Stationeers Community Wiki - User contributions [en]

Kit (Atmospherics) H2 Combustor

2023-03-09T19:20:20Z

Xandaros:

[[Category:Atmospherics]]
<languages/>
<translate>
{{Structurebox
| name = H2 Combustor
| image = [[File:Atmospherics front.jpg]]
| power_usage = 20W
| placed_with_item = [[Kit (Atmospherics)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Drill]]
| item_rec1 = [[Kit (Atmospherics)]]
}}

==Purpose==
Burns a mix of volatiles and oxygen to create [[Water]] and heat. A [[Kit (Volume Pump)|Volume pump]] before the Combustor is a must because up to 350 mol may be processed all at once, far too quickly for one to be able to cool using an [[Kit (Atmospherics) Air Conditioner|AC unit]].

To generate electricity with fuel instead, see the [[Kit (Gas Fuel Generator)|Gas Fuel Generator]]. Alternatively, the heat generated by the H2 Combustor may be used with a [[Kit (Stirling Engine)|Stirling Engine]] to generate power at a much lower efficiency.

Using a [[Kit (Heat Exchanger)]] to power a [[Stirling Engine]] is a preferred first step due to it's speed and efficiency on certain planets outside to help cool your water and generate up to 8kW before AC Units are used to get the water down to 0-100 to be consumable, making it possibly a zero-loss system in perfect conditions. Alternatively, the outputs may be air-cooled using radiators on cooler planets or in a vacuum.


==Characteristics==
* Consumes up to 350 mol of [[Fuel]] per tick.
* It converts H2 and O2 to H2O at a conversion ratio of 2:1.
* 2H2 + 1O2 = 1H2O
* Casing is not insulated, will significantly heat up the surrounding environment.
* H2 combuster may be placed in a Vacuum or inside a Frame if the temperature wants to be kept for manufacturing hot gasses.
* In one tick, if given a 2000L input network of fuel at 6MPa, will consume 350 mol of Fuel to output 350 Mol of Water at '''7000''' Celcius.
* Gas output is optional, will output unburned fuel at 4000 Celcius.


==Notes==
* Best not used indoors, output is incredibly difficult to cool down.

{{Logic}}

{| class="wikitable"
|-
! Parameter !! Type !! Access !! Description
|-
| Activate || Boolean || Read/Write || 1 if a device is activated (usually meaning running), otherwise 0.
|-
| On || Boolean || Read/Write || The current state of the device, 0 for off, 1 for on.
|-
| RequiredPower|| Float || Read-only || Idle operating power quantity, does not necessarily include extra demand power.
|-
| Error || Boolean || Read-only || 1 if the device is in error state, otherwise 0.
|-
| Power || Float || Read-only || Can be read to return if the device is correctly powered or not, set via power system, return 1 if powered and 0 if not.
|-
| Setting || Integer || Read/Write || Volume to output on the exhaust pipe (0-100)
|-
| Lock || Boolean || Read/Write || 1 if a device is locked, otherwise 0, can be set in most devices and prevents the user from writing values.
|-
| PrefabHash || Integer || Read-only || The hash of the structure.
|-
| Maximum || Float || Read-only || Maximum setting of the device.
|-
| Ratio || Float || Read-only || Context specific value depending on the device, 0 to based ratio.
|}


==See Also==
* [[Kit (Atmospherics)]]
</translate>

Kit (Battery) Battery

2022-07-24T13:41:44Z

Xandaros: Fix double redirect

#REDIRECT [[Station Battery]]

Station Batteries

2022-07-24T13:41:29Z

Xandaros: Fix double redirect

#REDIRECT [[Station Battery]]

Kit (Battery)

2022-07-24T13:41:05Z

Xandaros: Fix double redirect

#REDIRECT [[Station Battery]]

Stationary Battery

2022-07-24T13:40:35Z

Xandaros: Xandaros moved page Stationary Battery to Station Battery: It's not called Stationary Battery

#REDIRECT [[Station Battery]]

Station Battery

2022-07-24T13:40:34Z

Xandaros: Xandaros moved page Stationary Battery to Station Battery: It's not called Stationary Battery

<translate>

{{Itembox
| name = Kit (Battery)
| image = [[File:{{#setmainimage:ItemKitBattery.png}}]]
| createdwith = [[Electronics Printer]], [[Fabricator]]
| cost = 20g [[Gold Ingot|Gold]], 20g [[Copper Ingot|Copper]], 20g [[Steel Ingot|Steel]]
}}
{{Structurebox
| name = Stationary Battery
| image = [[File:Kit (Battery) installed.png]]
| placed_with_item = [[Kit (Battery)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Hand Drill]]
| item_rec1 = [[Kit (Battery)]]
}}

== Description == 
[[Kit (Battery)]] is used to create stationary battery cells, which can provide big and stable energy storage or energy buffer for your power needs. Its energy storage is 3600000J or 1kWh. Any battery loses stored power, if is in a cold atmosphere.

