:Circuitboard Air control.jpg}}]]
| stacks = ??
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Copper Ingot|Copper]], 5g [[Gold Ingot|Gold]]
}}

== Description == 
[[Circuitboard (Air Control)]] can be placed inside of a [[Console]] to form a Air Control Console. It is one of many [[Circuitboard|Circuitboards]] that can be fitted to a Console.


{{Structurebox
| name = Console (Air Control)
| image = [[File:Console Air control.jpg|thumb]]
| placement = Small Grid
}}

== Air Control == 
The Air Control circuitboard in a console can be used to control active vents and display information about the environment.

== Setup == 
Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].


{{Structurebox
| name = Console (Air Control) in setup mode
| image = [[File:Console Air control setup.jpg|thumb]]
| placement = Small Grid
}}

== Manual Operation == 
The setup mode has three options to control one or more active vents in combination with a gas sensor: Pressurize, Draugh, and Offline.

Pressurize mode sets the selected active vent to automatically output gas until about 100kPa of pressure, once this threshold is reached it turns the active vent off.

Draugh mode sets the active vent to intake air.

Offline disables the active vent.


{{Structurebox
| name = Manual Operation Disabled
| image = [[File:Composite Air disabled.jpg|thumb]]
| placement = Small Grid
}}
</translate>

Circuitboard (Air Control)

2018-02-17T02:22:09Z

OddGod: updated basic information about the item

<languages />
<translate>

{{Itembox
| name = Circuitboard (Air Control)
| image = [[File:{{#setmainimage:Circuitboard Air control.jpg}}]]
| stacks = ??
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 5g [[Copper Ingot|Copper]], 5g [[Gold Ingot|Gold]]
}}

== Description == 
[[Circuitboard (Air Control)]] can be placed inside of a [[Console]] to form a Air Control Console. It is one of many [[Circuitboard|Circuitboards]] that can be fitted to a Console.


{{Structurebox
| name = Console (Air Control)
| image = [[File:Console Air control.jpg|thumb]]
| placement = Small Grid
}}

== Air Control == 
The Air Control circuitboard in a console can be used to control active vents and display information about the environment.

== Setup == 
Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].


{{Structurebox
| name = Console (Air Control) in setup mode
| image = [[File:Console Air control setup.jpg|thumb]]
| placement = Small Grid
}}

== Manual Operation == 
The setup mode also allows for enabling/disabling manual operation of the vents.


{{Structurebox
| name = Manual Operation Disabled
| image = [[File:Composite Air disabled.jpg|thumb]]
| placement = Small Grid
}}
</translate>

Circuitboard (Air Control)

2018-02-14T19:48:00Z

OddGod: Created a basic page for the Air Control circuitboard

Circuitboard

2018-02-14T19:41:46Z

OddGod: capitalization correction on 'Air control' to 'Air Control'

<languages />
<translate>


Circuitboards are used in [[Console|Consoles]]. Their functionality changes depending on the Circuitboard. They can be produced in the [[Electronics Printer]] or [[Fabricator]].


They all cost 5g [[Gold]] and 5g [[Copper]] except for Gas Display and Airlock Control, which cost an additional 1g [[Iron]].