== Usage ==
As a battery's power throughput is only limited by the power demanded and supplied, it can take any amount of power and supply any amount of power. This means that it can exceed the ratings of even heavy cables. Due to their unlimited throughput,''' connecting a battery's output to another battery's input will act like a short circuit'''.

Additionally it is advised to follow these rules:
# '''Never shortcut any battery''' - no loops!
# To build a cascade of batteries (e.g. a stationary battery near solar panels and an APC at base power input), separate networks with transformers.
# Prefer a tree-like (or star-like) scheme of power supply over chain (cascades). It is better to have a battery on each of separate subnets (ex. production floor and gas processing floor), even if you will not use its full potential.
# Always separate electrical networks with power generation (solid generators, solar panels, etc.) and power consumers. Do it with batteries and APCs. Rule of a thumb: input - generators only, output - consumers only.
# Never connect a solid fuel generator to a battery using standard cables - only use heavy cables. A battery will make a generator produce full power - 20 000 W which is 4 times greater of that standard wire can pass through.
# When making major changes of a power network (especially a very spread one), always take out batteries from APCs or just cut the cables connecting the batteries with that network (input and output) - it can save a lot of cables from burning.

{{Data Network Header}}

=== Mode Values ===
This shows the values of the "Mode" property, mapped to what the display will show.
{| class="wikitable"
|-
! Value !! Display
|-
| 0 || no blocks
|-
| 1 || 1 block, red, blinking
|-
| 2 || 1 block, red
|-
| 3 || 2 blocks, orange
|-
| 4 || 3 blocks, yellow
|-
| 5 || 4 blocks, green
|-
| 6 || 5 blocks, blue
|}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Mode || Integer || Expects values 0-6. Setting this, will let the charge display of the Battery show the according charge value for about a second. Afterwards it will switch back to showing the actual charge value. This influences the "Mode" output as well. (See [[#Mode_Values|Mode Values]].)
|-
| Lock || Boolean || Locks the Battery, when set to 1. Unlocks it, when set to 0.
|-
| On || Boolean || Turns the Battery on, when set to 1. Turns it off, when set to 0.
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Mode || Integer || Returns the current charge display value as a value in the range 0-6. (See [[#Mode_Values|Mode Values]].)
|-
| Error || Boolean || Returns whether the Battery is flashing an error. (0 for no, 1 for yes)
|-
| Lock || Boolean || Returns whether the Battery is locked. (0 for no, 1 for yes)
|-
| Charge || Integer || Returns the current charge of the Battery in watt*tic.
|-
| Maximum || Integer || Returns the maximum charge of the Battery in watt*tic.
|-
| Ratio || Float || Returns a range from 0.0 to 1.0. Returns the current charge percentage of the battery.
|-
| PowerPotential || Integer || Returns the current power potential at the input of the Battery in watts.
|-
| PowerActual || Integer || Returns the amount of power, currently being output by the Battery in watts.
|-
| On || Boolean || Returns whether the Battery is currently on. (0 for no, 1 for yes)
|}

== Bugs ==
* The Data Network properties are accessible from all cable connectors.
</translate>

Kit (Automated Rocket Silo)

2022-07-21T21:57:07Z

Xandaros:

[[Category:Rocketry]]
{{itembox
| name = Kit (Automated Rocket Silo Module)
| image = [[File:Kit Automated Rocket Silo Module.png|thumb]]
| createdwith = [[Electronics Printer]] '''Mk2'''
| cost = 10g [[Gold]], 20g [[Steel]], 25g [[Electrum]], 15g [[Invar]], 25g [[Astroloy]]
}}
{{Structurebox
| name = Automated Rocket Silo Module
| image = [[File:Automated Rocket Silo Module.png|thumb]]
| placed_with_item = [[Kit (Automated Rocket Silo)]]
| placed_on_grid = Large Grid

| item_rec1 = [[Kit (Automated Rocket Silo)]]

| const_with_tool2 = [[Welding Torch]]
| const_with_item2 = 10 x [[Steel Sheets]]
| item_rec2 = 10 x [[Steel Sheets]]

| const_with_tool3 = [[Welding Torch]]
| const_with_item3 = 10 x [[Plastic Sheets]]
| item_rec3 = 10 x [[Plastic Sheets]]

| const_with_item4 = 5 x [[Electronic Parts]]
| item_rec4 = 5 x [[Electronic Parts]]
}}