===== List ===== 


{|
! Name
! Connected Requirements
! Description
|-
| [[Circuitboard (Air Control)|Air Control]]
| 2 x Active Vent, 1 x Gas Sensor
| Features 2 modes of operation: Pressure and Draugh
|-
| [[Circuitboard (Airlock Control)|Airlock Control]]
| 2 x [[Airlock]], 1 x [[Active Vent]], 1 x [[Sensors|Gas Sensor]]
| Cycles between External pressure (0 kPa) and Internal pressure (100 kPa)<br /><br />'''Warning - if the [[Active Vent]] runs out of air, the pressurization cycle will not complete''' - you can escape by pressing yellow '''CANCEL pressurize''' buuton on Console, or by using the [[Data Disk]] on the [[Console]], removing an [[Airlock]] from the config, and then manually opening it (or by deconstructing an unlinked airlock, or a nearby wall)
|-
| Camera Display
| 1 x [[Sensors|Gas Sensor]]
| Behaves like a gas display
|-
| [[Circuitboard (Door Control)|Door Control]]
| Any number of [[Glass Doors]] or [[Blast Doors]]
| Toggles connected doors between closed and opened
|-
| [[Circuitboard (Gas Display)|Gas Display]]
| 1 x [[Sensors|Gas Sensor]]
| Can switch between Pressure & Temperature display
|-
| [[Circuitboard (Mode Control)|Mode Control]]
| Any device connected in the same network as the console
| The selected devices are switched between operating modes.
|-
| [[Circuitboard (Power Control)|Power Control]]
| Any device connected in the same network as the console
| The selected devices are powered on/off. Used to remotely start or stop devices.
|-
| [[Circuitboard (Ship Display)|Ship Display]]
| ? 
| ?
|-
| [[Circuitboard (Solar Control)|Solar Control]]
| N x [[Solar Panel]]
| Controls a group of solar panels in synchronized way.
|}
</translate>

Furnace

2018-02-10T17:15:43Z

OddGod: Added a refrence to the furnace creating reagent on failed smelting operations.

<languages />
<translate>
[[Category:Machines]]
{{Itembox
| name = Kit (Furnace)
| image = [[File:ItemKitFurnace.png]]
| createdwith = [[Autolathe]], [[Fabricator]]
| cost = 30g [[Iron]], 10g [[Copper]]
| volume = 250 L
| logic =
* Open
* Pressure
* Temperature
* Lock
* Setting
* Reagents
* RatioOxygen
* RatioCarbonDioxide
* RatioNitrogen
* RatioPollutant
* RatioVolatile
* RatioWater
* Maximum
* Ratio
* ImportQuantity
* ImportSlotOccupant
* ExportQuantity
* ExportSlotOccupant

}}
{{Structurebox
| name = Furnace
| image = [[File:Furnace.jpg|thumb]]
| placement = Small Grid
}}

== Description ==
Used to smelt ingots and alloys using an oxygen/volatile gas mix. [[Ice (Oxite)]] and [[Ice (Volatiles)]] can be manually input directly in the furnace in order to create crude gas mixtures, or to be directly extracted as an easy trick for melting the ice.

If the contents of the furnace are ejected without reaching the required temperature and pressure for smelting, they'll come out as [[Reagent]] which can be processed in a [[Centrifuge]] to recover the raw ores.

== Recipes ==

While smelting steel is easily achieved with ice, other recipes usually require a working piping setup. This can be done by separating gases into tanks using atmospheric units and piping individual gases through a mixer and a [[Pressure Regulator]] or a [[Pipe Volume Pump]] connected to the furnace input. Output should also be extracted and vented/recycled through a backpressure regulator to keep furnace pressure in check. The optimal gas mix that burns completely is 1 part (33.3%) oxygen to 2 parts (66.6%) volatiles, other mixes would also work but leave you with leftover oxygen or volatiles depending on the percentages used. It could also result in lower temperature if that is desired, but you could also use a volume pump with a lower fuel input setting.

{| class="wikitable"
! colspan="1" rowspan="2" | Item
! colspan="2" rowspan="1" style="text-align:center;" | Pressure (kPa)
! colspan="2" rowspan="1" style="text-align:center;" | Temp (K)
! colspan="2" rowspan="1" style="text-align:center;" | Ingredients
! rowspan="2" | Notes
|-
!Min
!Max
!Min
!Max
!Ratio
!Ore
|-
| Lead
| colspan="1" rowspan="7" style="text-align:right;" | 100
| colspan="1" rowspan="7" style="text-align:right;" | 100 000
| style="text-align:right;" | 300
| colspan="1" rowspan="7" style="text-align:right;" | 100 000
| style="text-align:center;" | 1
| Lead
|
|-
| Gold
| style="text-align:right;" | 600
| style="text-align:center;" | 1
| Gold
|
|-
| Copper
| style="text-align:right;" | 600
| style="text-align:center;" | 1
| Copper
|
|-
| Silver
| style="text-align:right;" | 600
| style="text-align:center;" | 1
| Silver
|
|-
| Nickel
| style="text-align:right;" | 800
| style="text-align:center;" | 1
| Nickel
|
|-
| Iron
| style="text-align:right;" | 900
| style="text-align:center;" | 1
| Iron
|
|-
| Silicon
| style="text-align:right;" | 900
| style="text-align:center;" | 1
| Silicon
|
|-
|[[Solder Ingot|Solder]]
| style="text-align:right;" | 300
| style="text-align:right;" | 3 500
| style="text-align:right;" | 300
| style="text-align:right;" | 2 000
| style="text-align:center;" | 1:1
| Iron:Lead
| Can be achieved by dropping 2 oxite and 1 volatile
|-
|[[Steel Ingot|Steel]]
| style="text-align:right;" | 100
| style="text-align:right;" | 100 000
| style="text-align:right;" | 600
| style="text-align:right;" | 100 000
| style="text-align:center;" | 3:1
| Iron:Carbon(Coal)
| Can easily be achieved by just dropping 1 oxite and 2 volatiles
|-
|[[Electrum Ingot|Electrum]]
| style="text-align:right;" | 800
| style="text-align:right;" | 2 400
| style="text-align:right;" | 700
| style="text-align:right;" | 10 000
| style="text-align:center;" | 1:1
| Gold:Silver
| Can be achieved by just dropping 1 oxite and 2 volatiles
|-
|[[Invar Ingot|Invar]]
| style="text-align:right;" | 6 000
| style="text-align:right;" | 7 000
| style="text-align:right;" | 1 200
| style="text-align:right;" | 1 500
| style="text-align:center;" | 1:1
| Iron:Nickel
| Can be achieved by just dropping 4 oxite and 2 volatiles
|-
|[[Constantan Ingot|Constantan]]
| style="text-align:right;" | 100
| style="text-align:right;" | 10 000
| style="text-align:right;" | 1 000
| style="text-align:right;" | 1 500
| style="text-align:center;" | 1:1
| Copper:Nickel
| can be achieved by dropping 4 oxite and 1 volatile
|}

===Some example fuel mixes===

{| class="wikitable"
! colspan="1" rowspan="2" |Prime
! colspan="1" rowspan="2" |AFR
! colspan="2" rowspan="1" |In: Mols
! colspan="2" rowspan="1" |Result
! colspan="4" rowspan="1" |Out: Mols
|-
!H2
!O2
!Press.
!Temp
!O2
!H2
!Co2
!X
|-
|100 kPa
|2:1
|29
|14
|2 135
|1 953
|1
|3
|82
|33
|-
|200 kPa
|2:1
|59
|29
|4 500
|2 000
|1
|5
|169
|80
|-
|200 kPa
|3:1
|65
|21
|3 400
|1 900
|2
|26
|118
|52
|-
|200 kPa
|4:1
|72
|18
|3 000
|1 800
|1
|40
|99
|42
|-
|200 kPa
|1:1
|43
|43
|3 493
|1 917
|22
|2
|127
|59
|-
|200 kPa
|1:4
|17
|68
|1 646
|1 319
|63
|2
|50
|18
|-
|300 kPa
|2:1
|86
|42
|6 850
|2 109
|2
|7
|242
|115
|-
|500 kPa
|2:1
|143
|69
|11 814
|2 150
|3
|11
|400
|193
|}
</translate>

Centrifuge

2018-02-10T17:06:44Z

OddGod: Added refrence to the furnace which also can produce reagents

<languages/>
<translate>

[[Category:Machines]]
{{Itembox
| image = [[File:ItemKitCentrifuge.png]]
| name = Kit (Centrifuge)
| createdwith = [[Autolathe]], [[Fabricator]]
| cost = 20g [[Iron]], 5g [[Copper]]
}}
{{Structurebox
| name = Centrifuge
| placement = Small Grid
| powerusage =
}}

== Description == 
Takes regents created in the [[Recycler]] or [[Furnace]] through its input and raw ores come out of the output.

== Tips and Tricks == 
Kind of a bug, but if the Centrifuge spits out reagents, feed them in a [[furnace]] they will become precious metal ingots.

</translate>