The ExMin autonomous silo module provides storage for ores collected by the [[Kit (Automated Rocket Ore Mining)|Automated Rocket Ore Mining Module]], ices collected by the [[Kit (Automated Rocket Ice Mining)|Automated Rocket Ice Mining Module]] and 'space junk' salvaged by the [[Kit (Automated Rocket Salvage)|Automated Rocket Salvage Module]]. In other words, it holds 'medium-sized dry goods'. 
The silo module must be connected to a mining or salvaging module by a correctly placed [[Kit (Automated Rocket Coupling)|Automated Rocket Coupling Module]] (Down) or [[Kit (Automated Rocket Coupling)|Automated Rocket Coupling Module]] (Up), in order for material to pass into the silo. 
The silo module must also be powered when on the launch pad. It is 'on' by default, but can be turned off with logic if needed. 
The module can also be attached to a Chute system in order to connect it to import/export networks. 
To extract resources from the silo module, you must set its state to 'OPEN' using logic.

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Mode || Integer || Unknown.
|-
| Lock || Boolean || Unknown.
|-
| ClearMemory || Boolean || Resets internal counters, such as ExportCount, to zero when set to 1.
|-
| Activate || Boolean || Unknown
|-
| Setting || Float || Unknown
|-
| Open || Boolean || Set to 1 to open the silo and begin exporting its contents through the chute, or set to 0 to stop exporting.
|-
| On || Boolean || Turns the silo's power on (1) or off (0).
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Mode || Integer || Unknown
|-
| Maximum || Integer || Unknown
|-
| ImportCount || Integer || The number of stacks imported into the silo since the memory was last cleared.
|-
| ExportCount || Integer || The number of stacks exported from the silo since the memory was last cleared. Note that if the silo was used to mine or salvage, most if not all stacks will not be full stacks.
|-
| Error || Boolean || Returns whether the Silo is flashing an error. (0 for no, 1 for yes)
|-
| Activate || Integer || Unknown.
|-
| Setting || Integer || Unknown
|-
| RequiredPower || Float || Returns the current amount of power, required by the Silo, in watts.
|-
| Ratio || Float || Unknown
|-
| Quantity || Integer || The number of item stacks currently held by the silo. Note that if the silo was used to mine or salvage, most if not all stacks will not be full stacks.
|-
| PrefabHash || Integer || Unknown
|-
| Power || Boolean || Returns whether the Silo is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Returns whether the Silo is currently open and exporting items. (0 for no, 1 for yes)
|-
| On || Boolean || Returns whether the Silo is turned on. (0 for no, 1 for yes)
|}

Kit (Automated Rocket Ore Mining)

2022-07-21T21:56:34Z

Xandaros:

[[Category:Rocketry]]
{{itembox
| name = Kit (Automated Rocket Ore Mining Module)
| image = [[File:Kit Automated Rocket Ore Mining Module.png|thumb]]
| createdwith = [[Electronics Printer]] '''Mk2'''
| cost = 15g [[Copper]], 30g [[Steel]], 25g [[Electrum]], 15g [[Constantan]], 20g [[Stellite]]
}}
{{Structurebox
| name = Automated Rocket Ore Mining Module
| image = [[File:Automated Rocket Ore Mining Module.png|thumb]]
| placed_with_item = [[Kit (Automated Rocket Ore Mining)]]
| placed_on_grid = Large Grid

| item_rec1 = [[Kit (Automated Rocket Ore Mining)]]

| const_with_tool2 = [[Welding Torch]]
| const_with_item2 = 10 x [[Steel Sheets]]
| item_rec2 = 10 x [[Steel Sheets]]

| const_with_tool3 = [[Welding Torch]]
| const_with_item3 = 10 x [[Plastic Sheets]]
| item_rec3 = 10 x [[Plastic Sheets]]

| const_with_item4 = 10 x [[Electronic Parts]]
| item_rec4 = 10 x [[Electronic Parts]]
}}

The ExMin autonomous ore miner harvests metallic ores from asteroids and planets in the local region of space. Its range - and therefor how much ore it collects - is strictly determined by the rocket's fuel quantity. 
The module must be connected to a [[Kit (Automated Rocket Silo)|Automated Rocket Silo Module]] by a properly placed [[Kit (Automated Rocket Coupling)|Automated Rocket Coupling Module]] (Down) or [[Kit (Automated Rocket Coupling)|Automated Rocket Coupling Module]] (Up), in order for the ore to pass from the collector unit into the silo. 
It has two modes - active (1), and inactive (0), which should only be triggered when the rocket has arrived in space and is idle (mode 4).

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Mode || Boolean || Unknown
|-
| Lock || Boolean || Unknown
|-
| ClearMemory || Boolean || Resets internal counters, such as ExportCount, to zero when set to 1.
|-
| Activate || Boolean || Sets the mode of the module. Set to 0 to stop mining, or 1 to begin mining. Mining should only occur when the [[Kit (Automated Rocket Automation)|Automated Rocket Automation Module]]'s Mode variable is 4 and the CollectableGoods variable is 1.
|-
| Setting || Float || Unknown
|-
| Open || Boolean || Unknown
|-
| On || Boolean || Unknown
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Mode || Integer || The current mode of the module. 0 means idle, 1 means mining.
|-
| Maximum || Integer || Unknown
|-
| Lock || Boolean || Unknown
|-
| ImportCount || Integer || Unknown
|-
| ExportCount || Integer || Unknown
|-
| Error || Boolean || Returns whether the Miner is flashing an error. Typically an error will be indicating if the coupler and silo are not correctly configured. (0 for no, 1 for yes)
|-
| Activate || Integer || The desired activation state. 0 means idle, 1 means mining.
|-
| Setting || Integer || Unknown
|-
| RequiredPower || Integer || Returns the current amount of power, required by the Miner, in watts.
|-
| Ratio || Float || Unknown
|-
| PrefabHash || Integer || Unknown
|-
| Power || Boolean || Returns whether the Miner is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Unknown.
|-
| On || Boolean || Returns whether the Miner is turned on. (0 for no, 1 for yes)
|}

Kit (Automated Rocket Ice Mining)

2022-07-21T21:56:03Z

Xandaros:

[[Category:Rocketry]]
{{itembox
| image = [[File:ItemKitModularRocketIceMining.png]]
| name = Kit (Automated Rocket Ice Mining Module)
| createdwith = [[Electronics Printer]] '''Mk2'''
| cost = 15g [[Copper]], 30g [[Steel]], 25g [[Electrum]], 15g [[Invar]], 25g [[Astroloy]]
}}
{{Structurebox
| name = Automated Rocket Ice Mining Module
| image = [[File:Automated Rocket Ice Mining Module.png|thumb]]
| placed_with_item = [[Kit (Automated Rocket Ice Mining)]]
| placed_on_grid = Large Grid

| item_rec1 = [[Kit (Automated Rocket Ice Mining)]]

| const_with_tool2 = [[Welding Torch]]
| const_with_item2 = 10 x [[Steel Sheets]]
| item_rec2 = 10 x [[Steel Sheets]]

| const_with_tool3 = [[Welding Torch]]
| const_with_item3 = 10 x [[Plastic Sheets]]
| item_rec3 = 10 x [[Plastic Sheets]]

| const_with_item4 = 10 x [[Electronic Parts]]
| item_rec4 = 10 x [[Electronic Parts]]
}}

The ExMin autonomous ice miner is a purpose-built, robotic ice harvester, able to mine ice ores from asteroids and planets in the local region of space. Its range - and therefor how much ore it collects - is strictly determined by the rocket's fuel quantity. 
The module must be connected to a [[Kit (Automated Rocket Silo)|Automated Rocket Silo Module]] by a properly placed [[Kit (Automated Rocket Coupling)|Automated Rocket Coupling Module]] (Down) or [[Kit (Automated Rocket Coupling)|Automated Rocket Coupling Module]] (Up), in order for the ice to pass from the collector unit into the silo. 
It has two modes - active (1), and inactive (0), which should only be triggered when the rocket has arrived in space and is idle (mode 4).

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Mode || Boolean || Unknown
|-
| Lock || Boolean || Unknown
|-
| ClearMemory || Boolean || Resets internal counters, such as ExportCount, to zero when set to 1.
|-
| Activate || Boolean || Sets the mode of the module. Set to 0 to stop mining, or 1 to begin mining. Mining should only occur when the [[Kit (Automated Rocket Automation)|Automated Rocket Automation Module]]'s Mode variable is 4 and the CollectableGoods variable is 1.
|-
| Setting || Float || Unknown
|-
| Open || Boolean || Unknown
|-
| On || Boolean || Unknown
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Mode || Integer || The current mode of the module. 0 means idle, 1 means mining.
|-
| Maximum || Integer || Unknown
|-
| Lock || Boolean || Unknown
|-
| ImportCount || Integer || Unknown
|-
| ExportCount || Integer || Unknown
|-
| Error || Boolean || Returns whether the Miner is flashing an error. Typically an error will be indicating if the coupler and silo are not correctly configured. (0 for no, 1 for yes)
|-
| Activate || Integer || The desired activation state. 0 means idle, 1 means mining.
|-
| Setting || Integer || Unknown
|-
| RequiredPower || Integer || Returns the current amount of power, required by the Miner, in watts.
|-
| Ratio || Float || Unknown
|-
| PrefabHash || Integer || Unknown
|-
| Power || Boolean || Returns whether the Miner is turned on and receives power. (0 for no, 1 for yes)
|-
| Open || Boolean || Unknown.
|-
| On || Boolean || Returns whether the Miner is turned on. (0 for no, 1 for yes)
|}

Kit (Automated Rocket Automation)

2022-07-21T21:49:38Z

Xandaros:

[[Category:Rocketry]]
{{itembox
| name = Kit (Automated Rocket Automation Module)
| image = [[File:Kit Automated Rocket Automation Module.png|thumb]]
| createdwith = [[Electronics Printer]] '''Mk2'''
| cost = 10g [[Gold]], 40g [[Copper]], 25g [[Steel]], 30g [[Electrum]], 30g [[Invar]], 15g [[Solder]], 25g [[Stellite]], 10g [[Inconel]]
}}
{{Structurebox
| name = Automated Rocket Automation Module
| image = [[File:Automated Rocket Automation Module.png|thumb]]
| placed_with_item = [[Kit (Automated Rocket Automation)]]
| placed_on_grid = Large Grid

| item_rec1 = [[Kit (Automated Rocket Automation)]]

| const_with_tool2 = [[Welding Torch]]
| const_with_item2 = 25 x [[Steel Sheets]]
| item_rec2 = 25 x [[Steel Sheets]]

| const_with_tool3 = [[Welding Torch]]
| const_with_item3 = 25 x [[Plastic Sheets]]
| item_rec3 = 25 x [[Plastic Sheets]]

| const_with_item4 = 20 x [[Electronic Parts]]
| item_rec4 = 20 x [[Electronic Parts]]
}}

The automation module completes the rocket. It passes logic to its respective components.

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| ClearMemory || Boolean || Resets internal counters, such as ExportCount, to zero when set to 1.
|-
| Activate || Integer || Set the desired mode of the rocket. 
1 = Launch to Space. 
2 = Travel in Space. This can be used to find new ice, ore, or salvage. 
4 = Stop Traveling in Space. 
5 = Return to the Launch Pad.
|-
| Setting || Float || Unknown
|-
| Open || Boolean || Unknown
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Mode || Integer || The current mode of the rocket. 
0 = Idle on the Launch Pad. The rocket can be launched by setting the Activate variable to 1. 
1 = Launching to Space. This will automatically transition to 4 after a short time. 
2 = Traveling in Space. The rocket will continue traveling unless you set the Activate variable to to 4 or 5, such as when the CollectableGoods variable changes to 1. 
3 = Arriving at Location in Space. This is the automatic transition state between mode 2 and 4. 
4 = Idle in Space. If the CollectableGoods variable is 1 you can now mine or salvage, else if 0 then you can find a new mining or salvaging spot by setting the Activate variable to 2. 
5 = Returning to Launch Pad. This is not automatic, the rocket must be commanded to return by setting the Activate variable to 5. 
6 = Returned to Launch Pad (Seemingly unused; you will see mode 0 instead). 
7 = Out of Fuel in Space (Can still deconstruct the launch tower to get parts back?).
|-
| Maximum || Integer || Unknown
|-
| ImportCount || Integer || Unknown
|-
| Fuel || Float || The quantity of onboard fuel, in moles.
|-
| ExportCount || Integer || Unknown
|-
| CollectableGoods || Boolean || Whether the rocket can currently harvest ice, ore, or salvage. If 0, then the rocket must be moved to a new area by setting Mode to 2.
|-
| Setting || Integer || Unknown
|-
| ReturnFuelCost || Integer || The amount of fuel needed, in moles, for the rocket to safely return to the launch pad. The rocket does not actually consume this much fuel to return.
|-
| Ratio || Float || Unknown
|-
| PrefabHash || Integer || Unknown
|-
| Open || Boolean || Unknown. Possibly commands all silo modules to open or close.
|}

Chute

2022-07-17T19:43:59Z

Xandaros: Redirected page to Chutes

#REDIRECT [[Chutes]]

Kit (SDB Hopper)

2022-07-15T21:54:00Z

Xandaros:

<languages/>
<translate>


[[Category:Machines]]
[[Category:Chutes]]
[[Category:Regulators]]
{{Itembox
| name = Kit (SDB Hopper)
| image = [[File:ItemKitSDBHopper.png]]
| createdwith = [[Special:MyLanguage/Autolathe|Autolathe]], [[Special:MyLanguage/Fabricator|Fabricator]]
| cost = 15g [[Iron]]
| stacks = 10
}}
{{Structurebox
| name = SDB Hopper
| image = [[File:ItemSDBHopper.png]]
| placed_with_item = [[Kit (SDB Hopper)]]
| placed_on_grid = Anywhere 1x1
| item_rec1 = [[Kit (SDB Hopper)]]
| item_rec2 = 4x [[Iron Sheets]]
| decon_with_tool1 = [[Angle Grinder]]
| decon_with_tool2 = [[Hand Drill]]
}}
{{Structurebox
| name = SDB Hopper Advanced
| image = [[File:ItemSDBHopperAdvanced.png]]
| power_usage = 25W
| placed_with_item = [[Kit (SDB Hopper)]]
| placed_on_grid = Anywhere 1x1
| item_rec1 = [[Kit (SDB Hopper)]]
| item_rec2 = 4x [[Iron Sheets]]
| decon_with_tool1 = [[Angle Grinder]]
| decon_with_tool2 = [[Hand Drill]]
| prefab_hash = 467225612
}}

==Description== 
SDB Hopper is a structure that connected to chutes will insert any item in the chute network that enter in the hole. There are two variants of this item, the [[SDB Hopper]] that is a simple funnel, and the [[SDB Hopper Advanced]] that support logic signal to control the hole (if keep it open or close) and and retrieve the total items passed through the hole.


{{Data Network Header}}
This properties are only for the [[SDB Hopper Advanced]] version


{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Lock || Boolean || Unknown.
|-
| Open || Boolean || Close or open the [[SDB Hopper Advanced]].
|}


{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Import Count || Boolean || Total items inserted.
|-
| Lock || Boolean || Unknown.
|-
| Open || Boolean || If the [[SDB Hopper Advanced]] is open or close.
|-
| PrefabHash || Integer || 0 or 467225612
|}

</translate>

==Notes==
* The SDB Hopper is not airtight, even on the top face

Integrated circuit

2022-07-13T16:52:08Z

Xandaros: Redirected page to Integrated Circuit (IC10)

#REDIRECT [[Integrated Circuit (IC10)]]

Guide (Airlock) Atmosphere to Atmosphere

2022-07-12T20:37:58Z

Xandaros:

[[Category:Guides]][[Category:Atmospherics]]
<languages/>
<translate>
==Description==
An Atmosphere to Atmosphere Airlock is a [[Room]] that can evacuate its internal volume and refill it with either of the two differing [[Atmosphere]]s it connects. It has two airtight [[Portal]]s which do not open simultaneously. An Atmosphere to Atmosphere Airlock allows passage between two environments without the exchange of [[Gas]]es or [[Pressure]].

An Atmosphere to Atmosphere Airlock can be controlled automatically using a [[Circuitboard (Advanced Airlock)]] installed within a [[Console]] which will refer to each of the two separated environments as either "interior" or "exterior".

When activated with the interior-portal open, the system will automatically close the interior-portal and will activate the interior-[[Active Vent|Active-Vent]] to try to evacuate the interior-atmosphere from the airlock chamber. Once a total vacuum is achieved within all of the [[Large Grid Atmosphere|Large Grid Volume]]s in which selected [[Gas Sensor]]s reside, the airlock will activate the exterior-Active-Vent to try to pressurize the chamber with exterior-atmosphere. Only after the internal pressure within all of the Large Grid Volumes in which selected Gas Sensors reside equals or exceeds the "External ###Pa" specified in the [[Circuitboard (Advanced Airlock)#Settings|Circuitboard's settings]] will the exterior-portal automatically open.

When activated with the exterior-portal open, a similar process to the above is executed, swapping interior for exterior, exterior for interior, and the final airlock pressure governed by the "Internal ###Pa" setting instead.

==Materials==
Material requirements for a minimnum Atmosphere to Atmosphere Airlock are:
* 2 x [[Portal]]: variants of either [[Kit (Airlock)]], [[Kit (Blast Door)]], [[Kit (Door)]], or [[Kit (Docking Port)]]
* 1 x [[Kit (Consoles) Console|Kit (Consoles) Console]]
* 1 x [[Circuitboard (Advanced Airlock)]]
* 1 x [[Glass Sheets]]
* 1 x [[Data Disk]]
* 1 x [[Kit (Sensors) Gas Sensor]]
* 2 x [[Kit (Active Vent)]]
* 2 x [[Kit (Passive Vent)]] (optional)
* 1 x [[Kit (Flashing Light)]] (optional)
* 1 x [[Kit (Power Controller)]] (optional)
* 4 x [[Kit (Pipe)]]
* # x [[Cable Coil]]

==Construction==
A minimum Atmosphere to Atmosphere Airlock can be constructed using the following instructions:

# Place two [[Portal]]s one [[Large Grid]] apart with the power and data ports facing into the airlock's interior.
# Using the [[Labeller]], rename each portal as "Interior-Door" and "Exterior-Door" appropriately.
# Ensure the "Exterior-Door" is OPEN, and the "Interior-Door" is CLOSED.
# Enclose the six remaining sides of the airlock chamber with airtight [[Frames]], [[Walls]], or [[Windows]].
# Place [[Console]], [[Active Vent]]s, [[Gas Sensor]], and optional [[Flashing Light]] and [[Power Controller]] somewhere within the airlock's interior.
# Ensure all placed devices are attached to the same [[Wire Network]] including the portals' power and data ports.
# Ensure the airlock's wire network is connected to an active [[Power Supply]] and all devices can receive power.
# Using the Labeller, rename each Active Vent as "Interior Vent" and "Exterior Vent" appropriately.
# Attach a [[Pipe Network]] to each Active Vent large enough to hold the volume of the airlock or pass it through to a [[Passive Vent]] placed in the "interior" or "exterior" environment.
# Ensure "interior" and "exterior" pipe networks are not connected together or to any other pipe networks.[[File:Guide adv airlock bare.jpg|thumb|advanced airlock with 2 walls removed for better visibility]]
# Insert [[Circuitboard (Advanced Airlock)]] into the console, then place the [[Glass Sheet]] onto the console.
# Insert [[Data Disk]] into the side slot of Console then power on the Console.[[File:Guide adv airlock config0.png|thumb|slot to insert data disk]]
# Use the console's up and down arrows to scroll through the list of devices. Click to select. Click again to deselect if incorrect
# Find and click "Exterior-Door" followed by all caps and green "EXTERIOR". NOTE: SELECT THIS FIRST![[File:Guide adv airlock config1.png|thumb|make sure to click the exterior door and vent first]]
# Ensure the Exterior-Door's lock-indicator has turned from green to red.
# Find and click "Exterior-Vent" followed by all caps and green "EXTERIOR". NOTE: SELECT THIS SECOND!
# Find and click "Interior-Door" followed by all caps and green "INTERIOR".
# Ensure the Interior-Door's lock-indicator has turned from green to red.
# Find and click "Interior-Vent" followed by all caps and green "INTERIOR".
# Find and click "Gas Sensor" followed by all caps and green "SENSOR".
# Find and click "Flashing Light" followed by all caps and green "LIGHT". (optional)
# Toward the top left of the Console find and click "External ###Pa". Set to match the exterior-environment's typical pressure. (optional)
# Toward the top right of the Console find and click "Internal ###Pa". Set to match the interior-environment's typical pressure. (optional)[[File:Guide adv airlock config3.png|thumb|set pressures appropriate to each side]]
# Remove Data Disk from the side slot of Console.
 If there is an error the console screen will say so and the power light will flash yellow.

==Console Slaves==
Additional consoles are useful when airlocks become large or remote control is desired. Multiple [[Circuitboard (Advanced Airlock)#Console Slave|Console Slave]]s can be attached using the following instructions:

# Using the [[Labeller]], rename the original [[Console]] as "Master Console".
# Place additional consoles such that they all attached to the same [[Wire Network]] connected to the "Master Console".
# Using the Labeller, rename each additional console as "Slave Console 1", "Slave Console 2" ...
# Insert [[Circuitboard (Advanced Airlock)]] into each additional console, then place a [[Glass Sheet]] onto the additional consoles.
# Insert [[Data Disk]] into the side slot of the powered on "Master Console".
# Use the "Master Console's" up and down arrows to scroll through the list of devices. Click to select. Click again to deselect if incorrect
# Find and click "Slave Console #" followed by all caps and green "MAKE SLAVE" for each additional console.
# Remove Data Disk from the side slot of "Master Console".
# Power on each additional console.
 If there is an error the console screen will say so and the power light will flash yellow.

==Troubleshooting==
When powered, all associated doors and vents are locked, preventing their manual use even when power is subsequently denied. This can be a problem when trapped within an airlock during a power outage. Best practise is to ensure the airlock's wire network is connected to an emergency [[Power Supply]] such as a [[Battery Cell]] equipped [[Power Controller]].

If the "External #Pa" or "Internal #Pa" are set to 0, the corresponding pressurization phase will be skipped, speeding up the cycle time, but can result in large wind currents when doors open.

A pressurization phase will stall if there is not enough gas available to the interior or exterior [[Active Vent]] to reach the set "Internal #Pa" or "External #Pa" specified in the [[Circuitboard (Advanced Airlock)#Settings|Circuitboard's settings]]. Such stalled pressurization can be skipped by clicking the yellow "Cancel Pressurize" button on a console.

A depressurization phase will stall if a complete vacuum cannot be achieved within the [[Large Grid Atmosphere|Large Grid Volume]]s in which all selected [[Gas Sensor]]s reside. Such stalled depressurization can be skipped by clicking the yellow "Cancel Depressurize" button on a console, but atmospheric mixing may occur. In larger airlocks, ensure there is one Gas Sensor per Large Grid to prevent premature repressurization and the resulting mixture of interior and exterior atmospheres.

==See Also==
* [[Guide (Airlock)]]
* [[Guide (Airlock) Atmosphere to Vacuum]]
* [[Guide (Airlock) Docking Ports]]

* [[Circuitboard (Advanced Airlock)]]
* [[Circuitboard (Airlock)]]
* [[Kit (Airlock)]]
</translate>

Filtration

2022-07-12T15:45:30Z

Xandaros: Didn't know this page existed... In hindsight, maybe this redirect should be removed and Kit (Atmospherics) Filtration renamed to "Filtration". Same for the other atmospherics devices

#REDIRECT [[Kit (Atmospherics) Filtration]]

Filtration

2022-07-12T15:42:19Z

Xandaros: Redirected page to Kit (Atmospherics)

#REDIRECT [[Kit (Atmospherics)]]

Drill

2022-07-12T15:36:10Z

Xandaros: Turn this page into a disambiguation page - somebody searching for "drill" might be looking for the Mining Drill

'''Drill''' may refer to:
* [[Hand Drill]]
* [[Mining Drill]]

{{Disambiguation}}

Pipes

2022-07-12T15:23:38Z

Xandaros: Remove superfluous mentions of Mk2 machines for "created with"

<languages />
<translate>

[[Category:Atmospherics]]
{{Itembox
| name = Kit (Pipe)
| image = [[File:{{#setmainimage:ItemKitPipe.png}}]]
| cost = 0.5g [[Iron]]
| stacks = Yes, 20
| volume = 100L, 60Mpa
| createdwith = [[Hydraulic Pipe Bender]]
}}
{{Itembox
| name = Kit (Insulated Pipe)
| image = [[File:{{#setmainimage:ItemKitInsulatedPipe.png}}]]
| cost = 1g [[Silicon]], 1g [[Steel]]
| stacks = Yes, 20
| volume = 100L, 60Mpa
| createdwith = [[Hydraulic Pipe Bender]]
}}

Pipes are used to transport gas. Pipes are one of the possible types of inputs/outputs from a structure (the others being [[Cables]], [[Chutes]], and [[Kit (Liquid Pipe)]]).

=== Tips === 


* Pipes can store some gas inside of them, which can be used with small airlocks to store gas when depressurizing
* Pipes will burst if the pressure differential between the inside pressure and outside atmosphere is greater than 60,795KPa (60MPa) (plus a random check to allow for short bursts over this limit)
* Pipes will be stressed (make a noise) when the pressure difference between inside and outside the pipe is greater than 48,636kPa.
* A contiguous pipe (not interrupted by valves, regulators, pumps etc.) of any length, will always have the same pressure, temperature and mixture over its entire length. No matter at what point of the pipe you're introducing new gases into the pipe, they will instantly and evenly "average out" over the entire pipe.

==Variations== 
Can be painted individually or by the stack with [[Spray Can]]. (consumes a single 'use' of the can either way, far more efficient to paint a full stack)

===Insulated===
Insulated pipes greatly reduce the exchange of heat between the pipe and it's surrounding environment

Pipes:
<gallery mode='traditional'>
Image: ItemPipeStraight.png | Straight
Image: ItemPipeCorner.png | Corner
Image: ItemPipeTJunction.png | T-Junction
Image: ItemPipeCrossJunction.png | 4-Way Junction
Image: ItemPipeCrossJunction5.png | 5-Way Junction
Image: ItemPipeCrossJunction6.png | 6-Way Junction
Image: ItemPipeCrossJunction3.png | 3-Way Corner
Image: ItemPipeCrossJunction4.png | 4-Way Corner
</gallery>
Insulated Pipes:
<gallery mode='traditional'>
Image: ItemInsulatedPipeStraight.png | Straight
Image: ItemInsulatedPipeCorner.png | Corner
Image: ItemInsulatedPipeTJunction.png | T-Junction
Image: ItemInsulatedPipeCrossJunction.png | 4-Way Junction
Image: ItemInsulatedPipeCrossJunction5.png | 5-Way Junction
Image: ItemInsulatedPipeCrossJunction6.png | 6-Way Junction
Image: ItemInsulatedPipeCrossJunction3.png | 3-Way Corner
Image: ItemInsulatedPipeCrossJunction4.png | 4-Way Corner
</gallery>

</translate>

Pipe Label

2022-07-12T15:22:04Z

Xandaros: Add link to pipe

[[Category:Atmospherics]]
{{Itembox
| name = Pipe Label
| image = [[File:ItemPipeLabel.png]]
| stacks = 20
| cost = 1g [[Iron Ingot]]
}}

== Description ==
Attaches to a straight piece of [[pipe]] which can be customized with the [[Labeller]] to display text onto the pipe.